Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 105.010 - LINING AND COVERING Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
ANTISQUEAK |
- | XXX XXX XXX XXXX | - | - | |
| ANTISQUEAK BITUMINOUS FELT CARDBOARD 5 MM THICK Replaced by: A 10 180 682 07 04 |
- | A 10 180 682 01 04 | - | - | |
| 001 | ANTISQUEAK FOR PEDAL FLOOR, LEFT BITUMINOUS FELT CARDBOARD 5 MM THICK |
001 | A 10 180 682 07 04 | - | - |
| ANTISQUEAK FOR PEDAL FLOOR, LEFT BITUMINOUS FELT CARDBOARD 5 MM THICK |
001 | A 10 180 682 09 04 | - | - | |
| REPLACED BY 180 682 01 04 BITUMINOUS FELT CARDBOARD 5 MM THICK Replaced by: A 180 682 01 04 |
- | A 10 180 682 02 04 | - | - | |
| ANTISQUEAK BITUMINOUS FELT CARDBOARD 5 MM THICK Replaced by: A 180 682 01 04 |
- | A 10 180 682 08 04 | - | - | |
| 002 | ANTISQUEAK FOR PEDAL FLOOR, RIGHT BITUMINOUS FELT CARDBOARD 5 MM THICK |
001 | A 18 068 201 04 | - | - |
| ANTISQUEAK FOR PEDAL FLOOR, RIGHT BITUMINOUS FELT CARDBOARD 5 MM THICK |
001 | A 18 068 202 04 | - | - | |
| ANTISQUEAK FOR PEDAL FLOOR, CENTER BITUMINOUS FELT CARDBOARD 5 MM THICK |
001 | A 10 180 682 06 04 | - | - | |
| ANTISQUEAK FOR DRIVER'S FLOOR, LEFT WAFFLE FELT, 10 MM THICK Replaced by: A 10 180 682 05 01 |
- | A 10 180 682 01 01 | - | - | |
| 003 | ANTISQUEAK FOR DRIVER'S FLOOR, LEFT WAFFLE FELT, 10 MM THICK |
001 | A 10 180 682 05 01 | - | - |
| ANTISQUEAK FOR DRIVER'S FLOOR, LEFT WAFFLE FELT, 10 MM THICK |
001 | A 10 180 682 07 01 | - | - | |
| ANTISQUEAK, SIDE MEMBER HALF FOR DRIVER'S FLOOR, LEFT AND RIGHT BITUMINOUS FELT CARDBOARD, 5 MM THICK Replaced by: A 10 180 682 02 13 |
- | A 10 180 682 00 13 | - | - | |
| 004 | ANTISQUEAK, SIDE MEMBER HALF FOR DRIVER'S FLOOR, LEFT AND RIGHT BITUMINOUS FELT CARDBOARD, 5 MM THICK |
002 | A 10 180 682 02 13 | - | - |
Replaced by: A 180 682 02 01 |
- | A 10 180 682 02 01 | - | - | |
| ANTISQUEAK FOR DRIVER'S FLOOR, RIGHT WAFFLE FELT, 10 MM THICK Replaced by: A 180 682 02 01 |
- | A 10 180 682 06 01 | - | - | |
| 04a | ANTISQUEAK FOR DRIVER'S FLOOR, RIGHT WAFFLE FELT, 10 MM THICK |
001 | A 18 068 202 01 | - | - |
| ANTISQUEAK FOR DRIVER'S FLOOR, RIGHT WAFFLE FELT, 10 MM THICK |
001 | A 18 068 204 01 | - | - | |
| 005 | ANTISQUEAK FOR DRIVER'S FLOOR, FRONT BITUMINOUS FELT CARDBOARD, 5 MM THICK |
002 | A 10 120 682 01 01 | - | - |
| 006 | ANTISQUEAK FOR DRIVER'S FLOOR, REAR BITUMINOUS FELT CARDBOARD, 5 MM THICK |
002 | A 10 120 682 02 01 | - | - |
| ANTISQUEAK BITUMINOUS FELT CARDBOARD, 5 MM THICK Replaced by: A 10 180 682 01 06 |
- | A 10 120 682 01 06 | - | - | |
| 007 | ANTISQUEAK FOR TRANSMISSION COVER PLATE, FRONT BITUMINOUS FELT CARDBOARD, 5 MM THICK |
001 | A 10 180 682 01 06 | - | - |
| ANTISQUEAK FOR TRANSMISSION COVER PLATE, FRONT Replaced by: A 10 180 682 01 13 |
- | A 10 120 682 02 13 | - | - | |
| 008 | ANTISQUEAK FOR TRANSMISSION COVER PLATE, FRONT WAFFLE FELT, 10 MM THICK |
001 | A 10 180 682 01 13 | - | - |
| ANTISQUEAK, CENTER TUNNEL BEHIND TRANSMISSION COVER BITUMINOUS FELT CARDBOARD, 5 MM THICK Replaced by: A 10 180 682 00 07 |
- | A 10 120 682 00 07 | - | - | |
| 010 | ANTISQUEAK, CENTER TUNNEL BEHIND TRANSMISSION COVER BITUMINOUS FELT CARDBOARD, 5 MM THICK |
001 | A 10 180 682 00 07 | - | - |
| 011 | ANTISQUEAK FOR TUNNEL, REAR BITUMINOUS FELT CARDBOARD, 5 MM THICK |
001 | A 10 120 682 00 05 | - | - |
| ANTISQUEAK FOR CORRUGATION IN MAIN FLOOR, REAR Replaced by: A 10 120 682 01 02 |
- | A 10 120 682 00 02 | - | - | |
| 012 | ANTISQUEAK FOR CORRUGATION IN MAIN FLOOR, REAR "ADROPLAST" HEAT UP TO 80DEGREES C DEGREES BEFORE MOUNTING |
006 | A 10 120 682 01 02 | - | - |
| 013 | ANTISQUEAK FOR REAR FLOOR BIT. FELT CARDBOARD, 3 MM THICK |
002 | A 10 120 682 00 08 | - | - |
| 014 | ANTISQUEAK UNDER REAR SEAT, RIGHT BITUMINOUS FELT CARDBOARD, 5 MM THICK |
001 | A 10 120 682 02 09 | - | - |
| 015 | ANTISQUEAK UNDER REAR SEAT, LEFT BITUMINOUS FELT CARDBOARD, 5 MM THICK |
