Geri Dön

FG 120.002 - ENGINE HOUSING Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv

№- Name A* Part number A Part number, Price per Unit., $

ENGINE		 - XXX XXX XXX XXXX - -
ENGINE, COMPLETE
WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION		 001 A 18 101 009 00  - -
ENGINE, COMPLETE
WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION		 001 A 18 101 010 00  - -
ENGINE, COMPLETE
WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION EXPORT		 001 A 18 101 011 00  - -
ENGINE, COMPLETE
WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION EXPORT		 001 A 18 101 015 00  - -

CYLINDER CRANKCASE		 - XXX XXX XXX XXXX - -
001 CYLINDER CRANKCASE 001 A 18 101 009 08  - -
002 COVER PLATE
FOR CORED HOLE OF OIL PUMP DRIVE, LATERAL		 001 B 25 N 59 5N59a - -
COVER PLATE
25 DIN 470 FOR CORED HOLE OF OIL PUMP DRIVE, LATERAL FOR REPAIRS		 001 - -
003 COVER PLATE
FOR CORED HOLE IN CYLINDER CRANKCASE, FRONT		 001 B 30 N 59 0N59a - -
COVER PLATE
30 DIN 470 FOR CORED HOLE IN CYLINDER CRANKCASE, FRONT FOR REPAIRS		 001 - -
004 COVER PLATE
FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR		 005 B 40 N 59 0N59a - -
COVER PLATE
40 DIN 470 FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR FOR REPAIRS		 005 - -
005 COVER PLATE
FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR		 001 B 50 N 59 0N59a - -
COVER PLATE
50 DIN 470 FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR FOR REPAIRS		 001 - -
006 CORE PLUG
FOR WATER HOLE IN CYLINDER CRANKCASE		 001 A 00 099 700 01  - -
007 DOWEL PIN
10 X 20 N 37 B FOR OIL PAN AT CYLINDER CRANKCASE		 002 - -
REPLACED BY
181 011 04 11 TOGETHER WITH 2 WASHER 121 990 12 40 UP TO ENGINE NO. 55 09950		 - A 18 101 103 11  - -
008 FIRST CRANKSHAFT
BEARING CAP CRANK SIDE OPTIONAL FROM ENGINE NO. 55 09951		 001 A 18 101 104 11  - -
FIRST CRANKSHAFT
BEARING CAP CRANK SIDE OPTIONAL		 001 A 18 101 105 11  - -
REPLACED BY
181 011 05 12 TOGETHER WITH 2 WASHER 121 990 12 40 UP TO ENGINE NO. 55 09950		 - A 18 101 104 12  - -
009 SECOND CRANKSHAFT
BEARING CAP CENTRAL BEARING (LAPPED BEARING) OPTIONAL FROM ENGINE NO. 55 09951		 001 A 18 101 105 12  - -
SECOND CRANKSHAFT
BEARING CAP CENTRAL BEARING (LAPPED BEARING) OPTIONAL		 001 A 18 101 106 12  - -
REPLACED BY
181 011 06 13 TOGETHER WITH 2 WASHER 121 990 12 40 UP TO ENGINE NO. 55 09950		 - A 18 101 105 13  - -
010 THIRD CRANKSHAFT
BEARING CAP FLYWHEEL SIDE OPTIONAL FROM ENGINE NO. 55 09951		 001 A 18 101 106 13  - -
THIRD CRANKSHAFT
BEARING CAP FLYWHEEL SIDE OPTIONAL		 001 A 18 101 107 13  - -
011 HEX.-HD. SCREW
M 12X75 DIN 931-10 K FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE		 006 - -
LOCKING PLATE
FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE UP TO ENGINE NO. 45 16016		 - A 13 699 403 30  - -
012 CYLINDRICAL PIN
8 M6X16 DIN 7 FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE		 006 - -
12a WASHER
FOR CRANKSHAFT BEARING CAP FROM ENGINE NO. 55 09951		 006 A 12 199 012 40  - -
013 DOWEL PIN
8X14 N 37 B FOR TIMING GEAR CASE COVER AT CYLINDER CRANKCASE		 002 - -
014 SEAL HOLDER HALF
