Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 120.010 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
BATTERY, STARTER CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 001 | LEAD BATTERY 12 V | 001 | A 00 054 146 01 | - | - |
| LEAD BATTERY 12 V SPECIAL REQUEST (TROPICAL DESIGN) |
001 | A 00 054 112 01 | - | - | |
| 002 | FIXING FRAME | 001 | A 12 154 001 23 | - | - |
| 003 | TIGHTENING SCREW FOR FIXING OF BATTERY |
002 | A 12 054 101 24 | - | - |
| LOCK WASHER B 6 DIN 127 FOR FIXING OF BATTERY |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR FIXING OF BATTERY |
002 | - | - | ||
| RUBBER HOSE, 20 MM LONG OVER ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER |
002 | A 00 098 705 32 | - | - | |
| 004 | RUBBER PLUG FOR BLIND HOLE IN FRONT WALL AND SUPPORTING RAIL |
006 | A 00 098 703 15 | - | $0.81 |
| STARTER CABLE FROM POS. POLE TO STARTER MOTOR Replaced by: A 128 540 00 30 |
- | A 18 054 000 30 | - | - | |
| 006 | STARTER CABLE FROM POS. POLE TO STARTER MOTOR |
001 | A 12 854 000 30 | - | - |
| STARTER CABLE FROM POS. POLE TO STARTER MOTOR |
001 | A 12 154 001 30 | - | - | |
| 007 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 13 654 600 35 | - | - |
| 008 | GROUND CABLE FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING |
001 | A 18 054 000 31 | - | - |
| GROUND CABLE FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING |
001 | A 18 054 004 31 | - | - | |
| GROMMET FOR STARTER CABLE THROUGH BRACKET TO FRONT WALL |
001 | A 18 699 704 81 | - | $2.33 | |
| LOCK WASHER B 6 DIN 127 FOR STARTER CABLE THROUGH BRACKET TO FRONT WALL |
001 | - | - | ||
| LENS-HD. SCREW AM 6X8 DIN 7985-4 S FOR STARTER CABLE THROUGH BRACKET AT FRONT WALL |
001 | - | - | ||
| GROMMET FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL |
001 | A 00 099 734 81 | - | $1.11 | |
| 009 | FIXING CLAMP FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY |
001 | A 18 799 500 37 | - | - |
| FIXING CLAMP FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY |
001 | A 18 199 500 20 | - | - | |
| LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY |
001 | - | - | ||
| LENS-HD. SCREW AM 5X10 DIN 7985-4 S FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR CABLE TO STARTER MOTOR AT COWL OR AT MOUNTING CONTROL SHAFT, RESPECTIVELY |
001 | - | - | ||
CABLES |
- | XXX XXX XXX XXXX | - | - | |
| REPLACED BY 120 540 26 05 TOGETHER WITH 1 FUSE BOX 180 540 09 50 UP TO CHASSIS 7503258 |
- | A 12 054 024 05 | - | - | |
| 015 | MAIN CABLE HARNESS FROM CHASSIS 7503259 |
001 | A 12 054 026 05 | - | - |
| MAIN CABLE HARNESS | 001 | A 12 054 027 05 | - | - | |
| 016 | HOUSING, LOWER PART, WITH SOCKET |
001 | A 00 054 506 28 | - | - |
| 017 | GASKET | 001 | A 00 054 500 80 | - | - |
| 018 | CABLE HARNESS | 001 | A 12 154 008 07 | - | - |
| 019 | CABLE HARNESS FROM GENERATOR TO REGULATOR |
001 | A 18 054 000 08 | - | $41.76 |
| 021 | RUBBER PROTECTIVE CAP FOR TERMINAL AT GENERATOR D POS. AND DF |
002 | A 00 054 602 35 | - | - |
| INSULATING HOSE B 16X18 SW 200 1G DIN 40621 OVER MAIN CABLE HAMESS, ROTARY SWITCH ORDER BY THE METER |
001 | - | - | ||
| 023 | CABLE HARNESS FROM 2-POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT |
001 | A 12 054 017 38 | - | - |
| 024 | BRACKET FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH |
