Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 105.011 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
BATTERY, STARTER CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 001 | LEAD BATTERY 12 V 56 AH | 001 | A 00 054 146 01 | - | - |
| LEAD BATTERY 12 V 56 AH TROPICAL DESIGN |
001 | A 00 054 112 01 | - | - | |
| SPECIAL COLD START BATTERY FOR REGIONS WITH COLD TEMPERATURES |
001 | A 00 054 158 01 | - | - | |
| FIXING FRAME Replaced by: A 111 540 00 23 |
- | A 12 154 001 23 | - | - | |
| 002 | FIXING FRAME | 001 | A 11 154 000 23 | - | $267.42 |
| 003 | TIGHTENING SCREW FOR FIXING OF BATTERY |
002 | A 12 054 101 24 | - | - |
| LOCK WASHER B 6 DIN 127 FOR FIXING OF BATTERY |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR FIXING OF BATTERY |
002 | - | - | ||
| RUBBER HOSE, 20 MM LONG ABOVE ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER |
002 | A 00 098 705 32 | - | - | |
| STARTER CABLE FROM POS. POLE TO STARTER MOTOR Replaced by: A 128 540 00 30 |
- | A 18 054 000 30 | - | - | |
| 006 | STARTER CABLE FROM POS. POLE TO STARTER MOTOR |
- | A 12 854 000 30 | - | - |
| STARTER CABLE FROM POS. POLE TO STARTER MOTOR |
- | A 18 054 001 30 | - | - | |
| RUBBER PROTECTIVE CAP FOR STARTER CABLE Replaced by: A 111 546 00 35 |
- | A 13 654 600 35 | - | - | |
| 007 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 11 154 600 35 | - | - |
| 008 | GROUND CABLE FROM NEG.POLE OF BATTERY TO ENGINE |
- | A 18 054 000 31 | - | - |
| GROUND CABLE FROM NEG.POLE OF BATTERY TO ENGINE |
- | A 18 054 004 31 | - | - | |
| 009 | GROMMET FOR STARTER CABLE THROUGH BRACKET AT FRONT WALL |
- | A 00 099 734 81 | - | $1.11 |
| 010 | GROMMET FOR STARTER CABLE THROUGH PARTITION |
001 | A 18 699 707 81 | - | $2.61 |
| FIXING CLAMP FOR STARTER CABLE AT COWL OR PEDAL FLOOR RESP. |
- | A 13 699 504 20 | - | - | |
| LENS-HD. SHEET METAL SCREW BZ 4, 8X9, 5 DIN 7981 FOR STARTER CABLE AT COWL OR PEDAL FLOOR RESP. |
- | - | - | ||
CABLES |
- | XXX XXX XXX XXXX | - | - | |
| MAIN CABLE HARNESS UP TO CHASSIS 7501979 |
- | A 10 554 000 05 | - | - | |
| REPLACED BY 105 540 04 05 TOGETHER WITH 1 FUSE BOX 180 540 04 50 FROM CHASSIS 7501980-7504312 |
- | A 10 554 002 05 | - | - | |
| 015 | MAIN CABLE HARNESS FROM CHASSIS 7504313 |
- | A 10 554 004 05 | - | - |
| MAIN CABLE HARNESS UP TO CHASSIS 7502567 |
- | A 10 554 001 05 | - | - | |
| REPLACED BY 105 540 05 05 TOGETHER WITH 1 FUSE BOX 180 540 04 50 FROM CHASSIS 7502568-7504312 |
- | A 10 554 003 05 | - | - | |
| MAIN CABLE HARNESS FROM CHASSIS 7504313 |
- | A 10 554 005 05 | - | - | |
| 016 | HOUSING, LOWER PART, WITH SOCKET |
001 | A 00 054 506 28 | - | - |
| 017 | GASKET | 001 | A 00 054 500 80 | - | - |
| AUXILIARY CABLE HARNESS | - | A 18 054 007 09 | - | - | |
| AUXILIARY CABLE HARNESS | - | A 18 054 009 09 | - | - | |
| CABLE HARNESS FOR TAIL LAMPS UP TO CHASSIS 7504312 |
- | A 12 154 001 07 | - | - | |
| CABLE HARNESS FOR TAIL LAMPS UP TO CHASSIS 7504312 |
- | A 12 154 002 07 | - | - | |
| 018 | CABLE HARNESS FOR TAIL LAMPS FROM CHASSIS 7504313 |
001 | A 12 154 008 07 | - | - |
| AUXILIARY CABLE HARNESS FROM CONTROL SWITCH, REAR AXLE TO GROUND AS WELL AS LIMIT SWITCH, SERVO AGGREGATE |
- | A 18 054 008 09 | - | - | |
| GROUND CABLE FROM RELAY, TERMINAL 30/51, TO GROUND |
- | A 18 054 029 38 | - | - | |
| 020 | CABLE HARNESS FROM GENERATOR TO REGULATOR |
001 | A 18 054 000 08 | - | $41.76 |
| 021 | RUBBER PROTECTIVE CAP FOR TERMINAL AT GENERATOR DPOS. AND DF |
