Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 120.010 - ENGINE HOUSING Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
№- | Name | A* | Part number | A | Part number, Price per Unit., $ |
ENGINE |
- | XXX XXX XXX XXXX | - | - | |
ENGINE, COMPLETE WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION |
001 | A 18 101 009 00 | - | - | |
ENGINE, COMPLETE WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION |
001 | A 18 101 010 00 | - | - | |
ENGINE, COMPLETE WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION EXPORT |
001 | A 18 101 011 00 | - | - | |
ENGINE, COMPLETE WITH STARTER AND GENERATOR, WITHOUT CLUTCH AND TRANSMISSION EXPORT |
001 | A 18 101 015 00 | - | - | |
CYLINDER CRANKCASE |
- | XXX XXX XXX XXXX | - | - | |
001 | CYLINDER CRANKCASE | 001 | A 18 101 009 08 | - | - |
002 | COVER PLATE FOR CORED HOLE OF OIL PUMP DRIVE, LATERAL |
001 | B 25 N 59 5N59a | - | - |
COVER PLATE 25 DIN 470 FOR CORED HOLE OF OIL PUMP DRIVE, LATERAL FOR REPAIRS |
001 | - | - | ||
003 | COVER PLATE FOR CORED HOLE IN CYLINDER CRANKCASE, FRONT |
001 | B 30 N 59 0N59a | - | - |
COVER PLATE 30 DIN 470 FOR CORED HOLE IN CYLINDER CRANKCASE, FRONT FOR REPAIRS |
001 | - | - | ||
004 | COVER PLATE FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR |
005 | B 40 N 59 0N59a | - | - |
COVER PLATE 40 DIN 470 FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR FOR REPAIRS |
005 | - | - | ||
005 | COVER PLATE FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR |
001 | B 50 N 59 0N59a | - | - |
COVER PLATE 50 DIN 470 FOR CORED HOLE IN CYLINDER CRANKCASE, LATERAL AND REAR FOR REPAIRS |
001 | - | - | ||
006 | CORE PLUG FOR WATER HOLE IN CYLINDER CRANKCASE |
001 | A 00 099 700 01 | - | - |
007 | DOWEL PIN 10 X 20 N 37 B FOR OIL PAN AT CYLINDER CRANKCASE |
002 | - | - | |
REPLACED BY 181 011 04 11 TOGETHER WITH 2 WASHER 121 990 12 40 UP TO ENGINE NO. 55 09950 |
- | A 18 101 103 11 | - | - | |
008 | FIRST CRANKSHAFT BEARING CAP CRANK SIDE OPTIONAL FROM ENGINE NO. 55 09951 |
001 | A 18 101 104 11 | - | - |
FIRST CRANKSHAFT BEARING CAP CRANK SIDE OPTIONAL |
001 | A 18 101 105 11 | - | - | |
REPLACED BY 181 011 05 12 TOGETHER WITH 2 WASHER 121 990 12 40 UP TO ENGINE NO. 55 09950 |
- | A 18 101 104 12 | - | - | |
009 | SECOND CRANKSHAFT BEARING CAP CENTRAL BEARING (LAPPED BEARING) OPTIONAL FROM ENGINE NO. 55 09951 |
001 | A 18 101 105 12 | - | - |
SECOND CRANKSHAFT BEARING CAP CENTRAL BEARING (LAPPED BEARING) OPTIONAL |
001 | A 18 101 106 12 | - | - | |
REPLACED BY 181 011 06 13 TOGETHER WITH 2 WASHER 121 990 12 40 UP TO ENGINE NO. 55 09950 |