001 | A 18 054 600 43 | - | - |
| 025 | GROMMET FOR CABLE HARNESS AT BRACKET |
001 | A 00 099 731 81 | - | $0.98 |
| FIXING CLAMP FOR CABLE OF REV. DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
001 | A 18 199 500 20 | - | - | |
| LENS-HEAD SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE OF REV. DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
001 | - | - | ||
| GROUND CABLE FROM STARTER FLANGE TO FRONT WALL Replaced by: A 186 540 03 41 |
- | A 13 654 004 41 | - | - | |
| 026 | GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
001 | A 18 654 003 41 | - | $97.85 |
| GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
001 | A 12 054 000 41 | - | - | |
| 027 | SCREW WITH LOCKING PLATE FOR GROUND CABLE AT PEDAL FLOOR |
001 | A 12 042 002 27 | - | $7.40 |
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE AT PEDAL FLOOR |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR |
001 | - | - | ||
| 031 | CABLE CONNECTOR, 5-POLE FOR TAIL LIGHT CABLE HARNESS |
002 | A 00 054 619 41 | - | - |
| 032 | CABLE CONNECTOR, 5-POLE FOR STEERING SPINDLE CABLE HARNESS |
001 | A 00 054 606 41 | - | - |
| 033 | CABLE CONNECTOR 2-POLE FOR HEATER BLOWER CONNECTION |
002 | A 00 054 618 41 | - | $48.92 |
| LENS-HEAD SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR 5-POLE CABLE CONNECTOR AT FRONT WALL |
004 | - | - | ||
| LENS-HEAD SHEET METAL SCREW B 3,9X19 DIN 7981 FOR 5-POLE CABLE CONNECTOR AT WHEEL HOUSE, STEERING SPINDLE CABLE HARNESS |
002 | - | - | ||
| LENS-HEAD SHEET METAL SCREW B 3,9X13 DIN 7981 FOR 2-POLE CABLE CONNECTOR AT WHEEL ARCH PAN, LEFT AND RIGHT, HEATER BLOWER |
004 | - | - | ||
| 037 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 18 199 700 81 | - | - |
| 038 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 00 099 727 81 | - | $1.49 |
| 38a | GROMMET FOR BLINKER THROUGH WHEEL ARCH FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
002 | A 00 099 722 81 | - | $0.98 |
| 039 | CLAMP WITH LUG FOR MAIN CABLE HARNESS AT FRONT WALL |
005 | A 00 098 833 78 | - | $0.67 |
| 039 | CLAMP WITH LUG FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 098 833 78 | - | $0.67 |
| 040 | CLAMP WITH LUG FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 098 834 78 | - | $0.36 |
| 040 | CLAMP WITH LUG FOR MAIN CABLE HARNESS AT FRONT WALL |
005 | A 00 098 834 78 | - | $0.36 |
| GROUND CABLE FOR PARKING LIGHT WITH ASYMMETRIC DIMMER LIGHT FROM CHASSIS 7502539 UP TO CHASSIS 7503258 |
002 | A 18 054 030 38 | - | - | |
| 042 | RUBBER SLEEVE FOR FUEL TRANSMITTER CABLE |
001 | A 00 099 717 81 | - | - |
| RUBBER SLEEVE FOR GLOVE BOX |
001 | A 00 099 730 81 | - | $1.79 | |
| CLIP WITH LUG FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN |
008 | A 00 098 833 78 | - | $0.67 | |
| CLIP WITH LUG FOR TAIL LIGHT CABLE HARNESS AT COVER PLATE AND FOR CABLE TO HORN |
005 | A 00 098 834 78 | - | $0.36 | |
| LENS-HD.SHEET METAL SCREW B 4,8X9,5 DIN 7981 F.GROUND CABLE, TRANSMITTER AT REAR CROSS MEMBER |
001 | - | - | ||
| 056 | BRACKET FOR TAIL LIGHT CABLE HARNESS, LEFT AND RIGHT |
008 | A 12 054 601 82 | - | - |
| LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT |
002 | - | - | ||
| LENS-HEAD SCREW AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT |
002 | - | - | ||
| 061 | CABLE COVER PLATE FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