002 | A 00 054 602 35 | - | - |
| INSULATING HOSE, 220-MM LONG B 10X11, 5 SW DIN 40621 FOR CABLE LAYING TO BLINKER, FRONT ORDER BY THE METER |
002 | - | - | ||
| INSULATING HOSE, 100-MM LONG B 16 X 18 SW DIN 40621 OVER MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER |
001 | - | - | ||
| 023 | CABLE HARNESS FROM CABLE CONNECTORTTWO POLES TO REVERSE DRIVE LIGHT SWITCH |
- | A 12 054 017 38 | - | - |
| CABLE HARNESS FROM CABLE CONNECTORTTWO POLES TO REVERSE DRIVE LIGHT SWITCH |
- | A 18 054 031 38 | - | - | |
| 024 | BRACKET FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH |
001 | A 18 054 600 43 | - | - |
| 025 | GROMMET FOR CABLE HARNESS AT BRACKET |
001 | A 00 099 731 81 | - | $0.98 |
| FIXING CLAMP FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 |
- | A 13 699 500 37 | - | $27.83 | |
| LENS-HD. SHEET METAL SCREW BZ 4, 8X9,5 DIN 7981 FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 |
- | - | - | ||
| FIXING CLAMP FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 |
- | A 12 099 500 01 | - | - | |
| LENS-HD. SCREW AM 5X10 DIN 7985-4S FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 |
- | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR CABLE OF REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT UP TO CHASSIS 8504872 |
- | - | - | ||
| GROUND CABLE FROM STARTER FLANGE TO FRONT WALL Replaced by: A 186 540 03 41 |
- | A 13 654 004 41 | - | - | |
| 026 | GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
001 | A 18 654 003 41 | - | $97.85 |
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE AT FRONT WALL OR BRACKET RESP. ATE BOOSTER BRAKE |
001 | - | - | ||
| HEX. -HD. SCREW M 6X8 DIN 933-8 G FOR GROUND CABLE AT FRONT WALL OR BRACKET RESP. ATE BOOSTER BRAKE |
001 | - | - | ||
| 027 | SCREW WITH LOCKING PLATE FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN |
001 | A 12 042 002 27 | - | $7.40 |
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE, HEAD LIGHT AND FOG LAMP AT WHEEL ARCH PAN |
001 | - | - | ||
| 031 | CABLE CONNECTOR, 5 POLES FOR TAIL LIGHT CABLE HARNESS |
- | A 00 054 619 41 | - | - |
| 031 | CABLE CONNECTOR, 5 POLES FOR TAIL LIGHT CABLE HARNESS |
- | A 00 054 619 41 | - | - |
| CABLE CONNECTOR, 6 POLES FOR TAIL LIGHT CABLE HARNESS |
- | A 00 054 617 41 | - | $7.78 | |
| 032 | CABLE CONNECTOR, 5 POLES FOR STEERING SPINDLE TUBE CABLE HARNESS |
001 | A 00 054 606 41 | - | - |
| 033 | CABLE CONNECTOR, 2 POLES FOR HEATING BLOWER CONNECTION |
002 | A 00 054 618 41 | - | $48.92 |
| LENS-HD. SHEET METAL SCREW BZ 3, 9X9, 5 DIN 7981 FOR CABLE CONNECTOR, 5 POLES AT FRONT WALL |
004 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3, 9X19 DIN 7981 FOR CABLE CONNECTOR, 5 POLES AT WHEEL ARCH PAN |
002 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3, 9X13 DIN 7981 FOR CABLE CONNECTOR, 2 POLES AT WHEEL ARCH PAN |
004 | - | - | ||
| 037 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 18 199 700 81 | - | - |
| 038 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
- | A 00 099 727 81 | - | $1.49 |
| GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
- | A 00 099 730 81 | - | $1.79 | |
| 039 | FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
003 | A 00 098 853 78 | - | - |
| 040 | FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
003 | A 00 098 834 78 | - | $0.36 |
| CABLE CONNECTOR FOR CABLE FROM SHIFTING LEVER TO CONTROL VALVE |
- | A 00 054 600 42 | - | - | |