001 | A 10 120 682 00 09 | - | - |
| 016 | ANTISQUEAK, CENTER TUNNEL UNDER REAR SEAT BITUMINOUS FELT CARDBOARD, 5 MM THICK |
002 | A 10 120 682 01 09 | - | - |
| ANTISQUEAK FOR SEAT FRAME, CENTER Replaced by: A 120 682 00 16 |
- | A 10 120 682 00 16 | - | - | |
| 017 | ANTISQUEAK FOR SEAT FRAME, CENTER "ADROPLAST" HEAT UP TO 80DEGREES C DEGREES BEFORE MOUNTING |
001 | A 12 068 200 16 | - | - |
| 020 | ANTISQUEAK FOR STIFFENING CORRUGATIONS IN LUGGAGE COMPARTMENT, REAR FROM CHASSIS 7507561 |
003 | A 10 120 682 00 41 | - | - |
| 022 | ANTISQUEAK FOR STIFFENING CORRUGATIONS IN LUGGAGE COMPARTMENT, REAR, LEFT FROM CHASSIS 7507561 |
001 | A 10 120 682 02 41 | - | - |
| 025 | ANTISQUEAK FOR INSTRUMENT PANEL, TOP, RIGHT |
001 | A 10 120 680 01 25 | - | - |
| ANTISQUEAK FOR INSTRUMENT PANEL, TOP, RIGHT |
001 | A 10 120 680 03 25 | - | - | |
| 026 | ANTISQUEAK FOR INSTRUMENT PANEL, TOP, LEFT |
001 | A 10 120 680 02 25 | - | - |
| ANTISQUEAK FOR INSTRUMENT PANEL, TOP, LEFT |
001 | A 10 120 680 04 25 | - | - | |
| ANTISQUEAK, LEFT FOR GLOVE BOX UP TO CHASSIS 7508071 |
001 | A 10 120 680 01 28 | - | - | |
| ANTISQUEAK, LEFT FOR GLOVE BOX UP TO CHASSIS 7508071 |
001 | A 10 120 680 04 28 | - | - | |
| ANTISQUEAK, RIGHT FOR GLOVE BOX UP TO CHASSIS 7508071 |
001 | A 10 120 680 02 28 | - | - | |
| ANTISQUEAK, RIGHT FOR GLOVE BOX UP TO CHASSIS 7508071 |
001 | A 10 120 680 03 28 | - | - | |
| 027 | ANTISQUEAK, LEFT FOR GLOVE BOX FROM CHASSIS 7508072 |
001 | A 10 120 680 11 28 | - | - |
| ANTISQUEAK, LEFT FOR GLOVE BOX FROM CHASSIS 7508072 |
001 | A 10 120 680 14 28 | - | - | |
| 028 | ANTISQUEAK, RIGHT FOR GLOVE BOX FROM CHASSIS 7508072 |
001 | A 10 120 680 13 28 | - | - |
| ANTISQUEAK, RIGHT FOR GLOVE BOX FROM CHASSIS 7508072 |
001 | A 10 120 680 12 28 | - | - | |
| REPLACED BY 120 680 01 25 TOGETHER WITH 1 ANTISQUEAK 120 680 02 25 |
- | A 10 180 680 03 25 | - | - | |
| 029 | ANTISQUEAK, LEFT AT FRONT WALL, UPPER PART, UNDER INSTRUMENT PANEL SIMPLICITY OF SPARE PARTS |
001 | A 12 068 001 25 | - | - |
| 29a | ANTISQUEAK, RIGHT AT FRONT WALL, UPPER PART, UNDER INSTRUMENT PANEL SIMPLICITY OF SPARE PARTS |
001 | A 12 068 002 25 | - | - |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 3,5 X 19 DIN 7983 VERCHROMT FOR ANTISQUEAK AT FRONT WALL, UPPER PART |
001 | - | - | ||
| COUNTERSUNK SHEET METAL WASHER FOR ANTISQUEAK AT FRONT WALL, UPPER PART |
001 | A 00 098 512 62 | - | - | |
| REPLACED BY 120 680 03 25 TOGETHER WITH 1 ANTISQUEAK 120 680 04 25 |
- | A 10 180 680 05 25 | - | - | |
| ANTISQUEAK, LEFT AT FRONT WALL, UPPER PART, UNDER INSTRUMENT PANEL SIMPLICITY OF SPARE PARTS |
001 | A 12 068 003 25 | - | - | |
| ANTISQUEAK, RIGHT AT FRONT WALL, UPPER PART, UNDER INSTRUMENT PANEL SIMPLICITY OF SPARE PARTS |
001 | A 12 068 004 25 | - | - | |
| ANTISQUEAK, BODY FRONT END, LEFT IN ENGINE SPACE Replaced by: A 10 120 680 19 29 |
- | A 10 120 680 05 29 | - | - | |
| 030 | ANTISQUEAK, BODY FRONT END, LEFT IN ENGINE SPACE |
001 | A 10 120 680 19 29 | - | - |
| ANTISQUEAK, BODY FRONT END, LEFT IN ENGINE SPACE |
001 | A 10 180 680 24 29 | - | - | |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 3,5X22 DIN 7983 VERCHROMT FOR ANTISQUEAK AT BODY FRONT END, LEFT |
001 | - | - | ||
| COUNTERSUNK SHEET METAL WASHER FOR ANTISQUEAK AT BODY FRONT END, LEFT |
001 | A 00 098 512 62 | - | - | |
| ANTISQUEAK, BODY FRONT END RIGHT IN ENGINE SPACE Replaced by: A 10 180 680 23 29 |
- | A 10 180 680 14 24 | - | - | |
| 031 | ANTISQUEAK, BODY FRONT END RIGHT IN ENGINE SPACE |
001 | A 10 180 680 23 29 | - | - |
| ANTISQUEAK, BODY FRONT END, RIGHT IN ENGINE SPACE |
001 | A 10 120 680 18 29 | - | - | |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 3,5X22 DIN 7983 VERCHROMT FOR ANTISQUEAK AT BODY FRONT END, RIGHT |
002 | - | - | ||
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 3,5X16 DIN 7983 VERCHROMT FOR ANTISQUEAK AT BODY FRONT END, RIGHT |
