Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or analog, click on price.
Citation - Injection pump-typical > Chevrolet EPC Online Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| № | Name | Ext. inf. | A* | Part number | A | Part number, Price per Unit., $ |
| 001 | Screw, cvr hold down | - | - | |||
| 002 | Washer, cvr screw lock | - | - | |||
| 003 | Washer, cvr screw flat | - | - | |||
| 004 | Wire asm, solenoid | - | - | |||
| 005 | Nut, term contact lock | - | - | |||
| 006 | Nut, term contact | - | - | |||
| 007 | Washer, term contact lock | - | - | |||
| 008 | Washer, term contact | - | - | |||
| 009 | Washer, term insulating | - | - | |||
| 010 | Solenoid, cold advB (350N) W/FED, CALIF | B (350N) W/FED, CALIF | 01 | 15529646 | - | - |
| 011 | Pin, vac module drB (350N) | B (350N) | 01 | 14067406 | - | - |
| 012 | Screw, face cam | - | - | |||
| 013 | Cam, face | - | - | |||
| 014 | Washer, throttle shaft seal(*1) | - | - | |||
| 015 | Screw, head locating | - | - | |||
| 016 | Screw, vent | - | - | |||
| 017 | Screw, fuel adjust | - | - | |||
| 018 | Nut, fuel adj screw | - | - | |||
| 019 | Ring, dr shaft ret(*1) | - | - | |||
| 020 | Lever asm, rocker | - | - | |||
| 021 | Ring, pin ret(*1) | - | - | |||
| 022 | Pin, rocker lever | - | - | |||
| 023 | Screw, servo adv adj | - | - | |||
| 024 | Plunger, servo adv | - | - | |||
| 025 | Plug, piston-spring side | - | - | |||
| 025 | Seal, adv plungerB (350N) W/FED, CALIF | B (350N) W/FED, CALIF | 01 | 22530034 | - | - |
| 026 | Seal, adv piston holeB (350N) | B (350N) | 01 | 14067418 | - | - |
| 026 | Seal, adv piston holeB (350N) W/FED, CALIF | B (350N) W/FED, CALIF | 01 | 14067418 | - | - |
| 027 | Spring, light load adv | - | - | |||
| 028 | Valve, servo adv | - | - | |||
| 029 | Seal, hd locating scrB (350N) | B (350N) | 01 | 14067415 | - | - |
| 030 | Screw, head locating | - | - | |||
| 031 | Pin, cam advance | - | - | |||
| 032 | Seal, adv scr hole plgB (350N) | B (350N) | 01 | 14067410 | - | - |
| 033 | Plug, adv screw hole | - | - | |||
| 034 | Screw, gov linkage hook | - | - | |||
| 035 | Linkage asm, governor | - | - | |||
| 036 | Hook, gov linkage | - | - | |||
| 037 | Hook asm, gov linkage | - | - | |||
| 038 | Spring, gov linkage hook | - | - | |||
| 039 | Stud, gov guide | - | - | |||
| 040 | Seal, housing press tapB (350N) | B (350N) | 01 | 15529632 | - | - |
| 040 | Seal, housing press tapB (350N) W/FED, CALIF | B (350N) W/FED, CALIF | 01 | 15529632 | - | - |
| 041 | Block, guide stud | - | - | |||
| 042 | Spring, min-max | - | - | |||
| 043 | Washer, max spd spring | - | - | |||
| 044 | Rod, min-max gov push | - | - | |||
| 045 | Sleeve, min-max gov | - | - | |||
| 046 | Arm & compensator, gov temp | - | - | |||
| 047 | Sleeve, thrust | - | - | |||
| 048 | Washer, thrust sleeve | - | - | |||
| 049 | Weight, governor | - | - | |||
| 050 | Ring, gov cage ret | - | - | |||
| 051 | Retainer, gov wtB (350N) | B (350N) | 01 | 14067405 | - | - |
| 052 | Hub, weight ret | - | - | |||
| 053 | Retainer asm, gov weight | - | - | |||
| 053 | Ring, flex retB (350N) | B (350N) | 01 | 14063880 | - | - |
| 054 | Seal, hyd hdB (350N) | B (350N) | 01 | 15593366 | - | - |
| 055 | Roller, cam | - | - | |||
| 056 | Shoe, roller cam | - | - | |||
| 057 | Spring, leaf | - | - | |||
| 058 | Screw, leaf spring adj | - | - | |||