| GROMMET FOR FUEL TRANSMITTER CABLE Replaced by: A 000 997 18 81 |
- | A 00 099 717 81 | - | - | |
| 042 | GROMMET FOR FUEL TRANSMITTER CABLE |
001 | A 00 099 718 81 | - | - |
| GROMMET FOR LUGGAGE COMPARTMENT COVER, INNER PANEL UP TO CHASSIS 7504312 |
001 | A 00 099 722 81 | - | $0.98 | |
| GROMMET FOR TAILLIGHT CABLE HARNESS, REAR SEAT SUPPORT UP TO CHASSIS 7501186 |
002 | A 00 099 730 81 | - | $1.79 | |
| INSULATING HOSE, 40-MM LONG B 12X13, 6 SW DIN 40621 FOR MAIN CABLE HARNESS AT WHEEL ARCH PAN, LEFT AND RIGHT ORDER BY THE METER |
004 | - | - | ||
| FIXING CLAMP FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN |
009 | A 00 098 833 78 | - | $0.67 | |
| FIXING CLAMP FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN |
005 | A 00 098 834 78 | - | $0.36 | |
| FIXING CLAMP FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 |
001 | A 18 699 502 20 | - | $11.11 | |
| LOCK WASHER B 5 DIN 127 FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 |
001 | - | - | ||
| LENS-HD. SCREW AM 5X10 DIN 7985-4 S FOR TRANSMITTER CABLE UP TO CHASSIS 7504312 |
001 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER, AT REAR CROSS MEMBER FROM CHASSIS 7504313 |
001 | - | - | ||
| FIXING CLAMP 1X8 DIN 72571 FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 |
001 | - | - | ||
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR TAIL LIGHT CABLE HARNESS UP TO CHASSIS 7504312 |
001 | - | - | ||
| 056 | LINK FOR TAIL LIGHT CABLE HARNESS, LEFT AND RIGHT |
008 | A 12 054 601 82 | - | - |
| LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION, TAIL LIGHT |
002 | - | - | ||
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION, TAIL LIGHT |
002 | - | - | ||
| FIXING CLAMP FOR CABLE TO LICENCE PLATE LIGHT AT LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7504312 |
002 | A 00 098 817 78 | - | - | |
| FIXING CLAMP FOR CABLE TO LICENCE PLATE LIGHT AT LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7504312 |
002 | A 18 699 502 20 | - | $11.11 | |
| 061 | CABLE COVER PLATE FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
001 | A 12 054 600 81 | - | - |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
002 | - | - | ||
| FIXING CLAMP FOR CABLE TO CONTROL SWITCH AT REAR CROSS MEMBER |
- | A 18 699 502 20 | - | $11.11 | |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE TO CONTROL SWITCH AT REAR CROSS MEMBER |
- | - | - | ||
| 062 | FIXING CLAMP FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING |
- | A 12 099 500 01 | - | - |
| LENS-HD. SCREW AM 5X12 DIN 7985-4 S FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING |
- | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR CABLE FIXING AT LEFT PEDAL LEVER SHAFT MOUNTING |
- | - | - | ||
| 063 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
- | A 13 699 500 37 | - | $27.83 |
| 063 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
- | A 13 699 500 37 | - | $27.83 |
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| 064 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 501 35 | - | - |
| 065 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
- | A 18 799 500 37 | - | - |
| LENS-HD. SCREW AM 6X15 DIN 7985-4S FOR MAIN CABLE HARNESS AT FRONT WALL |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
002 | - | - | ||
| LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| CAGE CLAMP WITH NUT FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 099 022 91 | - | - | |