003 | - | - | ||
| COUNTERSUNK SHEET METAL WASHER FOR ANTISQUEAK AT BODY FRONT END, RIGHT |
005 | A 00 098 512 62 | - | - | |
| ANTISQUEAK, BODY FRONT END, CENTER, TOP IN ENGINE SPACE Replaced by: A 10 120 680 14 29 |
- | A 10 120 680 06 29 | - | - | |
| 032 | ANTISQUEAK, BODY FRONT END, CENTER, TOP IN ENGINE SPACE |
001 | A 10 120 680 14 29 | - | - |
| ANTISQUEAK, BODY FRONT END, CENTER, TOP IN ENGINE SPACE |
001 | A 10 120 680 15 29 | - | - | |
| ANTISQUEAK, BODY FRONT END, CENTER, BOTTOM IN ENGINE SPACE Replaced by: A 10 180 680 21 29 |
- | A 10 180 680 09 29 | - | - | |
| 033 | ANTISQUEAK, BODY FRONT END, CENTER, BOTTOM IN ENGINE SPACE |
001 | A 10 180 680 21 29 | - | - |
| ANTISQUEAK, BODY FRONT END, CENTER, BOTTOM IN ENGINE SPACE |
001 | A 10 180 680 22 29 | - | - | |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 3,5X22 DIN 7983 VERCHROMT FOR ANTISQUEAK AT BODY FRONT END, CENTER TOP AND CENTER BOTTOM |
005 | - | - | ||
| COUNTERSUNK SHEET METAL WASHER FOR ANTISQUEAK AT BODY FRONT END, CENTER TOP AND CENTER BOTTOM |
005 | A 00 098 512 62 | - | - | |
| REPLACED BY 10 120 682 01 10 TOGETHER WITH 2 ANTISQUEAK 10 120 682 02 10 |
- | A 10 180 682 01 10 | - | - | |
| 040 | ANTISQUEAK, CENTER FOR INTERMEDIATE WALL BEHIND REAR SEAT |
001 | A 10 120 682 01 10 | - | - |
| 041 | ANTISQUEAK, LATERAL JUTE FELT, 4 MM THICK |
002 | A 10 120 682 02 10 | - | - |
| 042 | ANTISQUEAK, ROOF JUTE FELT WITH PAPER FILLER |
NB | A 10 120 682 00 51 | - | - |
COVERING |
- | XXX XXX XXX XXXX | - | - | |
| DRIVER'S FLOOR, LEFT Replaced by: A 10 180 680 03 08 |
- | A 10 180 680 01 08 | - | - | |
| 001 | DRIVER'S FLOOR, LEFT | 001 | A 10 180 680 03 08 | - | - |
| DRIVER'S FLOOR, RIGHT Replaced by: A 10 180 680 04 08 |
- | A 10 180 680 02 08 | - | - | |
| 002 | DRIVER'S FLOOR, RIGHT | 001 | A 10 180 680 04 08 | - | - |
| 003 | COUNTERSUNK SHEET METAL WASHER FOR DRIVER'S FLOOR AT BODY FLOOR |
004 | A 00 099 017 42 | - | $0.12 |
| COUNTERSUNK SHEET METAL SCREW B 5,5X22 DIN 7982 FOR DRIVER'S FLOOR AT BODY FLOOR |
004 | - | - | ||
| 004 | BUTTON FOR DRIVER'S FLOOR AT BODY FLOOR |
004 | A 00 098 822 80 | - | - |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 4,2X32 DIN 7983 FOR DRIVER'S FLOOR AT BODY FLOOR |
004 | - | - | ||
| 005 | COVER FOR ELECTRIC TRANSMITTER IN REAR COMPARTMENT FLOOR |
- | A 13 698 402 52 | - | - |
| 005 | COVER FOR OIL FILLING, AUTOM. CLUTCH IN TRANSMISSION COVER PLATE FROM CHASSIS 7504313 |
001 | A 13 698 402 52 | - | - |
| RUBBER BUFFER FOR LOCKING OF DRAIN HOLES AT SIDE MEMBER HALF AND CROSS MEMBER BOTTOM |
007 | A 00 098 796 40 | - | - | |
| RUBBER BUFFER FOR LOCKING OF DRAIN HOLES AT FLOOR REAR AND FORK MEMBER FRONT, BOTTOM |
003 | A 00 098 792 40 | - | $0.08 | |
| RUBBER MAT COVERING FOR TUNNEL, FRONT STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 |
001 | A 10 120 684 02 13 | - | - | |
| RUBBER MAT COVERING FOR TUNNEL, FRONT STATE COLOUR WHEN ORDERING FROM CHASSIS 6500943-7504312 |
001 | A 10 120 684 04 13 | - | - | |
| 010 | RUBBER MAT COVERING FOR TUNNEL, FRONT STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313 |
001 | A 10 120 684 05 13 | - | - |
| RUBBER MAT, LEFT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 |
001 | A 10 180 684 01 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 |
001 | A 10 180 684 02 02 | - | - | |
| RUBBER MAT, LEFT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING UP TO CHASSIS 6502735 |
001 | A 10 180 684 03 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING UP TO CHASSIS 6502735 |
001 | A 10 180 684 04 02 | - | - | |
| RUBBER MAT, LEFT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 6500943-7504312 |
001 | A 10 180 684 05 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 6500943-7504312 |
001 | A 10 180 684 07 02 | - | - | |