FOR OIL SEALING OF CRANKSHAFT		 001 A 18 103 100 58  - -
015 CYLINDRICAL PIN
FOR CLUTCH HOUSING AT CYLINDER CRANKCASE		 002 A 18 699 108 01  - -
016 VALVE SEAT
RING, EXHAUST, STANDARD = 8-MM HIGH, EXTERIOR DIA., 34,625-34,635-MM		 004 A 13 605 301 32  - -
VALVE SEAT
RING, EXHAUST, REPAIR SIZE I=8.2-MM HIGH, EXTERIOR DIA., 35.125-35.135-MM FOR REPAIRS		 004 A 13 605 306 32  - -
VALVE SEAT
RING, EXHAUST, REPAIR SIZE II = 8.4-MM HIGH, EXTERIOR DIA., 35.625-35.635-MM FOR REPAIRS		 004 A 13 605 307 32  - -
VALVE SEAT
RING, EXHAUST, REPAIR SIZE III = 8.6-MM HIGH, EXTERIOR DIA., 36.125-36.135-MM FOR REPAIRS		 004 A 13 605 308 32  - -
017 VALVE SEAT
RING, INTAKE, STANDARD = 6.5-MM HIGH, EXTERIOR DIA., 34.625-34.635-MM		 004 A 13 605 300 31  - -
VALVE SEAT
RING, INTAKE, REPAIR SIZE I = 6.7-MM HIGH, EXTERIOR DIA., 35.125-35.135-MM FOR REPAIRS		 004 A 13 605 301 31  - -
VALVE SEAT
RING, INTAKE, REPAIR SIZE II=6.9-MM HIGH, EXTERIOR DIA., 35.625-35.635-MM FOR REPAIRS		 004 A 13 605 302 31  - -
018 VALVE GUIDE,
EXHAUST, STANDARD = 14.00-MM IN EXTERIOR DIA.		 004 A 18 105 001 24  - -
019 SNAP RING
14 DIN 9045		 004 - -
VALVE GUIDE,
EXHAUST, REPAIR SIZE I = 14.05-MM IN EXTERIOR DIA. FOR REPAIRS		 004 A 18 105 304 30  - -
VALVE GUIDE,
EXHAUST, REPAIR SIZE II = 14.10-MM IN EXTERIOR DIA. FOR REPAIRS		 004 A 18 105 305 30  - $13.02
VALVE GUIDE,
EXHAUST, EXTERIOR DIA., 14.015-MM FOR REPAIRS		 004 A 18 105 306 30  - -
020 VALVE GUIDE,
INTAKE, INTERIOR DIA. = STANDARD		 004 A 13 605 303 30  - -
VALVE GUIDE,
INTAKE, INTERIOR DIA., BY 0.3-MM NARROWER FOR REPAIRS		 004 A 13 605 300 30  - $13.59
VALVE GUIDE,
INTAKE, EXTERIOR DIA., 14.03-MM FOR REPAIRS		 004 A 13 605 305 30  - $14.00
021 SCREW PLUG
FOR OIL CHANNEL, FRONT AND REAR		 002 A 13 699 700 06  - -
022 SEALING RING
A 32X40 DIN 7603 A1 FOR COOLING-WATER INLET		 001 - -
023 THREADED NIPPLE
FOR COOLING-WATER INLET		 001 A 13 699 700 72  - $20.79
024 STUD BOLT
M 10X30 DIN 939-5 S FOR STARTER MOTOR AT CYLINDER CRANKCASE UP TO ENGINE NO. 45 08316		 002 - -
024 STUD BOLT
M 10X30 DIN 939-5 S FOR STARTER MOTOR AT CYLINDER CRANKCASE FROM ENGINE NO. 45 08317		 001 - -
025 STUD BOLT
FOR STARTER MOTOR AT CYLINDER CRANKCASE FROM ENGINE NO. 45 08317		 001 A 63 699 002 05  - -
026 STUD BOLT
M 10X30 DIN 939-5 S FOR GENERATOR SUPPORT AT CYLINDER CRANKCASE		 002 - -
027 STUD BOLT
M 10X35 DIN 939-5 S FOR SUCTION PIPE AND EXHAUST MANIFOLD AT CYLINDER CRANKCASE		 006 - -
028 STUD BOLT
M 10X42 DIN 939-5 S FOR TRANSMISSION AT CYLINDER CRANKCASE		 003 - -
029 STUD BOLT
M 10X52 DIN 939-5 S FOR TRANSMISSION AT CYLINDER CRANKCASE		 001 - -
030 STUD BOLT
FOR ENGINE MOUNTING FLANGE AT CYLINDER CRANKCASE		 001 A 13 699 000 05  - $0.16
031 STUD BOLT
M 12X20 DIN 939-5 S FOR ENGINE MOUNTING FLANGE AT CYLINDER CRANKCASE		 001 - -
033 SEALING RING
A 14X18 DIN 7603 A1 FOR OIL LINE TO OIL FILTER		 001 - -
034 THREADED NIPPLE
8 DIN 7627-5 S FOR OIL LINE TO OIL FILTER		 001 - -
040 CYLINDER LINER
WITHOUT COLLAR FOR REPAIRS		 004 A 18 101 100 10  - -
041 CYLINDER LINER
WITH COLLAR FOR REPAIRS		 004 A 18 101 101 10  - -