| RUBBER HOSE, 15X17 DIA., 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS Replaced by: A 000 997 47 82 |
- | A 12 099 708 82 | - | - | |
| 067 | RUBBER HOSE, 15X17 DIA., 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER |
NB | A 00 099 747 82 | - | - |
| GROUND CABLE FOR PARKING LIGHT WITH ASYMMETRIC DIMMING LIGHT FROM CHASSIS 7505583-7507560 |
002 | A 18 054 030 38 | - | - | |
| FIXING CLAMP FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP |
001 | A 13 699 501 35 | - | - | |
| LENS-HD.SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS AT GLOVE BOX, SHELL PLATE, TOP |
001 | - | - | ||
| FIXING CLAMP FOR CABLE, STOP SWITCH AT BRAKE CABLE OR FOR CABLE TO LIMIT SWITCH RESP. Replaced by: A 001 988 09 78 |
- | A 00 098 838 78 | - | $1.36 | |
| FIXING CLAMP FOR CABLE, STOP SWITCH AT BRAKE CABLE OR FOR CABLE TO LIMIT SWITCH RESP. |
- | A 00 198 809 78 | - | - | |
| FUSE BOX Replaced by: A 180 540 00 50 |
- | A 18 054 003 50 | - | - | |
| FUSE BOX UP TO CHASSIS 7504312 |
001 | A 18 054 000 50 | - | - | |
| FUSE BOX Replaced by: A 180 540 04 50 |
- | A 18 054 009 50 | - | - | |
| 071 | FUSE BOX FROM CHASSIS 7504313 |
001 | A 18 054 004 50 | - | - |
| 072 | COVER FOR FUSE BOX |
001 | A 00 054 502 03 | - | $73.37 |
| 073 | FUSE, 12 AMP. 8 DIN 72581 UP TO CHASSIS 7504312 |
012 | - | - | |
| 073 | FUSE, 12 AMP. 8 DIN 72581 FROM CHASSIS 7504313 |
011 | - | - | |
| 73a | FUSE, 35 AMP. 25 DIN 72581 FROM CHASSIS 7504313 |
001 | - | - | |
| LENS-HD. SHEET METAL SCREW BZ 4,2X19 DIN 7981 |
002 | - | - | ||
| SPRING NUT NO LONGER INSTALLED |
- | A 00 099 413 45 | - | $0.67 | |
| LOCK WASHER B 6 DIN 127 FOR BLINKER TRANSMITTER AT BRACKET, PARTITION |
002 | - | - | ||
| HEX.-HD. SCREW M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT BRACKET, PARTITION |
002 | - | - | ||
INSTRUMENTS AND CONTROLS |
- | XXX XXX XXX XXXX | - | - | |
| PUSH-BUTTON SWITCH FOR INSTRUMENT LIGHTING Replaced by: A 000 545 06 11 |
- | A 12 054 000 44 | - | - | |
| 080 | PUSH-BUTTON SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - | $29.83 |
| 081 | ESCUTCHEON | 001 | A 12 054 500 72 | - | - |
| 082 | FELT RING | 001 | A 00 099 720 40 | - | $0.50 |
| 083 | BUTTON | 001 | A 12 054 502 37 | - | - |
| COMBI-INSTRUMENT WITH KM-GRADUATION RATIO 0.96 - RATIO OF REAR AXLE 1: 4.1 Replaced by: A 121 542 03 01 |
- | A 12 154 202 01 | - | - | |
| COMBI-INSTRUMENT WITH KM-GRADUATION RATIO 0.96 - RATIO OF REAR AXLE 1: 4.1 UP TO CHASSIS 7503492 FURTHER VALID FOR CARS EXPORTED TO MADEIRA AN |
001 | A 12 154 203 01 | - | - | |
| COMBI-INSTRUMENT WITH M.P.H. GRADUATION RATIO 1.54 - RATIO OF REAR AXLE 1: 4.1 UP TO CHASSIS 7503492 FURTHER VALID FOR CARS EXPORTED TO MADEIR |
001 | A 12 154 201 01 | - | - | |
| 084 | COMBI-INSTRUMENT WITH KM - GRADUATION RATIO 0.91 - RATIO OF REAR AXLE 1: 3.9 FROM CHASSIS 7503493 |
001 | A 10 554 205 01 | - | - |
| COMBI-INSTRUMENT WITH M.P.H. GRADUATION RATIO 1.47 - RATIO OF REAR AXLE 1:3.9 FROM CHASSIS 7503493 |
001 | A 10 554 206 01 | - | - | |
| COMBI-INSTRUMENT WITH KM.GRADUATION RATIO 0.845 - RATIO OF REAR AXLE 1: 3.9 EXPORT - SPECIAL REQUEST FOR TIRES 6.40 - 15) |
001 | A 10 554 208 01 | - | - | |
| COMBI-INSTRUMENT WITH M.P.H. GRADUATION RATIO 1.36 - RATIO OF REAR AXLE 1:3.9 EXPORT - SPECIAL REQUEST (FOR TIRES 6.40 - 15) |
001 | A 10 554 207 01 | - | - | |
| KILOMETER COUNTER FOR COMBI-INSTRUMENT 121 542 03 01 |
001 | A 00 154 243 06 | - | - | |
| MILEAGE COUNTER FOR COMBI-INSTRUMENT 121 542 01 01 |