| RUBBER MAT, LEFT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 6502736-7504312 |
001 | A 10 180 684 06 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 6502736-7504312 |
001 | A 10 180 684 08 02 | - | - | |
| 011 | RUBBER MAT, LEFT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313 |
001 | A 10 180 684 09 02 | - | - |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313-8504274 |
001 | A 10 180 684 10 02 | - | - | |
| 012 | RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 8504275 |
001 | A 10 180 684 13 02 | - | - |
| RUBBER MAT, LEFT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313 |
001 | A 10 180 684 11 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313-8504274 |
001 | A 10 180 684 12 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 8504275 |
001 | A 10 180 684 14 02 | - | - | |
| RUBBER MAT, LEFT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING |
001 | A 18 068 401 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S SEAT FLOOR STATE COLOUR WHEN ORDERING |
001 | A 18 068 402 02 | - | - | |
| 013 | BUTTON FOR RUBBER MAT AT PEDAL FLOOR |
003 | A 00 098 823 80 | - | - |
| SHEET METAL SCREW B 4,2X32 DIN 7983 FOR RUBBER MAT AT PEDAL FLOOR |
003 | - | - | ||
Replaced by: A 10 120 684 02 06 |
- | A 10 120 684 00 06 | - | - | |
| LINING RUBBER MAT FOR CENTER TUNNEL BETWEEN DRIVER'S SEAT STATE COLOUR WHEN ORDERING Replaced by: A 10 120 684 02 06 |
- | A 10 120 684 01 06 | - | - | |
| 014 | LINING RUBBER MAT FOR CENTER TUNNEL BETWEEN DRIVER'S SEAT STATE COLOUR WHEN ORDERING |
001 | A 10 120 684 02 06 | - | - |
| RUBBER MAT FOR REAR FLOOR STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 |
001 | A 10 120 684 00 14 | - | - | |
| RUBBER MAT FOR REAR FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 6500943 - 7504312 |
001 | A 10 120 684 01 14 | - | - | |
| 015 | RUBBER MAT FOR REAR FLOOR STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313 |
001 | A 10 120 684 02 14 | - | - |
| 016 | BUTTON FOR RUBBER MAT AT FLOOR |
004 | A 00 098 822 80 | - | - |
| SHEET METAL SCREW B 4,2X19 DIN 7983 FOR RUBBER MAT AT FLOOR |
004 | - | - | ||
| COVERING FOR SPARE WHEEL RECESS Replaced by: A 10 120 680 01 09 |
- | A 10 120 680 00 09 | - | - | |
| 020 | COVERING FOR SPARE WHEEL RECESS |
001 | A 10 120 680 01 09 | - | - |
| RUBBER MAT IN LUGGAGE COMPARTMENT, LEFT UP TO CHASSIS 8508424 |
001 | A 10 120 684 01 05 | - | - | |
| RUBBER MAT IN LUGGAGE COMPARTMENT, RIGHT EXPORT, SPECIAL REQUEST, FOR TIRES 6.40-15 UP TO CHASSIS 8508424 |
001 | A 10 120 684 02 05 | - | - | |
| 021 | RUBBER MAT, GREY IN LUGGAGE COMPARTMENT, LEFT FROM CHASSIS 8508425 |
001 | A 12 068 401 05 | - | - |
| RUBBER MAT, GREY IN LUGGAGE COMPARTMENT, RIGHT EXPORT, SPECIAL REQUEST, FOR TIRES 6.40-15 FROM CHASSIS 8508425 |
001 | A 12 068 402 05 | - | - | |
| RUBBER MAT IN LUGGAGE COMPARTMENT, CENTER PIECE UP TO CHASSIS 8508424 |
001 | A 10 120 684 01 04 | - | - | |
| 023 | RUBBER MAT, GREY IN LUGGAGE COMPARTMENT, CENTER PIECE FROM CHASSIS 8508425 |
001 | A 12 068 400 04 | - | - |
| BUTTON FOR RUBBER MAT AT REAR FLOOR UP TO CHASSIS 8506630 TO BORE FIXING HOLE AT FLOOR UP TO 7.5 MM Replaced by: A 000 988 17 80 |
- | A 00 098 822 80 | - | - | |
| 024 | BUTTON FOR RUBBER MAT AT REAR FLOOR UP TO CHASSIS 8506630 TO BORE FIXING HOLE AT FLOOR UP TO 7.5 MM |
006 | A 00 098 817 80 | - | $15.51 |
| LINING, LEFT FOR ENTRANCE STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 Replaced by: A 10 120 686 05 80 |
- | A 10 120 686 03 80 | - | - | |
| LINING, LEFT FOR ENTRANCE STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 |
001 | A 10 120 686 05 80 | - | - | |
| LINING, RIGHT FOR ENTRANCE STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 Replaced by: A 10 120 686 06 80 |
- | A 10 120 686 04 80 | - | - | |
| LINING, RIGHT FOR ENTRANCE STATE COLOUR WHEN ORDERING UP TO CHASSIS 6500942 |