001 | A 12 054 600 81 | - | - |
| LENS-HEAD SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
002 | - | - | ||
| 063 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 500 37 | - | $27.83 |
| LENS-HEAD SCREW AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LENS-HEAD SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| 066 | CAGE CLIP WITH NUT FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 099 022 91 | - | - |
| RUBBER HOSE, DIA 15X17, 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS Replaced by: A 000 997 47 82 |
- | A 18 099 715 82 | - | $3.50 | |
| 067 | RUBBER HOSE, DIA 15X17, 20-MM LONG OVER STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER |
NB | A 00 099 747 82 | - | - |
| 068 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 501 35 | - | - |
| 069 | FIXING CLAMP FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT |
001 | A 18 199 500 20 | - | - |
| LENS-HEAD SHEET METAL SCREW B 4,2X9,5 DIN 7981 FOR STEERING SPINDLE CABLE HARNESS AT FORKED SUPPORT |
001 | - | - | ||
| FIXING CLIP FOR CABLE, STOP SWITCH AT BRAKE FLUID PIPE |
002 | A 00 198 809 78 | - | - | |
| FUSE BOX WITH FUSE AND BRASS SCREW UP TO CHASSIS 7503258 |
001 | A 18 054 003 50 | - | - | |
| FUSE BOX WITH FUSE AND BRASS SCREW AB FGST. 7503259 Replaced by: A 180 540 09 50 |
- | A 12 154 007 50 | - | - | |
| 071 | FUSE BOX WITH FUSE AND BRASS SCREW AB FGST. 7503259 |
001 | A 18 054 009 50 | - | - |
| 072 | COVER FOR FUSE BOX |
001 | A 00 054 502 03 | - | $73.37 |
| FUSE, 12 AMP. 8 DIN 72581 UP TO CHASSIS 7503258 |
012 | - | - | ||
| FUSE, 12 AMP. 8 DIN 72581 FROM CHASSIS 7503259 |
011 | - | - | ||
| FUSE, 35 AMP. 25 DIN 72581 FROM CHASSIS 7503259 |
001 | - | - | ||
| BRACKET, LOWER PART FOR FUSE BOX UP TO CHASSIS 9503080 |
001 | A 12 054 032 73 | - | - | |
| 074 | BRACKET, LOWER PART FOR FUSE BOX FROM CHASSIS 9503081 |
001 | A 12 054 509 40 | - | - |
| 075 | BRACKET, UPPER PART FOR FUSE BOX |
001 | A 18 054 501 40 | - | - |
| LENS-HEAD SCREW AM 6X12 DIN 7985-4 S FOR BRACKET AT COWL |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET AT COWL |
002 | - | - | ||
| LENS-HEAD SHEET METAL SCREW B 3,9 X 19 DIN 7981 FOR FUSE BOX TO BRACKET |
002 | - | - | ||
| SPRING NUT FOR FUSE BOX TO BRACKET |
002 | A 00 099 413 45 | - | $0.67 | |
| LENS-HEAD SCREW AM 5X15 DIN 7985-4 S FOR FUSE BOX AT BRACKET, BOOSTER BRAKE SPECIAL REQUEST FOR INSTALLATION OF ATE BOOSTER BRAKE T 50 |
002 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR FUSE BOX AT BRACKET, BOOSTER BRAKE SPECIAL REQUEST FOR INSTALLATION OF ATE BOOSTER BRAKE T 50 |
002 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR FUSE BOX AT BRACKET, BOOSTER BRAKE SPECIAL REQUEST FOR INSTALLATION OF ATE BOOSTER BRAKE T 50 |
002 | - | - | ||
| 076 | FIXING CLAMP FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | A 18 199 500 20 | - | - |
| LENS-HEAD SCREW AM 4X10 DIN 7985-4 S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| 077 | FIXING CLAMP FOR CABLE TO STOP LIGHT AND FOOT DIMMER SWITCH |
001 | A 15 399 503 22 | - | - |
| LENS-HEAD SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR CABLE TO STOP LIGHT AND FOOT DIMMER SWITCH |
001 | - | - | ||
| 078 | CLAMP FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT AT GUTTER |
002 | A 00 098 888 78 | - | - |