001 | A 00 154 242 06 | - | - | |
| 085 | KILOMETER COUNTER FOR COMBI-INSTRUMENT 105 542 05 01 |
001 | A 00 154 274 06 | - | - |
| MILEAGE COUNTER FOR COMBI-INSTRUMENT 105 542 06 01 |
001 | A 00 154 275 06 | - | - | |
| KILOMETER COUNTER FOR COMBI-INSTRUMENT 105 542 08 01 |
001 | A 00 154 280 06 | - | - | |
| MILEAGE COUNTER FOR COMBI-INSTRUMENT 105 542 07 01 |
001 | A 00 154 281 06 | - | - | |
| 086 | OIL PRESSURE GAUGE | 001 | A 00 054 271 02 | - | - |
| 087 | TELETHERMOMETER CAPILLARY TUBE 1.700 MM LONG |
001 | A 00 154 244 05 | - | - |
| 088 | FUEL GAUGE | 001 | A 00 054 244 03 | - | - |
| 089 | TENSION SPRING FOR FIXING OF COMBI-INSTRUMENT |
002 | A 12 099 317 10 | - | - |
| 090 | RUBBER FRAME FOR COMBI-INSTRUMENT |
001 | A 12 054 202 80 | - | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | - | |
| 091 | LAMP SOCKET | 006 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
006 | - | - | ||
| FIXING CLAMP FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX COVER PLATE |
001 | A 00 098 834 78 | - | $0.36 | |
| CLOCK, WITH MECHANIC DRIVE UP TO CHASSIS 8501881 |
001 | A 12 054 203 11 | - | - | |
| 100 | CLOCK, ELECTRIC 12 VOLT FROM CHASSIS 8501882 |
001 | A 12 054 205 11 | - | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | - | |
| 101 | LAMP SOCKET | 001 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
001 | - | - | ||
| DIMMING RESISTOR FOR INSTRUMENT LIGHTING Replaced by: A 000 545 08 31 |
- | A 00 054 507 31 | - | - | |
| 109 | DIMMING RESISTOR FOR INSTRUMENT LIGHTING |
001 | A 00 054 508 31 | - | - |
| 110 | SWITCH |
001 | A 00 054 517 14 | - | - |
| 111 | ESCUTCHEON FOR PUSH-BUTTON STARTING SWITCH |
001 | A 12 054 503 72 | - | - |
| DISTANCE FLASHLIGHT BLINKER SWITCH, BLACK Replaced by: A 000 545 38 24 |
- | A 00 054 510 24 | - | - | |
| DISTANCE FLASHLIGHT BLINKER SWITCH, BLACK UP TO CHASSIS 7505176 |
001 | A 00 054 538 24 | - | - | |
| DISTANCE FLASHLIGHT BLINKER SWITCH, IVORY COLOURED EXPORT, SPECIAL REQUEST UP TO CHASSIS 7505176 |
- | A 00 054 539 24 | - | - | |
| 113 | DISTANCE FLASHLIGHT BLINKER SWITCH FROM CHASSIS 7505177 |
001 | A 00 054 576 24 | - | - |
| 114 | BLINKER LEVER KNOB, DARK GRAPHIT GREY FROM CHASSIS 7505177 |
001 | A 18 054 502 37 | - | - |
| BLINKER LEVER KNOB, IVORY COLOURED EXPORT, SPECIAL REQUEST FROM CHASSIS 7505177 Replaced by: A 180 545 05 37 |
- | A 18 054 503 37 | - | - | |
| BLINKER LEVER KNOB, IVORY COLOURED EXPORT, SPECIAL REQUEST FROM CHASSIS 7505177 |
001 | A 18 054 505 37 | - | - | |
| 115 | COVER PLATE FOR DISTANCE FLASHLIGHT BLINKER SWITCH FROM CHASSIS 7505177 |
001 | A 18 046 200 23 | - | - |
| LENS-HD. COUNTERSUNK SCREW AM 4X10 DIN 7988-4S VERCHROMT FOR COVER PLATE AT JACKET TUBE FROM CHASSIS 7505177 |
002 | - | - | ||
| 116 | BLINKER TRANSMITTER, | 001 | A 00 054 423 32 | - | - |
| 117 | REVERSING SWITCH FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 75 |
- | A 00 054 591 24 | - | - |
| 118 | BLINKER LEVER KNOB, BLACK FOR REVERSING SWITCH SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 7507929 |
- | A 18 054 502 37 | - | - |
| AUXILIARY CABLE HARNESS FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) FROM CHASSIS 75 |
- | A 18 054 016 09 | - | - | |
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 8506199 |
- | A 18 054 008 60 | - | - | |
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT FLEXIBLE HOSE TO OIL FILTER UP TO CHASSIS 9502716 |
- | A 18 054 009 60 | - | - | |