- | A 18 101 105 13 | - | - | |
010 | THIRD CRANKSHAFT BEARING CAP FLYWHEEL SIDE OPTIONAL FROM ENGINE NO. 55 09951 |
001 | A 18 101 106 13 | - | - |
THIRD CRANKSHAFT BEARING CAP FLYWHEEL SIDE OPTIONAL |
001 | A 18 101 107 13 | - | - | |
011 | HEX.-HD. SCREW M 12X75 DIN 931-10 K FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
006 | - | - | |
LOCKING PLATE FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE UP TO ENGINE NO. 45 16016 |
- | A 13 699 403 30 | - | - | |
012 | CYLINDRICAL PIN 8 M6X16 DIN 7 FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
006 | - | - | |
12a | WASHER FOR CRANKSHAFT BEARING CAP FROM ENGINE NO. 55 09951 |
006 | A 12 199 012 40 | - | - |
013 | DOWEL PIN 8X14 N 37 B FOR TIMING GEAR CASE COVER AT CYLINDER CRANKCASE |
002 | - | - | |
014 | SEAL HOLDER HALF FOR OIL SEALING OF CRANKSHAFT |
001 | A 18 103 100 58 | - | - |
015 | CYLINDRICAL PIN FOR CLUTCH HOUSING AT CYLINDER CRANKCASE |
002 | A 18 699 108 01 | - | - |
016 | VALVE SEAT RING, EXHAUST, STANDARD = 8-MM HIGH, EXTERIOR DIA., 34,625-34,635-MM |
004 | A 13 605 301 32 | - | - |
VALVE SEAT RING, EXHAUST, REPAIR SIZE I=8.2-MM HIGH, EXTERIOR DIA., 35.125-35.135-MM FOR REPAIRS |
004 | A 13 605 306 32 | - | - | |
VALVE SEAT RING, EXHAUST, REPAIR SIZE II = 8.4-MM HIGH, EXTERIOR DIA., 35.625-35.635-MM FOR REPAIRS |
004 | A 13 605 307 32 | - | - | |
VALVE SEAT RING, EXHAUST, REPAIR SIZE III = 8.6-MM HIGH, EXTERIOR DIA., 36.125-36.135-MM FOR REPAIRS |
004 | A 13 605 308 32 | - | - | |
017 | VALVE SEAT RING, INTAKE, STANDARD = 6.5-MM HIGH, EXTERIOR DIA., 34.625-34.635-MM |
004 | A 13 605 300 31 | - | - |
VALVE SEAT RING, INTAKE, REPAIR SIZE I = 6.7-MM HIGH, EXTERIOR DIA., 35.125-35.135-MM FOR REPAIRS |
004 | A 13 605 301 31 | - | - | |
VALVE SEAT RING, INTAKE, REPAIR SIZE II=6.9-MM HIGH, EXTERIOR DIA., 35.625-35.635-MM FOR REPAIRS |
004 | A 13 605 302 31 | - | - | |
018 | VALVE GUIDE, EXHAUST, STANDARD = 14.00-MM IN EXTERIOR DIA. |
004 | A 18 105 001 24 | - | - |
019 | SNAP RING 14 DIN 9045 |
004 | - | - | |
VALVE GUIDE, EXHAUST, REPAIR SIZE I = 14.05-MM IN EXTERIOR DIA. FOR REPAIRS |
004 | A 18 105 304 30 | - | - | |
VALVE GUIDE, EXHAUST, REPAIR SIZE II = 14.10-MM IN EXTERIOR DIA. FOR REPAIRS |
004 | A 18 105 305 30 | - | $13.02 | |
VALVE GUIDE, EXHAUST, EXTERIOR DIA., 14.015-MM FOR REPAIRS |
004 | A 18 105 306 30 | - | - | |
020 | VALVE GUIDE, INTAKE, INTERIOR DIA. = STANDARD |
004 | A 13 605 303 30 | - | - |
VALVE GUIDE, INTAKE, INTERIOR DIA., BY 0.3-MM NARROWER FOR REPAIRS |
004 | A 13 605 300 30 | - | $13.59 | |