001 | A 10 120 686 06 80 | - | - | |
| ENTRANCE RAIL, LEFT FOR DRIVER'S DOOR UP TO CHASSIS 6500579 |
001 | A 10 120 686 01 20 | - | - | |
| ENTRANCE RAIL, RIGHT FOR DRIVER'S DOOR UP TO CHASSIS 6500579 |
001 | A 10 120 686 02 20 | - | - | |
| COUNTERSUNK SHEET METAL SCREW B 3,5X9,5 DIN 7982 VERCHROMT FOR ENTRANCE RAIL AT ENTRANCE SILL UP TO CHASSIS 6500579 |
012 | - | - | ||
| ENTRANCE RAIL, LEFT FOR REAR DOOR UP TO CHASSIS 6500579 |
001 | A 10 120 686 01 22 | - | - | |
| ENTRANCE RAIL, RIGHT FOR REAR DOOR UP TO CHASSIS 6500579 |
001 | A 10 120 686 02 22 | - | - | |
| COUNTERSUNK SHEET METAL SCREW B 3,5X9,5 DIN 7982 VERCHROMT FOR ENTRANCE RAIL AT ENTRANCE SILL UP TO CHASSIS 6500579 |
008 | - | - | ||
| COUNTERSUNK SHEET METAL SCREW B 3,5X13 DIN 7982 VERCHROMT FOR ENTRANCE RAIL AT ENTRANCE SILL UP TO CHASSIS 6500579 |
002 | - | - | ||
| LINING, LEFT FOR ENTRANCE STATE COLOUR WHEN ORDERING FROM CHASSIS 6500943-7504312 |
001 | A 10 120 686 07 80 | - | - | |
| LINING, RIGHT FOR ENTRANCE STATE COLOUR WHEN ORDERING FROM CHASSIS 6500943-7504312 |
001 | A 10 120 686 08 80 | - | - | |
| 025 | LINING, LEFT FOR ENTRANCE STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313 |
001 | A 10 120 686 09 80 | - | - |
| 026 | LINING, RIGHT FOR ENTRANCE STATE COLOUR WHEN ORDERING FROM CHASSIS 7504313 |
001 | A 10 120 686 10 80 | - | - |
| 031 | CUP FOR PEDAL SEALING |
002 | A 10 186 687 00 37 | - | - |
| LENS-HD. SHEET METAL SCREW BZ 3,5X6,5 DIN 7981 FOR CUP AT FRONT WALL |
006 | - | - | ||
| BUFFER BUTTON FOR LOCKING HOLES |
002 | A 00 098 730 40 | - | - | |
| LOCKING PLATE FOR LOCKING MOUNTING HOLES AT WHEEL ARCH UP TO CHASSIS 7504312 |
002 | A 00 098 701 44 | - | - | |
| 032 | RUBBER BUFFER FOR LOCKING HOLES IN COVER PLATE OF GLOVE BOX |
004 | A 00 098 718 40 | - | $0.81 |
| LOCKING PLATE FOR LOCKING HOLES IN COVER PLATE OF GLOVE BOX |
001 | A 00 098 702 44 | - | $2.27 | |
| 033 | LOCKING PLATE FOR SEALING IDLING CABLE AND STARTER CABLE OR TRIP RESET RESP. |
003 | A 00 098 703 44 | - | $2.27 |
| 034 | RUBBER PLUG FOR LOCKING HOLES NOT USED FOR MOUNTING ACCELERATOR PEDAL, CONTROL SHAFT |
002 | A 00 098 704 15 | - | $5.37 |
| 034 | RUBBER PLUG FOR LOCKING PASSAGES AT WHEEL ARCH, LEFT |
010 | A 00 098 704 15 | - | $5.37 |
| 036 | RUBBER BUTTON FOR CLOCK FOR LOCKING HOLE IN COVER PLATE OF GLOVE BOX |
001 | A 00 098 730 40 | - | - |
| 037 | LOCKING PLATE FOR LOCKING PASSAGE OF OPERATION ROD FOR FUEL REVERSING COCK |
001 | A 00 098 717 44 | - | $5.35 |
| 038 | LOCKING PLATE FOR LOCKING PASSAGE AT WHEEL ARCH, TOP, LEFT |
002 | A 00 098 719 44 | - | - |
| 040 | PARTITION WALL, LEFT IN ENGINE SPACE |
001 | A 10 180 680 01 76 | - | - |
| PARTITION WALL, LEFT IN ENGINE SPACE |
001 | A 10 180 680 03 76 | - | - | |
Replaced by: A 000 983 01 98 |
- | A 10 180 687 01 70 | - | - | |
| ANTISQUEAK AT PARTITION WALL, LEFT MOLTOPREN Replaced by: A 000 983 01 98 |
- | A 10 180 687 02 70 | - | - | |
| ANTISQUEAK AT PARTITION WALL, LEFT MOLTOPREN STATE MEASURING WHEN ORDERING |
NB | A 00 098 301 98 | - | - | |
| LOCKING PLATE AT BRACKET PARTITION WALL FOR ATE BOOSTER BRAKE |
001 | A 00 098 704 44 | - | - | |
| 045 | PARTITION WALL, RIGHT IN ENGINE SPACE |
001 | A 10 180 680 02 76 | - | - |
| 046 | PARTITION WALL, RIGHT BRACKET IN ENGINE SPACE |
001 | A 10 121 680 05 56 | - | - |
| BRACKET UP TO CHASSIS 8506199 BRACKET 10 180 687 00 16 HAS TO BE USED AND TO BE SCREWED TO PART 120 680 00 56. BORE PASSAGE HOLE TO Replaced by: A 128 680 00 56 |
- | A 10 180 680 01 56 | - | - | |
| 047 | BRACKET UP TO CHASSIS 8506199 BRACKET 10 180 687 00 16 HAS TO BE USED AND TO BE SCREWED TO PART 120 680 00 56. BORE PASSAGE HOLE TO |
001 | A 12 868 000 56 | - | - |
| BRACKET IN ENGINE SPACE SPECIAL REQUEST ATE BOOSTER BRAKE |
001 | A 10 121 680 07 56 | - | - | |
Replaced by: A 000 983 01 98 |
- | A 10 121 687 02 70 | - | - | |