| 059 | Plunger, rotor | - | - | |||
| 060 | Rotor, plunger | - | - | |||
| 061 | Valve, delivery | - | - | |||
| 062 | Spring, delivery vlv | - | - | |||
| 063 | Stop, delivery vlv(*1) | - | - | |||
| 064 | Screw, delivery vlv | - | - | |||
| 065 | Cap, transfer pump end | - | - | |||
| 066 | Plate, pump press | - | - | |||
| 067 | Screen, inlet filter | - | - | |||
| 068 | Ring, screen ret | - | - | |||
| 069 | Plug, end play adj | - | - | |||
| 070 | Spring, regulating | - | - | |||
| 071 | Piston, regulating | - | - | |||
| 072 | Seal, inlet filter screen(*1) | - | - | |||
| 073 | Regulator, transfer pump | - | - | |||
| 074 | Pin, reg roll | - | - | |||
| 075 | Liner, transfer pump | - | - | |||
| 076 | Blade, transfer pump | - | - | |||
| 077 | Spring, pump blade | - | - | |||
| 078 | Ring, liner locating | - | - | |||
| 079 | Retainer, rotor | - | - | |||
| 080 | Seal, transfer pumpB (350N) | B (350N) | 01 | 15529635 | - | - |
| 081 | Connector, fuel line | - | - | |||
| 082 | Screw, locking plate | - | - | |||
| 083 | Plate, locking | - | - | |||
| 084 | Washer, locking plate | - | - | |||
| 085 | Head, rotor | - | - | |||
| 086 | Plug, power side | - | - | |||
| 086 | Seal, adv piston hole plug(*1) | - | - | |||
| 087 | Seal, adv piston holeB (350N) | B (350N) | 01 | 14067418 | - | - |
| 087 | Seal, adv piston holeB (350N) W/FED, CALIF | B (350N) W/FED, CALIF | 01 | 14067418 | - | - |
| 088 | Piston asm, servo adj | - | - | |||
| 089 | Gasket, timing window cvr(*1) | - | - | |||
| 090 | Cover, timing | - | - | |||
| 091 | Plate, name | - | - | |||
| 092 | Screw, max throttle travel | - | - | |||
| 093 | Screw, low idle | - | - | |||
| 094 | Spring, low idle screw | - | - | |||
| 095 | Shaft asm, throttle | - | - | |||
| 096 | Nut, travel screw | - | - | |||
| 097 | Spacer, throttle shaft | - | - | |||
| 098 | Seal, throttle shaftB (350N) | B (350N) | 01 | 14067409 | - | - |
| 099 | Shaft asm, drive | - | - | |||
| 100 | Seal, drive shaft (blk)(*1) | - | - | |||
| 101 | Seal, drive shaft (red)(*1) | - | - | |||
| 102 | Housing, pump | - | - | |||
| 103 | Frame kit, w/arm, sol & shutdown coilB (350N) | B (350N) | 01 | 14067411 | - | - |
| 104 | Gasket, control cvr(*1) | - | - | |||
| 105 | Cover, f/inj gov contB (350N) W/CALIF, INT EGR | B (350N) W/CALIF, INT EGR | 01 | 14075393 | - | - |
| 105 | Cover, f/inj gov contB (350N) W/FED | B (350N) W/FED | 01 | 14075393 | - | - |
| 106 | Washer, term insulating | - | - | |||
| 107 | Washer, term contact | - | - | |||
| 108 | Nut, term contact | - | - | |||
| 109 | Washer, cvr lock screw | - | - | |||
| 110 | Strap, terminal ground | - | - | |||
| 111 | Connector, return line | - | - | |||
| 112 | Seal, connectorB (350N) | B (350N) | 01 | 15529636 | - | - |
| 113 | Seal, adv plungerB (350N) W/FED, CALIF | B (350N) W/FED, CALIF | 01 | 22530034 | - | - |
| 114 | Seal, inj pump to adapt o-ringB (350N) | B (350N) | 01 | 22504915 | - | - |
| 115 | Seal, housing press tapB (350N) | B (350N) | 01 | 15529632 | - | - |
| 115 | Seal, housing press tapB (350N) W/FED, CALIF | B (350N) W/FED, CALIF | 01 | 15529632 | - | - |
| 116 | Seal, hsg press tap | - | - | |||
| 117 | Screw, hsg press tap | - | - | |||
| 118 | Seal, piston hole plug (sm) | - | - | |||
| 119 | Seal, piston hole plug (lg) | - | - |
- To find out where to buy the item or analog, click on price.