VALVE GUIDE, INTAKE, EXTERIOR DIA., 14.03-MM FOR REPAIRS |
004 | A 13 605 305 30 | - | $14.00 | |
021 | SCREW PLUG FOR OIL CHANNEL, FRONT AND REAR |
002 | A 13 699 700 06 | - | - |
022 | SEALING RING A 32X40 DIN 7603 A1 FOR COOLING-WATER INLET |
001 | - | - | |
023 | THREADED NIPPLE FOR COOLING-WATER INLET |
001 | A 13 699 700 72 | - | $20.79 |
024 | STUD BOLT M 10X30 DIN 939-5 S FOR STARTER MOTOR AT CYLINDER CRANKCASE UP TO ENGINE NO. 45 08316 |
002 | - | - | |
024 | STUD BOLT M 10X30 DIN 939-5 S FOR STARTER MOTOR AT CYLINDER CRANKCASE FROM ENGINE NO. 45 08317 |
001 | - | - | |
025 | STUD BOLT FOR STARTER MOTOR AT CYLINDER CRANKCASE FROM ENGINE NO. 45 08317 |
001 | A 63 699 002 05 | - | - |
026 | STUD BOLT M 10X30 DIN 939-5 S FOR GENERATOR SUPPORT AT CYLINDER CRANKCASE |
002 | - | - | |
027 | STUD BOLT M 10X35 DIN 939-5 S FOR SUCTION PIPE AND EXHAUST MANIFOLD AT CYLINDER CRANKCASE |
006 | - | - | |
028 | STUD BOLT M 10X42 DIN 939-5 S FOR TRANSMISSION AT CYLINDER CRANKCASE |
003 | - | - | |
029 | STUD BOLT M 10X52 DIN 939-5 S FOR TRANSMISSION AT CYLINDER CRANKCASE |
001 | - | - | |
030 | STUD BOLT FOR ENGINE MOUNTING FLANGE AT CYLINDER CRANKCASE |
001 | A 13 699 000 05 | - | $0.16 |
031 | STUD BOLT M 12X20 DIN 939-5 S FOR ENGINE MOUNTING FLANGE AT CYLINDER CRANKCASE |
001 | - | - | |
033 | SEALING RING A 14X18 DIN 7603 A1 FOR OIL LINE TO OIL FILTER |
001 | - | - | |
034 | THREADED NIPPLE 8 DIN 7627-5 S FOR OIL LINE TO OIL FILTER |
001 | - | - | |
040 | CYLINDER LINER WITHOUT COLLAR FOR REPAIRS |
004 | A 18 101 100 10 | - | - |
041 | CYLINDER LINER WITH COLLAR FOR REPAIRS |
004 | A 18 101 101 10 | - | - |
TIMING GEAR CASE COVER |
- | XXX XXX XXX XXXX | - | - | |
045 | TIMING GEAR CASE COVER | 001 | A 18 101 011 17 | - | - |
046 | STUD BOLT M 8X25 DIN 835-5 S FOR FUEL PUMP MOUNTING |
002 | - | - | |
047 | SEALING RING D 14X20 DIN 7603 A1 |
001 | - | - | |
048 | SCREW PLUG M 14X1,5 DIN 7604 |
001 | - | - | |
050 | GASKET BETWEEN TIMING GEAR CASE COVER AND CYLINDER CRANKCASE |
001 | A 18 101 500 20 | - | - |
051 | WASHER 6,4 DIN 125 FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE UP TO ENGINE NO. 00583/53 |
012 | - | - | |
051 | WASHER 6,4 DIN 125 FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 00584/53 UP TO ENGINE NO. 65 06043 |
015 | - | - | |
051 | WASHER 6,4 DIN 125 FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 65 06044 |
014 | - | - | |
HEX.-HD. SCREW M 6X18 DIN 933-8 G FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE UP TO ENGINE NO. 00583/53 |
012 | - | - | ||