| 079 | FIXING CLAMP FOR MAIN CABLE HARNESS AND BRAKE FLUID PIPE AT FRAME BOTTOM |
002 | A 12 199 500 22 | - | - |
| HEX. HEAD SHEET METAL SCREW B 6,3X16 DIN 7976 |
002 | - | - | ||
INSTRUMENTS AND SWITCHES |
- | XXX XXX XXX XXXX | - | - | |
| PUSH-BUTTON SWITCH FOR INSTRUMENT LIGHTING Replaced by: A 000 545 06 11 |
- | A 12 054 000 44 | - | - | |
| 080 | PUSH-BUTTON SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - | $29.83 |
| 081 | ESCUTCHEON | 001 | A 12 054 500 72 | - | - |
| 082 | FELT RING | 001 | A 00 099 720 40 | - | $0.50 |
| 083 | BUTTON | 001 | A 12 054 502 37 | - | - |
| 084 | COMBI-INSTRUMENT WITH KILOMETER GRADUATION RATIO 0.91, RATIO OF REAR AXLE 1:3,9 |
001 | A 10 554 205 01 | - | - |
| COMBI-INSTRUMENT WITH M.P.H. GRADUATION RATIO 1.47, RATIO OF REAR AXLE 1:3,9 EXPORT |
001 | A 10 554 206 01 | - | - | |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION RATIO 0.96, RATIO OF REAR AXLE 1:4.1 EXPORT FOR MADEIRA AND HONGKONG |
001 | A 12 154 203 01 | - | - | |
| COMBI-INSTRUMENT WITH M.P.H. GRADUATION RATIO 1.54, RATIO OF REAR AXLE 1:4.1 EXPORT FOR MADEIRA AND HONGKONG |
001 | A 12 154 201 01 | - | - | |
| COMBI-INSTRUMENT WITH M.P.H. GRADUATION RATIO 1,36, RATIO OF REAR AXLE 1:3,9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 |
001 | A 10 554 207 01 | - | - | |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION RATIO 0,845, RATIO OF REAR AXLE 1:3,9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 |
001 | A 10 554 208 01 | - | - | |
| 085 | KILOMETER COUNTER RATIO 0.91, RATIO OF REAR AXLE 1:3.9 |
001 | A 00 154 274 06 | - | - |
| KILOMETER COUNTER RATIO 0.96, RATIO OF REAR AXLE 1:4,1 EXPORT FOR MADEIRA AND HONGKONG |
001 | A 00 154 243 06 | - | - | |
| KILOMETER COUNTER RATIO 0.845, RATIO OF REAR AXLE 1:3.9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 |
001 | A 00 154 280 06 | - | - | |
| MILEAGE COUNTER RATIO 1.54, RATIO OF REAR AXLE 1:4,1 EXPORT FOR MADEIRA AND HONGKONG |
001 | A 00 154 242 06 | - | - | |
| MILEAGE COUNTER RATIO 1,47, RATIO OF REAR AXLE 1:3.9 EXPORT |
001 | A 00 154 275 06 | - | - | |
| MILEAGE COUNTER RATIO 1.36, RATIO OF REAR AXLE 1:3,9 EXPORT, SPECIAL REQUEST FOR TIRES 6.40 - 15 |
001 | A 00 154 281 06 | - | - | |
| 086 | OIL PRESSURE GAUGE | 001 | A 00 054 271 02 | - | - |
| 087 | LENGTH OF CAPILLARY TUBE 1,700-MM |
001 | A 00 154 244 05 | - | - |
| 088 | FUEL GAUGE | 001 | A 00 054 244 03 | - | - |
| 089 | TENSION SPRING FOR FIXING OF COMBI-INSTRUMENT |
002 | A 12 093 317 10 | - | - |
| 090 | RUBBER FRAME FOR COMBI-INSTRUMENT |
001 | A 12 054 202 80 | - | - |
| 091 | LAMP SOCKET | 006 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
006 | - | - | ||
| CLIP WITH LUG FOR HOUSING, UPPER PART AND LOWER PART AT GLOVE BOX COVER PLATE |
002 | A 00 098 834 78 | - | $0.36 | |
| 100 | CLOCK WITH MECHANIC DRIVE | 001 | A 12 054 203 11 | - | - |
| 101 | LAMP SOCKET | 001 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
001 | - | - | ||
| 109 | DIMMING RESISTOR FOR INSTRUMENT LIGHTING |
001 | A 00 054 508 31 | - | - |
| 110 | PUSH - BUTTON STARTING SWITCH |
001 | A 00 054 517 14 | - | - |
| 111 | ESCUTCHEON FOR PUSH - BUTTON STARTING SWITCH |
001 | A 12 054 503 72 | - | - |
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 |
001 | A 18 054 006 60 | - | - | |
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503718 |