Replaced by: A 000 983 01 98 |
- | A 10 180 687 02 70 | - | - | |
Replaced by: A 000 983 01 98 |
- | A 10 180 687 05 70 | - | - | |
Replaced by: A 000 983 01 98 |
- | A 10 180 687 06 70 | - | - | |
Replaced by: A 000 983 01 98 |
- | A 10 180 687 07 70 | - | - | |
| ANTISQUEAK MOLTOPREN Replaced by: A 000 983 01 98 |
- | A 10 180 687 08 70 | - | - | |
| ANTISQUEAK MOLTOPREN STATE MEASURING WHEN ORDERING |
- | A 00 098 301 98 | - | - | |
| AT PARTITION WALL, RIGHT | 001 | A 00 098 301 98 | - | - | |
| AT BRACKET FOR PARTITION WALL, RIGHT |
002 | A 00 098 301 98 | - | - | |
| AT PARTITION WALL PLATE | 001 | A 00 098 301 98 | - | - | |
| AT BRACKET | 001 | A 00 098 301 98 | - | - | |
| SEALING FOR BRACKET PARTITION WALL Replaced by: A 000 983 01 98 |
- | A 10 180 687 09 70 | - | - | |
| SEALING FOR BRACKET PARTITION WALL STATE MEASURING WHEN ORDERING |
001 | A 00 098 301 98 | - | - | |
| 054 | ANGLE | 001 | A 10 180 687 00 12 | - | - |
| LENS-HD. SCREW AM 5X12 DIN 7985-4S FOR ANGLE AT PARTITION WALL, LEFT, OR FOR PARTITION WALL AT ANGLE AIR DUCT RESP. |
003 | - | - | ||
| WASHER 5,3 DIN 433 FOR ANGLE AT PARTITION WALL, LEFT, OR FOR PARTITION WALL AT ANGLE AIR DUCT RESP. |
003 | - | - | ||
| SPRING WASHER A 5 DIN 137 FOR ANGLE AT PARTITION WALL, LEFT, OR FOR PARTITION WALL AT ANGLE AIR DUCT RESP. |
003 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR ANGLE AT PARTITION WALL, LEFT, OR FOR PARTITION WALL AT ANGLE AIR DUCT RESP. |
003 | - | - | ||
| LENS-HD. SCREW AM 4X10 DIN 7985-4S FOR PARTITION WALL AT AIR DUCT |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR PARTITION WALL AT AIR DUCT |
001 | - | - | ||
| WASHER A 4,3 DIN 9021 FOR PARTITION WALL AT AIR DUCT |
001 | - | - | ||
| 056 | TENSION SPRING FOR PARTITION WALL AT FRONT WALL |
001 | A 12 099 316 10 | - | - |
| BRACKET UP TO CHASSIS 8506199 BRACKET 10 180 687 00 16 HAS TO BE USED AND TO BE SCREWED TO PART 121 680 02 56. BORE PASSAGE HOLE TO Replaced by: A 121 680 02 56 |
- | A 10 121 680 01 56 | - | - | |
| 057 | BRACKET UP TO CHASSIS 8506199 BRACKET 10 180 687 00 16 HAS TO BE USED AND TO BE SCREWED TO PART 121 680 02 56. BORE PASSAGE HOLE TO |
001 | A 12 168 002 56 | - | - |
| BRACKET SPECIAL REQUEST, ATE BOOSTER BRAKE |
001 | A 10 120 680 00 56 | - | - | |
Replaced by: A 000 983 01 98 |
- | A 10 180 687 00 70 | - | - | |
| ANTISQUEAK AT BRACKET, PARTITION WALL, CENTER MOLTOPREN Replaced by: A 000 983 01 98 |
- | A 10 121 687 01 70 | - | - | |
| ANTISQUEAK AT BRACKET, PARTITION WALL, CENTER MOLTOPREN STATE MEASURING WHEN ORDERING |
NB | A 00 098 301 98 | - | - | |
| RUBBER MOULDING 40-MM LONG ORDER BY THE METER |
001 | A 00 098 710 36 | - | $4.94 | |
| RUBBER MOULDING 250-MM LONG ORDER BY THE METER |
001 | A 00 098 710 36 | - | $4.94 | |
| LENS-HD. SCREW AM 6X15 DIN 7985-4S FOR BRACKET AT FRONT WALL |
004 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET AT FRONT WALL |
004 | - | - | ||
| 065 | BRACKET FOR FUSE BOX |
001 | A 10 180 680 01 58 | - | - |
| ANTISQUEAK FOR BRACKET AT FUSE BOX MOLTOPREN Replaced by: A 000 983 01 98 |
- | A 10 180 687 03 70 | - | - | |
| ANTISQUEAK FOR BRACKET AT FUSE BOX MOLTOPREN STATE MEASURING WHEN ORDERING |
001 | A 00 098 301 98 | - | - | |
| RUBBER MOULDING 230-MM LONG ORDER BY THE METER |
001 | A 00 098 710 36 | - | $4.94 | |
| LENS-HD. SHEET METAL SCREW BZ 4,2X19 DIN 7981 FOR BRACKET, FUSE BOX AT BRACKET ATE BOOSTER BRAKE |
002 | - | - | ||
| SEALING MOLTOPREN FOR BRACKET, ATE BOOSTER BRAKE AT PARTITION WALL, CENTER Replaced by: A 000 983 01 98 |
- | A 10 180 687 04 70 | - | - | |
| SEALING MOLTOPREN FOR BRACKET, ATE BOOSTER BRAKE AT PARTITION WALL, CENTER ORDER BY THE METER |
001 | A 00 098 301 98 | - | - | |
| 069 | SEALING AT WHEEL ARCH PAN |
002 | A 10 180 687 01 97 | - | - |
| COVERING FRONT WALL Replaced by: A 000 983 49 86 |
- | A 00 098 341 86 | - | - | |