052 | HEX.-HD. SCREW M 6X22 DIN 933-8 G FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 00584/53 UP TO ENGINE NO. 65 06043 |
015 | - | - | |
052 | HEX.-HD. SCREW M 6X22 DIN 933-8 G FOR TIMING GEAR CASE COVER CYLINDER CRANKCASE FROM ENGINE NO. 65 06044 |
014 | - | - | |
053 | SPACER SLEEVE FROM ENGINE NO. 65 06044 |
001 | A 83 699 104 40 | - | - |
054 | FIXING SCREW WITH TIMING NEEDLE FROM ENGINE NO. 65 06044 |
001 | A 63 601 502 71 | - | - |
VALVE CHAMBER COVER |
- | XXX XXX XXX XXXX | - | - | |
060 | VALVE CHAMBER COVER WITH BREATHER FILTER |
001 | A 18 101 007 18 | - | - |
062 | BREATHER FILTER WITH PIPE CLAMP FROM ENGINE NO. 55 09923 |
001 | A 00 001 803 60 | - | - |
STRAINER UP TO ENGINE NO. 55 09922 |
001 | A 15 901 000 71 | - | - | |
COTTER PIN 2X30 DIN 94 UP TO ENGINE NO. 55 09922 |
001 | - | - | ||
064 | GASKET FOR VALVE CHAMBER COVER |
001 | A 18 101 501 22 | - | $21.69 |
065 | GASKET OPTIONAL FOR VALVE CHAMBER COVER |
004 | A 13 601 100 79 | - | - |
GASKET OPTIONAL FOR VALVE CHAMBER COVER |
004 | A 13 601 101 79 | - | - | |
066 | WASHER 8,4 DIN 125 |
002 | - | - | |
067 | HEX.-HD. SCREW | 002 | A 15 301 500 71 | - | - |
OIL PAN |
- | XXX XXX XXX XXXX | - | - | |
070 | OIL PAN | 001 | A 18 101 020 13 | - | - |
071 | THREADED BUSHING 6/10X13 N 195 A FOR TIMING GEAR CASE COVER AT OIL PAN |
007 | - | - | |
072 | THREADED BUSHING 10/14X13 N 195 A FOR TRANSMISSION FLANGE AT OIL PAN |
003 | - | - | |
073 | SEAL HOLDER HALF FOR OIL SEALING OF CRANKSHAFT |
001 | A 18 103 100 58 | - | - |
075 | SEALING RING C 26X32 DIN 7603 CU-ASB. FOR OIL DRAIN |
001 | - | - | |
076 | SCREW PLUG, GALVANIZED FOR OIL DRAIN |
001 | A 13 699 712 30 | - | - |
077 | WASHER 10,5 DIN 125 FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE |
002 | - | - | |
078 | HEX.-HD. SCREW M 10X75 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE |
002 | - | - | |
079 | WASHER 8,4 DIN 125 FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE |
014 | - | - | |
080 | HEX.-HD. SCREW M 8X22 DIN 933-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE |
013 | - | - | |
081 | HEX.-HD. SCREW M 8X25 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE |
001 | - | - | |
082 | HOLDER FOR RELEASE SPRING |
001 | A 18 107 201 40 | - | - |
083 | HEX.-HD. SCREW M 8X28 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE, AND OF BRACKET FOR BREATHER PIPE UP TO ENGINE NO. 45 003 |
002 | - | - | |
083 | HEX.-HD. SCREW M 8X28 DIN 931-8 G FOR FIXING OF OIL PAN TO CYLINDER CRANKCASE, AND OF BRACKET FOR BREATHER PIPE FROM ENGINE NO. 45 0039 |