001 | A 18 054 003 60 | - | - | |
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 |
001 | A 18 054 008 60 | - | - | |
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503718 |
001 | A 18 054 009 60 | - | - | |
| 123 | OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE FROM CHASSIS 9503081 |
001 | A 18 054 013 60 | - | - |
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO CONNECTING PIECE FROM CHASSIS 9503719 |
001 | A 12 054 005 60 | - | - | |
| CONNECTING NIPPLE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503719 |
001 | A 12 854 200 47 | - | - | |
| OIL PRESSURE GAUGE PIPE FROM CONNECTING PIECE TO HOSE FROM CHASSIS 9503719 |
001 | A 12 054 006 60 | - | - | |
| HOSE PIECE DIA. 15 X 17, 20-MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE Replaced by: A 000 997 47 82 |
- | A 12 099 708 82 | - | - | |
| HOSE PIECE DIA. 15 X 17, 20-MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 |
001 | A 00 099 747 82 | - | - | |
| HOSE PIECE DIA. 15 X 17, 20-MM LONG ORDER BY THE METER FOR BOX NUT TO OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 |
001 | A 00 099 747 82 | - | - | |
| LOCK WASHER B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503718 |
001 | - | - | ||
| HEX. NUT M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503080 |
001 | - | - | ||
| HEX. NUT M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE AT FRONT WALL AND WHEEL ARCH STRUT UP TO CHASSIS 9503718 |
001 | - | - | ||
| SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503081 |
002 | - | - | ||
| SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503719 |
002 | - | - | ||
| HEX. NUT BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503081 |
001 | - | - | ||
| HEX. NUT BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET FROM CHASSIS 9503719 |
001 | - | - | ||
| 127 | RUBBER HOSE 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | A 00 098 709 32 | - | $6.65 |
| 128 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | A 13 699 505 01 | - | - |
| LENS-HEAD SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | - | - | ||
| FIXING CLAMP FOR CAPILLARY TUBE AT FRONT WALL |
001 | A 13 699 505 01 | - | - | |
| LENS-HEAD SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR CAPILLARY TUBE AT FRONT WALL |
001 | - | - | ||
| HOSE FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503080 |
001 | A 12 154 000 59 | - | - | |
| HOSE FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9503718 |
001 | A 12 154 000 59 | - | - | |
| 130 | HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503081 |
001 | A 12 854 000 59 | - | $43.69 |
| HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9503719 |
001 | A 12 154 002 59 | - | $84.01 | |
| 131 | STOP LIGHT SWITCH ALSO SEE GROUP 42 |
001 | A 00 054 522 09 | - | - |
| 132 | FOOT DIMMER SWITCH | 001 | A 00 054 504 12 | - | - |
| 132a | REVERSING SWITCH FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) |
001 | A 00 054 591 24 | - | - |
| BLINKER LEVER KNOB, BLACK FOR REVERSING SWITCH SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) Replaced by: A 180 545 02 37 |
- | A 18 054 500 37 | - | - | |
| 132b | BLINKER LEVER KNOB, BLACK FOR REVERSING SWITCH SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) |
001 | A 18 054 502 37 | - | - |