| COVERING FRONT WALL PLASTIC FOIL WITH MOLTOPREN STATE COLOUR AND MEASURING WHEN ORDERING |
- | A 00 098 349 86 | - | - | |
| FOR INSTRUMENT PANEL, BOTTOM, RIGHT AND BOTTOM, LEFT PLASTIC FOIL WITH MOLTOPREN STATE COLOUR AND MEASURING WHEN ORDERING |
002 | A 00 098 349 86 | - | - | |
| FOR INSTRUMENT PANEL, TOP, RIGHT AND TOP, LEFT PLASTIC FOIL WITH MOLTOPREN STATE COLOUR AND MEASURING WHEN ORDERING |
002 | A 00 098 349 86 | - | - | |
| FOR INSTRUMENT PANEL, OVER AND UNDER COMBI-INSTRUMENT PLASTIC FOIL WITH MOLTOPREN STATE COLOUR AND MEASURING WHEN ORDERING |
002 | A 00 098 349 86 | - | - | |
| FOR INSTRUMENT PANEL, CENTER COMBI-INSTRUMENT PLASTIC FOIL WITH MOLTOPREN STATE COLOUR AND MEASURING WHEN ORDERING |
001 | A 00 098 349 86 | - | - | |
| 070 | COVERING, LEFT FOR FRONT WALL, LATERAL, BOTTOM STATE COLOUR WHEN ORDERING |
001 | A 10 120 688 07 06 | - | - |
| 071 | COVERING, RIGHT FOR FRONT WALL, LATERAL, BOTTOM STATE COLOUR WHEN ORDERING |
001 | A 10 120 688 08 06 | - | - |
| 072 | FIXING RAIL, FRONT, BOTTOM, LEFT FOR FRONT WALL COVERING STATE COLOUR WHEN ORDERING |
001 | A 10 120 688 01 20 | - | - |
| 073 | FIXING RAIL, FRONT, BOTTOM, RIGHT FOR FRONT WALL COVERING STATE COLOUR WHEN ORDERING |
001 | A 10 120 688 02 20 | - | - |
| COUNTERSUNK SHEET METAL SCREW B 3,9X13 DIN 7982 VERCHROMT FOR FIXING RAIL AT FRONT WALL, LATERAL |
007 | - | - | ||
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 3,9X9,5 DIN 7983 VERCHROMT FOR FIXING RAIL AT FRONT WALL, LATERAL |
001 | - | - | ||
| COVERING FOR INSTRUMENT PANEL, LATERAL, LEFT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION Replaced by: A 10 120 680 21 83 |
- | A 10 120 689 05 85 | - | - | |
| 074 | COVERING FOR INSTRUMENT PANEL, LATERAL, LEFT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION |
001 | A 10 120 680 21 83 | - | - |
| COVERING FOR INSTRUMENT PANEL, LATERAL, LEFT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION Replaced by: A 10 120 680 18 83 |
- | A 10 120 689 17 83 | - | - | |
| COVERING FOR INSTRUMENT PANEL, LATERAL, LEFT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION |
001 | A 10 120 680 18 83 | - | - | |
| COVERING FOR INSTRUMENT PANEL, LETARAL, RIGHT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION Replaced by: A 10 120 680 22 83 |
- | A 10 120 689 06 85 | - | - | |
| 075 | COVERING FOR INSTRUMENT PANEL, LETARAL, RIGHT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION |
001 | A 10 120 680 22 83 | - | - |
| COVERING FOR INSTRUMENT PANEL, LETARAL, RIGHT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION Replaced by: A 10 120 680 23 83 |
- | A 10 120 689 09 85 | - | - | |
| COVERING FOR INSTRUMENT PANEL, LETARAL, RIGHT OPENING FOR OPERATION LEVER FOR HEATING AND VENTILATION |
001 | A 10 120 680 23 83 | - | - | |
| 076 | CLIP NUT OPTIONAL FOR COVERING AT PARTITION WALL, OUTSIDE |
004 | A 00 099 404 45 | - | - |
| CLIP NUT OPTIONAL FOR COVERING AT PARTITION WALL, OUTSIDE |
004 | A 00 099 416 45 | - | - | |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW BZ 4,2X13 DIN 7983 FOR COVERING AT PARTITION WALL, OUTSIDE |
004 | - | - | ||
| CLAMP FOR COVERING AT ANGULAR PLATE UP TO CHASSIS 7502837 |
002 | A 00 098 877 78 | - | $0.42 | |
| PIN FOR COVERING AT ANGULAR PLATE UP TO CHASSIS 7502837 |
002 | A 12 099 102 07 | - | - | |
| COVER WITHOUT HINGE FOR GLOVE BOX Replaced by: A 120 680 01 83 |
- | A 10 120 680 04 83 | - | - | |
| 080 | COVER WITHOUT HINGE FOR GLOVE BOX |
001 | A 12 068 001 83 | - | - |
| 081 | HANDLE | 001 | A 10 120 689 00 70 | - | - |
| COUNTERSUNK SCREW AM 3X8 DIN 7987-4 S FOR HANDLE AT COVER |
003 | - | - | ||
| 082 | SPRING-BALL LOCK | 001 | A 10 120 680 01 84 | - | - |
| 083 | GLOVE BOX HINGE, LEFT | 001 | A 10 120 680 03 87 | - | - |
| 084 | GLOVE BOX HINGE, RIGHT | 001 | A 10 120 680 04 87 | - | - |
| COUNTERSUNK SCREW AM 4X6 DIN 7987-4 S FOR HINGE AT COVER |