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT OIL PRESSURE GAUGE, COMBIINSTRUMENT UP TO CHASSIS 8506199 |
- | A 18 054 006 60 | - | - | |
| OIL PRESSURE GAUGE PIPE FOR CONNECTION AT OIL PRESSURE GAUGE, COMBIINSTRUMENT UP TO CHASSIS 9502716 |
- | A 18 054 003 60 | - | - | |
| 123 | OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE FROM CHASSIS 8506200 |
- | A 18 054 013 60 | - | - |
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO CONNECTING PIECE FROM CHASSIS 9502717 |
- | A 12 054 005 60 | - | - | |
| CONNECTING PIECE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9502717 |
- | A 12 854 200 47 | - | - | |
| OIL PRESSURE GAUGE PIPE FROM CONNECTING PIECE TO HOSE FROM CHASSIS 9502717 |
- | A 12 054 006 60 | - | - | |
Replaced by: A 000 997 47 82 |
- | A 12 099 708 82 | - | - | |
| RUBBER HOSE 20 MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE Replaced by: A 000 997 47 82 |
- | A 18 099 715 82 | - | $3.50 | |
| RUBBER HOSE 20 MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 |
- | A 00 099 747 82 | - | - | |
| RUBBER HOSE 20 MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 |
- | A 00 099 747 82 | - | - | |
| 124 | GROMMET FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED |
- | A 18 699 706 81 | - | $1.79 |
| 124 | GROMMET FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 8506199 |
- | A 18 699 706 81 | - | $1.79 |
| 124 | GROMMET FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT IF REQUIRED UP TO CHASSIS 8506199 |
- | A 18 699 706 81 | - | $1.79 |
| LOCK WASHER B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 8506199 |
- | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 9502716 |
- | - | - | ||
| HEX. NUT M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 8506199 |
- | - | - | ||
| HEX. NUT M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT BRACKET, FRONT WALL UP TO CHASSIS 9502716 |
- | - | - | ||
| SPRING WASHER A 8 DIN 137 FROM CHASSIS 8506200 |
- | - | - | ||
| SPRING WASHER A 8 DIN 137 FROM CHASSIS 9502717 |
- | - | - | ||
| HEX. NUT BM 8 DIN 439-5 S FROM CHASSIS 8506200 |
- | - | - | ||
| HEX. NUT BM 8 DIN 439-5 S FROM CHASSIS 9502717 |
- | - | - | ||
| RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT COWL Replaced by: A 000 987 00 32 |
- | A 00 098 709 32 | - | $6.65 | |
| 127 | RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT COWL ORDER BY THE METER |
002 | A 00 098 700 32 | - | - |
| 128 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE AT COWL |
002 | A 13 699 505 01 | - | - |
| LENS-HD.SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT COWL |
002 | - | - | ||
| HOSE OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 |
- | A 13 654 002 59 | - | $57.27 | |
| HOSE OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9502716 |
- | A 13 654 002 59 | - | $57.27 | |
| HOSE OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 8506199 |
- | A 12 154 000 59 | - | - | |
| HOSE OPTIONAL FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9502716 |
- | A 12 154 000 59 | - | - | |
| 130 | HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 8506200 |
- | A 12 854 000 59 | - | $43.69 |
| HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9502717 |
- | A 12 154 002 59 | - | $84.01 | |
| 131 | STPP LIGHT SWITCH SEE ALSO GROUP 42 |
001 | A 00 054 522 09 | - | - |
| 132 | FOOT DIMMER SWITCH | 001 | A 00 054 504 12 | - | - |
| 133 | INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 13 654 501 58 | - | - |