| CABLE HARNESS FOR TURN-INDICATOR BLINKER SPECIAL REQUEST (TURN-INDICATOR BLINKER LIGHTS WITH AUTOMATIC CUTOUT FOR USA) |
001 | A 18 054 016 09 | - | - | |
| 133 | INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 13 654 501 58 | - | - |
| LENS-HEAD COUNTERSUNK SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | - | ||
| 135 | CAGE CLAMP WITH NUT FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | A 00 099 025 91 | - | - |
| GROMMET FOR CABLE TO FOOT DIMMER SWITCH |
001 | A 00 099 727 81 | - | $1.49 | |
| FLEXIBLE DRIVE SHAFT, 1,750-MM LONG Replaced by: A 120 542 03 07 |
- | A 12 054 204 07 | - | - | |
| 137 | FLEXIBLE DRIVE SHAFT, 1,750-MM LONG |
001 | A 12 054 203 07 | - | - |
| GROMMET FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL Replaced by: A 186 997 04 81 |
- | A 18 399 701 81 | - | $6.44 | |
| GROMMET FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 18 699 704 81 | - | $2.33 | |
| GROMMET FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 00 099 731 81 | - | $0.98 | |
| CLAMP FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT |
002 | A 00 098 834 78 | - | $0.36 | |
| CLAMP FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT |
001 | A 00 098 834 78 | - | $0.36 | |
| 139 | FIXING CLAMP FOR TACHOMETER SHAFT AT BEARING, CONTROL SHAFT |
001 | A 12 099 500 01 | - | - |
| LENS HEAD SCREW AM 5X10 DIN 7985-4 S FOR TACHOMETER SHAFT AT BEARING, CONTROL SHAFT |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR TACHOMETER SHAFT AT BEARING, CONTROL SHAFT |
001 | - | - | ||
| 142 | GROMMET FOR TACHOMETER SHAFT THROUGH FORKED SUPPORT |
002 | A 18 099 712 81 | - | - |
| 143 | GROMMET TO SEAL 3 RD PASSAGE OF FORKED SUPPORT |
001 | A 18 098 700 44 | - | - |
| 144 | THREE-ELEMENT VOLTAGE | 001 | A 00 015 455 06 | - | - |
| 145 | GROMMET WITH | 003 | A 00 015 402 50 | - | - |
| LOCK WASHER B 6 DIN 127 TO FIX REGULATOR TO BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| LENS HEAD SCREW AM 6X20 DIN 7985-4 S TO FIX REGULATOR TO BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| 148 | GROMMET FOR CABLE FROM VOLTAGE REGULATOR TO GENERATOR |
003 | A 00 099 707 81 | - | $1.35 |
| ADDITIONAL CABLE HARNESS SPECIAL REQUEST FOR LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA |
001 | A 12 154 017 09 | - | - | |
| INSULATING HOSE B 20X22,4 SW 100 MM DIN 40621 OVER MAIN CABLE HARNESS, LIGHT TURNING SWITCH, ORDER BY THE METER SPECIAL REQUEST FOR LIGH |
001 | - | - | ||
| ADDITIONAL FUSE BOX, 2-POLE AT FRONT WALL SPECIAL REQUEST FOR LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA |
001 | A 00 054 503 01 | - | - | |
| CYLINDRICAL SCREW AM 4X15 DIN 84 FOR FUSE BOX AT FRESH-AIR DUCT SPECIAL REQUEST FOR LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA |
001 | - | - | ||
| REPLACED BY 001542 20 20 | - | A 00 054 273 20 | - | - | |
| REPLACED BY 001542 20 20 | - | A 00 054 244 20 | - | - | |
| REPLACED BY 001542 20 20 | - | A 00 154 207 20 | - | - | |
| 150 | HORN | 001 | A 00 154 220 20 | - | - |
| HORN SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 054 271 20 | - | - | |
| HORN Replaced by: A 001 542 08 20 |
- | A 00 054 245 20 | - | - | |
| HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 00 154 208 20 | - | - | |
| HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 00 054 246 20 | - | - | |