TIMING GEAR CASE COVER		 - XXX XXX XXX XXXX - -
045 TIMING GEAR CASE COVER 001 A 18 101 011 17  - -
046 STUD BOLT
M 8X25 DIN 835-5 S FOR FUEL PUMP MOUNTING		 002 - -
047 SEALING RING
D 14X20 DIN 7603 A1		 001 - -
048 SCREW PLUG
M 14X1,5 DIN 7604		 001 - -
050 GASKET
BETWEEN TIMING GEAR CASE COVER AND CYLINDER CRANKCASE		 001 A 18 101 500 20  - -
051 WASHER
6,4 DIN 125 FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE UP TO ENGINE NO. 00583/53		 012 - -
051 WASHER
6,4 DIN 125 FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 00584/53 UP TO ENGINE NO. 65 06043		 015 - -
051 WASHER
6,4 DIN 125 FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 65 06044		 014 - -
HEX.-HD. SCREW
M 6X18 DIN 933-8 G FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE UP TO ENGINE NO. 00583/53		 012 - -
052 HEX.-HD. SCREW
M 6X22 DIN 933-8 G FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 00584/53 UP TO ENGINE NO. 65 06043		 015 - -
052 HEX.-HD. SCREW
M 6X22 DIN 933-8 G FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 65 06044		 014 - -
053 SPACER SLEEVE
FROM ENGINE NO. 65 06044		 001 A 83 699 104 40  - -
054 FIXING SCREW
WITH TIMING NEEDLE FROM ENGINE NO. 65 06044		 001 A 63 601 502 71  - -

VALVE CHAMBER COVER		 - XXX XXX XXX XXXX - -
060 VALVE CHAMBER
COVER WITH BREATHER FILTER		 001 A 18 101 007 18  - -
062 BREATHER FILTER
WITH PIPE CLAMP FROM ENGINE NO. 55 09923		 001 A 00 001 803 60  - -
STRAINER
UP TO ENGINE NO. 55 09922		 001 A 15 901 000 71  - -
COTTER PIN
2X30 DIN 94 UP TO ENGINE NO. 55 09922		 001 - -
064 GASKET
FOR VALVE CHAMBER COVER		 001 A 18 101 501 22  - $21.69
065 GASKET
OPTIONAL FOR VALVE CHAMBER COVER		 004 A 13 601 100 79  - -
GASKET
OPTIONAL FOR VALVE CHAMBER COVER		 004 A 13 601 101 79  - -
066 WASHER
8,4 DIN 125		 002 - -
067 HEX.-HD. SCREW 002 A 15 301 500 71  - -

OIL PAN		 - XXX XXX XXX XXXX - -
070 OIL PAN 001 A 18 101 020 13  - -
071 THREADED BUSHING
6/10X13 N 195 A FOR TIMING GEAR CASE COVER AT OIL PAN		 007 - -
072 THREADED BUSHING
10/14X13 N 195 A FOR TRANSMISSION FLANGE AT OIL PAN		 003 - -
073 SEAL HOLDER HALF
FOR OIL SEALING OF CRANKSHAFT		 001 A 18 103 100 58  - -
075 SEALING RING
C 26X32 DIN 7603 CU-ASB. FOR OIL DRAIN		 001 - -
076 SCREW PLUG, GALVANIZED
FOR OIL DRAIN		 001 A 13 699 712 30  - -
077 WASHER
10,5 DIN 125 FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE		 002 - -
078 HEX.-HD. SCREW
M 10X75 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE		 002 - -
079 WASHER
8,4 DIN 125 FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE		 014 - -
080 HEX.-HD. SCREW
M 8X22 DIN 933-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE		 013 - -
081 HEX.-HD. SCREW
M 8X25 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE		 001 - -
082 HOLDER
FOR RELEASE SPRING		 001 A 18 107 201 40  - -
083 HEX.-HD. SCREW
M 8X28 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE, AND OF BRACKET FOR BREATHER PIPE UP TO ENGINE NO. 45 003		 002 - -
083 HEX.-HD. SCREW
M 8X28 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE, AND OF BRACKET FOR BREATHER PIPE FROM ENGINE NO. 45 0039		 001 - -