| LENS-HD. COUNTERSUNK SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | - | ||
| 135 | CAGE CLIP WITH NUT FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | A 00 099 025 91 | - | - |
| GROMMET FOR CABLE TO FOOT DIMMER SWITCH |
- | A 00 099 727 81 | - | $1.49 | |
| 137 | FLEXIBLE DRIVE SHAFT, 1.750-MM LONG |
- | A 12 054 203 07 | - | - |
| FLEXIBLE DRIVE SHAFT, 1.820-MM LONG |
- | A 10 554 200 07 | - | - | |
| 138 | GROMMET FOR FLEXIBLE DRIVE SHAFT THROUGH FORK MEMBER |
- | A 18 099 712 81 | - | - |
| GROMMET FOR FLEXIBLE DRIVE SHAFT THROUGH FORK MEMBER |
- | A 18 699 704 81 | - | $2.33 | |
| 139 | GROMMET FOR LOCKING PASSAGE OF THIRD FORK MEMBER |
- | A 18 098 700 44 | - | - |
| LOCKING WASHER FOR LOCKING PASSAGE OF THIRD FORK MEMBER Replaced by: A 000 987 04 44 |
- | A 00 098 700 44 | - | $2.27 | |
| LOCKING WASHER RUBBER FOR LOCKING PASSAGE OF THIRD FORK MEMBER |
- | A 00 098 704 44 | - | - | |
| FIXING CLAMP FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT |
- | A 00 098 834 78 | - | $0.36 | |
| GROMMET FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT |
- | A 00 099 731 81 | - | $0.98 | |
| GROMMET FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT |
- | A 18 699 704 81 | - | $2.33 | |
| 140 | FIXING CLAMP FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
- | A 12 099 500 01 | - | - |
| LENS-HD.SCREW AM 5X10 DIN 7985-4S FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
- | - | - | ||
| LOCK WASHER B 5 DIN 127 |
- | - | - | ||
| 143 | 3-ELEMENT VOLTAGE | 001 | A 00 015 455 06 | - | - |
| 145 | RUBBER BUSHING | 003 | A 00 015 402 50 | - | - |
| LOCK WASHER B 6 DIN 127 FOR REGULATOR AT BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| LENS-HD.SCREW AM 6X20 DIN 7985-4S FOR REGULATOR AT BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| 148 | GROMMET FOR CABLE FROM VOLTAGE REGULATOR TO GENERATOR |
003 | A 00 099 707 81 | - | $1.35 |
| 149 | SOCKET FOR HAND LAMP |
001 | A 00 054 505 25 | - | $11.93 |
| AUXILIARY CABLE HARNESS SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA |
001 | A 12 154 017 09 | - | - | |
| INSULATING HOSE 100-MM LONG B 20 X 22,4 SW DIN 40621 OVER MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER SPECIAL REQUEST FOG |
001 | - | - | ||
| FUSE BOX, 2-POLE AT FRONT WALL SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA |
001 | A 00 054 503 01 | - | - | |
| CYLINDRICAL SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRESH AIR BOX, LEFT SPECIAL REQUEST FOG LIGHT SWITCHING FOR CARS EXPORTED TO THE USA |
001 | - | - | ||
| 150 | HORN, BASS SOUND | 001 | A 00 054 233 20 | - | - |
| 151 | HORN, HIGH SOUND | 001 | A 00 054 234 20 | - | - |
| HORN, BASS SOUND SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 154 209 20 | - | - | |
| HORN, MIDDLE SOUND SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 154 210 20 | - | - | |
| HEX.-HD. SCREW M 10X28 DIN 931-8 G FOR HORN AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET |
002 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN |
004 | - | - | ||
| CYLINDRICAL SCREW AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN |
004 | - | - | ||
| 157 | FIXING CLAMP FOR CABLE TO HORN |
001 | A 00 098 833 78 | - | $0.67 |
| 160 | IGNITION COIL | 001 | A 00 015 807 03 | - | $138.88 |
| 161 | FIXING CLAMP FOR IGNITION COIL |
001 | A 00 015 802 40 | - | - |
| CYLINDRICAL SCREW BM 5X40 DIN 84-4 S |
001 | - | - | ||