001 | - | - | |
CYLINDER HEAD |
- | XXX XXX XXX XXXX | - | - | |
090 | CYLINDER HEAD, COMPRESSION RATIO, 6.7:1 |
001 | A 18 101 012 20 | - | $3.58 |
CYLINDER HEAD, COMPRESSION RATIO, 7.5:1 EXPORT FOR COUNTRIES AT MORE THAN 2,000 M ABOVE SEA-LEVEL |
001 | A 18 101 014 20 | - | - | |
091 | COVER PLATE | 002 | A 18 199 700 25 | - | - |
COVER PLATE, EXTERIOR DIA., 26 H 11 FOR REPAIRS |
002 | A 18 199 701 25 | - | - | |
092 | SEALING RING A 14X18 DIN 7603 A1 FOR SEAL, INSTEAD OF THERMOSTAT |
001 | - | - | |
093 | SCREW PLUG AM 14X1,5 DIN 7604 FOR SEAL, INSTEAD OF THERMOSTAT |
001 | - | - | |
094 | CYLINDER HEAD GASKET OPTIONAL |
001 | A 13 601 604 20 | - | - |
CYLINDER HEAD GASKET OPTIONAL |
001 | A 18 101 607 20 | - | - | |
095 | ADJUSTING RING FOR CYLINDER HEAD AT CYLINDER CRANKCASE |
001 | A 13 601 600 59 | - | $6.71 |
096 | HEX.-HD. SCREW M 12 X 65 FOR CYLINDER HEAD AT CYLINDER CRANKCASE |
013 | A 13 699 004 01 | - | - |
097 | HEX.-HD. SCREW M 10 X 100 FOR CYLINDER HEAD AT CYLINDER CRANKCASE |
002 | A 13 699 006 01 | - | - |
098 | WASHER 10,5 DIN 125 FOR CYLINDER HEAD AT CYLINDER CRANKCASE |
002 | - | - | |
099 | WASHER 13 DIN 125 FOR CYLINDER HEAD AT CYLINDER CRANKCASE |
011 | - | - | |
OIL FILLER |
- | XXX XXX XXX XXXX | - | - | |
100 | OIL FILLER | 001 | A 18 101 010 64 | - | - |
101 | COVER WITH INSCRIPTION | 001 | A 18 101 000 68 | - | - |
102 | SEALING RING | 001 | A 63 601 803 80 | - | $4.53 |
103 | SNAP RING FOR OIL FILLER AT CYLINDER CRANKCASE |
001 | A 15 399 400 40 | - | - |
104 | BREATHER LINE | 001 | A 18 101 001 70 | - | - |
BREATHER LINE EXPORT |
001 | A 18 101 003 70 | - | - | |
PIPE CLAMP FOR BREATHER LINE EXPORT |
001 | A 18 101 802 40 | - | - | |
PIPE CLAMP FOR BREATHER LINE EXPORT |
001 | A 18 101 803 40 | - | - | |
RUBBER HOSE TO CONNECT BREATHER LINE TO OIL-BATH AIR FILTER EXPORT |
001 | A 18 199 705 82 | - | - | |
105 | UNION NUT 10 M 18X1,5 DIN 7606 FOR BREATHER LINE AT OIL FILLER |
001 | - | - | |
106 | FIXING CLAMP | 001 | A 18 199 507 01 | - | - |
107 | HEX.-HD. SCREW M 5X10 DIN 933-8 G FOR FIXING CLAMP AT STAY FOR INTAKE NOISE DAMPER |
001 | - | - | |
108 | LOCK WASHER B 5 DIN 127 FOR FIXING CLAMP AT STAY FOR INTAKE NOISE DAMPER |
001 | - | - | |
109 | HEX. NUT M 5 DIN 934-5 S FOR FIXING CLAMP AT STAY FOR INTAKE NOISE DAMPER |
001 | - | - | |
OIL DIPSTICK |
- | XXX XXX XXX XXXX | - | - | |
110 | OIL DIPSTICK | 001 | A 18 101 002 72 | - | - |
111 | SEALING RING FOR OIL DIPSTICK |
001 | A 13 699 700 41 | - | $0.80 |
- To find out where to buy the item or equivalent, click on the part number.