004 | - | - | ||
| 085 | COVER FOR GLOVE BOX |
001 | A 10 120 680 05 98 | - | - |
| 087 | HANDLE | 001 | A 12 136 699 01 70 | - | - |
| LENS-HD. COUNTERSUNK SCREW AM 4X15 DIN 7988-4S VERCHROMT FOR HANDLE AT COVER |
002 | - | - | ||
| COUNTERSUNK WASHER FOR HANDLE AT COVER |
002 | A 00 098 510 62 | - | $0.47 | |
| 088 | GLOVE BOX HINGE, LEFT | 001 | A 10 120 680 05 87 | - | - |
| 089 | GLOVE BOX HINGE, RIGHT | 001 | A 10 120 680 06 87 | - | - |
| COUNTERSUNK WOOD SCREW 3,5X13 DIN 7997 FOR HINGE AT COVER |
004 | - | - | ||
| 090 | CLIP NUT OPTIONAL FOR GLOVE BOX COVER AT INSTRUMENT PANEL |
004 | A 00 099 404 45 | - | - |
| CLIP NUT OPTIONAL FOR GLOVE BOX COVER AT INSTRUMENT PANEL |
004 | A 00 099 416 45 | - | - | |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 4,2X13 DIN 7983 FOR GLOVE BOX COVER AT INSTRUMENT PANEL |
004 | - | - | ||
| 091 | GUIDE FORK FOR GLOVE BOX COVER AT INSTRUMENT PANEL |
002 | A 10 186 689 00 33 | - | - |
| 092 | PRESSURE SPRING FOR GLOVE BOX COVER AT INSTRUMENT PANEL |
001 | A 18 699 320 01 | - | $11.11 |
| 093 | SUPPORT FOR GLOVE BOX COVER |
001 | A 10 120 689 00 41 | - | - |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 2,9X6,5 DIN 7983 VERCHROMT FOR SUPPORT AT COVER PLATE OF GLOVE BOX |
001 | - | - | ||
| LENS-HD. SHEET METAL SCREW BZ 2,9X6,5 DIN 7981 FOR SUPPORT AT COVER PLATE OF GLOVE BOX |
002 | - | - | ||
| COVER FOR INSTRUMENT PANEL, CENTER Replaced by: A 10 120 689 02 39 |
- | A 10 105 680 00 96 | - | - | |
| 095 | COVER FOR INSTRUMENT PANEL, CENTER |
001 | A 10 120 689 02 39 | - | - |
| 096 | TYPE DESIGNATION PLATE, INSIDE AT INSTRUMENT PANEL |
001 | A 10 105 817 00 14 | - | - |
| 097 | CLAMP FOR TYPE DESIGNATION PLATE AT COVER |
002 | A 00 099 400 45 | - | - |
| CLIP NUT OPTIONAL FOR CENTER COVER AT PARTITION WALL |
004 | A 00 099 404 45 | - | - | |
| CLIP NUT OPTIONAL FOR CENTER COVER AT PARTITION WALL |
004 | A 00 099 416 45 | - | - | |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW BZ 4,2X13 DIN 7983 FOR CENTER COVER AT PARTITION WALL |
003 | - | - | ||
| COUNTERSUNK SHEET METAL SCREW BZ 4,2X13 DIN 7982 FOR CENTER COVER AT PARTITION WALL |
001 | - | - | ||
| 098 | FIXING PLATE FOR OPERATION BUTTONS |
001 | A 10 120 680 03 11 | - | - |
| FIXING PLATE FOR OPERATION BUTTONS |
001 | A 10 121 680 00 11 | - | - | |
| 099 | WASHER FOR CHARGING PILOT LAMP |
001 | A 10 120 689 00 24 | - | - |
| LENS-HD. SHEET METAL SCREW B 3,9X16 DIN 7981 FOR FIXING PLATE AT COVER PLATE |
003 | - | - | ||
| WASHER A 4,3 DIN 9021 FOR FIXING PLATE AT COVER PLATE |
003 | - | - | ||
| SHIM FOR FIXING PLATE AT COVER PLATE |
003 | A 00 098 411 55 | - | - | |
| CLIP NUT FOR FIXING PLATE AT COVER PLATE |
003 | A 00 099 413 45 | - | $0.67 | |
| 110 | COVER PLATE FOR INSTRUMENT PANEL STATE COLOUR WHEN ORDERING |
001 | A 10 105 680 00 75 | - | - |
| COUNTERSUNK SHEET METAL WASHER FOR COVER PLATE AT COVER PLATE OF GLOVE BOX |
002 | A 00 098 509 62 | - | $0.47 | |
| LENS-HD. COUNTERSUNK SHEET METAL SCREW B 2,9X9,5 DIN 7983 VERCHROMT FOR COVER PLATE AT COVER PLATE OF GLOVE BOX |
002 | - | - | ||
| 111 | ORNAMENTAL BAR FOR INSTRUMENT PANEL |
001 | A 10 120 689 01 71 | - | - |
| 112 | CLIP FOR ORNAMENTAL BAR AT INSTRUMENT PANEL |
006 | A 00 098 858 78 | - | - |
| 113 | SPREADER CLIP FOR ORNAMENTAL BAR AT INSTRUMENT PANEL |
004 | A 00 098 847 78 | - | - |
| 115 | COVER PLATE ABOVE COMPENSATOR IN LUGGAGE ROOM |
001 | A 10 120 690 00 22 | - | - |
| RUBBER MOULDING, 30-MM LONG ORDER BY THE METER |
NB | A 00 098 710 36 | - | $4.94 | |
| LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR COVER PLATE AT BODY REAR END |
002 | - | - | ||
| RUBBER BUFFER FOR LOCKING OF DISCHARGING HOLE IN COVER PLATE, LUGGAGE COMPARTMENT FROM CHASSIS 9503030-9503980 |
001 | A 00 098 792 40 | - | $0.08 |
- To find out where to buy the item or equivalent, click on the part number.