| SQUARE NUT M 5 DIN 562 |
001 | - | - | ||
| HEX.-HD.SCREW M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| 167 | RUBBER PROTECTIVE CAP FOR IGNITION COIL |
002 | A 00 054 602 35 | - | - |
| 168 | COMPENSATING RESISTANCE | 001 | A 00 015 801 45 | - | - |
| 169 | BRACKET FOR COMPENSATING RESISTANCE |
001 | A 18 015 800 40 | - | - |
| LENS-HD.SHEET METAL SCREW B 3,5X6,5 DIN 7981 FOR COMPENSATING RESISTANCE AT SUPPORTING PLATE |
002 | - | - | ||
| 171 | CABLE FOR COMPENSATING RESISTANCE, IGNITION COIL |
001 | A 18 054 600 02 | - | - |
| INSULATING HOSE, 210-MM LONG B 4X5 DIN 40621 FOR CABLE FROM COMPENSATING RESISTANCE, IGNITION COIL ORDER BY THE METER |
001 | - | - | ||
| CONTACTOR 12 V FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL Replaced by: A 000 542 27 19 |
001 | A 00 054 215 19 | - | - | |
| CONTACTOR 12 V FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL |
001 | A 00 054 227 19 | - | - | |
| ELECTRIC CABLE BLACK 80-MM LONG B 1 DIN 72551 FROM RELAY, TERMINAL 30 TO RELAY, TERMINAL 86 ORDER BY THE METER FOR CARS WITH BLINKER SY |
001 | - | - | ||
| TERMINAL 4X0,8 N 261 FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL |
005 | - | - | ||
| GROMMET FOR CARS WITH BLINKER SYSTEM EXPORTED TO AUSTRIA AND PORTUGAL |
005 | A 00 099 701 81 | - | $0.47 | |
| 172 | CONTACTOR 12 V | - | A 00 054 227 19 | - | - |
| LENS-HD.SCREW AM 4X18 DIN 7985-4S FOR CONTACTOR AT LEFT WHEEL ARCH PAN |
- | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CONTACTOR AT LEFT WHEEL ARCH PAN |
- | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR CONTACTOR AT LEFT WHEEL ARCH PAN |
- | - | - | ||
| REPLACED BY 001 545 12 24 TOGETHER WITH 1 TIGHTENING WASHER 128 350 00 67 |
- | A 00 054 582 24 | - | - | |
| 175 | CONTROLS SWITCH AT REAR AXLE SUSPENSION SIMPLICITY OF SPARE PARTS |
- | A 00 154 512 24 | - | - |
| GUIDE CUP | - | A 00 054 502 38 | - | - | |
| 176 | OPERATION ROD | - | A 00 054 500 78 | - | - |
| 177 | TENSION SPRING | - | A 00 054 500 97 | - | - |
| 178 | GUIDE CUP | - | A 00 054 502 38 | - | - |
| HEX.-HD.SCREW M 6X10 DIN 933-8 G FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION |
- | - | - | ||
| WASHER 6,4 DIN 125 FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION |
- | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR CONTROL SWITCH AT HOUSING REAR AXLE SUSPENSION |
- | - | - | ||
| ADDITIONAL CABLE HARNESS FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) |
- | A 18 054 019 09 | - | - | |
| ADDITIONAL CABLE HARNESS FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) |
- | A 18 054 020 09 | - | - | |
| TEMPERATURE SIGNAL LIGHT AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) |
- | A 00 054 568 15 | - | - | |
| TEMPERATURE SIGNAL LIGHT WITH ENGLISH READING AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) |
- | A 00 054 569 15 | - | - | |
| LAMP SOCKET FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) |
- | A 00 054 511 19 | - | - | |
| BULB H 12 V 2 W DIN 72601 FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) |
- | - | - | ||
| RUBBER PROTECTIVE CAP FOR TEMPERATURE SIGNAL LIGHT FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE ALSO GROUP 25) |
- | A 00 015 900 85 | - | - | |
| LENS-HD.SHEET METAL SCREW B 2,2 X 9,5 DIN 7981 FOR TEMPERATURE SIGNAL LIGHT AT JACKET TUBE FOR LATER INSTALLATION TEMPERATURE SIGNAL LIGHT (SEE AL |
- | - | - |
- To find out where to buy the item or equivalent, click on the part number.