CYLINDER HEAD		 - XXX XXX XXX XXXX - -
090 CYLINDER HEAD,
COMPRESSION RATIO, 6.7:1		 001 A 18 101 012 20  - $3.58
CYLINDER HEAD,
COMPRESSION RATIO, 7.5:1 EXPORT FOR COUNTRIES AT MORE THAN 2,000 M ABOVE SEA-LEVEL		 001 A 18 101 014 20  - -
091 COVER PLATE 002 A 18 199 700 25  - -
COVER PLATE,
EXTERIOR DIA., 26 H 11 FOR REPAIRS		 002 A 18 199 701 25  - -
092 SEALING RING
A 14X18 DIN 7603 A1 FOR SEAL, INSTEAD OF THERMOSTAT		 001 - -
093 SCREW PLUG
AM 14X1,5 DIN 7604 FOR SEAL, INSTEAD OF THERMOSTAT		 001 - -
094 CYLINDER HEAD GASKET
OPTIONAL		 001 A 13 601 604 20  - -
CYLINDER HEAD GASKET
OPTIONAL		 001 A 18 101 607 20  - -
095 ADJUSTING RING
FOR CYLINDER HEAD AT CYLINDER CRANKCASE		 001 A 13 601 600 59  - $6.71
096 HEX.-HD. SCREW M 12 X 65
FOR CYLINDER HEAD AT CYLINDER CRANKCASE		 013 A 13 699 004 01  - -
097 HEX.-HD. SCREW M 10 X 100
FOR CYLINDER HEAD AT CYLINDER CRANKCASE		 002 A 13 699 006 01  - -
098 WASHER
10,5 DIN 125 FOR CYLINDER HEAD AT CYLINDER CRANKCASE		 002 - -
099 WASHER
13 DIN 125 FOR CYLINDER HEAD AT CYLINDER CRANKCASE		 011 - -

OIL FILLER		 - XXX XXX XXX XXXX - -
100 OIL FILLER 001 A 18 101 010 64  - -
101 COVER WITH INSCRIPTION 001 A 18 101 000 68  - -
102 SEALING RING 001 A 63 601 803 80  - $4.53
103 SNAP RING
FOR OIL FILLER AT CYLINDER CRANKCASE		 001 A 15 399 400 40  - -
104 BREATHER LINE 001 A 18 101 001 70  - -
BREATHER LINE
EXPORT		 001 A 18 101 003 70  - -
PIPE CLAMP
FOR BREATHER LINE EXPORT		 001 A 18 101 802 40  - -
PIPE CLAMP
FOR BREATHER LINE EXPORT		 001 A 18 101 803 40  - -
RUBBER HOSE
TO CONNECT BREATHER LINE TO OIL-BATH AIR FILTER EXPORT		 001 A 18 199 705 82  - -
105 UNION NUT
10 M 18X1,5 DIN 7606 FOR BREATHER LINE AT OIL FILLER		 001 - -
106 FIXING CLAMP 001 A 18 199 507 01  - -
107 HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR FIXING CLAMP AT STAY FOR INTAKE NOISE DAMPER		 001 - -
108 LOCK WASHER
B 5 DIN 127 FOR FIXING CLAMP AT STAY FOR INTAKE NOISE DAMPER		 001 - -
109 HEX. NUT
M 5 DIN 934-5 S FOR FIXING CLAMP AT STAY FOR INTAKE NOISE DAMPER		 001 - -

OIL DIPSTICK		 - XXX XXX XXX XXXX - -
110 OIL DIPSTICK 001 A 18 101 002 72  - -
111 SEALING RING
FOR OIL DIPSTICK		 001 A 13 699 700 41  - $0.80
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.