| HEX. HEAD SCREW M 10X28 DIN 931-8 G FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| 152 | HEX. HEAD SCREW M 10X28 DIN 931-8 G FOR HORN AT BRACKET |
001 | - | - | |
| 153 | LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET |
001 | - | - | |
| 154 | HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET |
001 | - | - | |
| BRACKET FOR HORN AT CROSS TUBE, FRONT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 10 120 612 00 31 | - | - | |
| BRACKET FOR HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 054 204 40 | - | - | |
| HEX. HEAD SCREW M 6X15 DIN 933-8 G FOR BRACKET AT LEFT WHEEL HOUSE SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET AT LEFT WHEEL ARCH PAN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR BRACKET AT LEFT WHEEL ARCH PAN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR BRACKET AT LEFT WHEEL ARCH PAN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
004 | - | - | ||
| CYLINDRICAL SCREW AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN |
002 | - | - | ||
| CYLINDRICAL SCREW AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN |
002 | - | - | ||
| 160 | IGNITION COIL | 001 | A 00 015 800 03 | - | - |
| 161 | FIXING CLAMP FOR IGNITION COIL |
001 | A 00 015 802 40 | - | - |
| CYLINDRICAL SCREW BM 5X40 DIN 84-4 S |
001 | - | - | ||
| SQUARE NUT M 5 DIN 562 |
001 | - | - | ||
| HEX. HEAD SCREW M 6X12 DIN 933-8 G FOR IGNITION COIL AT WHEEL ARCH PAN |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT WHEEL ARCH PAN |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT WHEEL ARCH PAN |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR IGNITION COIL AT WHEEL ARCH PAN |
002 | - | - | ||
| 167 | RUBBER PROTECTIVE CAP FOR IGNITION COIL |
002 | A 00 054 602 35 | - | - |
| CONTACTOR SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM Replaced by: A 000 542 27 19 |
- | A 00 054 215 19 | - | - | |
| CONTACTOR SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 00 054 227 19 | - | - | |
| PUSH - BUTTON SWITCH FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 000 44 | - | - | |
| ESCUTCHEON SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 13 654 506 72 | - | $12.73 | |
| FELT RING SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 00 099 720 40 | - | $0.50 | |
| BUTTON SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 13 630 209 01 | - | - | |
| ADDITIONAL CABLE HARNESS SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 006 09 | - | - | |
| ADDITIONAL CABLE HARNESS FROM 2ND TO 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 005 09 | - | - | |
| ELECTRICAL CABLE FROM FUSE BOX TO RELAY TERMINAL 30/51 SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 001 38 | - | - | |
| ELECTRICAL CABLE FROM RELAY TERMINAL 87 TO 2ND HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 002 38 | - | - | |
| GROUND CABLE FROM 2ND HORN TO GROUND SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 003 38 | - | - | |
| SOCKET FOR HAND LIGHT SPECIAL REQUEST |
001 | A 00 054 513 25 | - | - | |
| ELECTRICAL CABLE, BLACK 1,000-MM LONG A 1 DIN 72551 ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| INSULATING HOSE, BLACK 950-MM LONG B 3X3,8 DIN 40621 ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| CYLINDRICAL SCREW AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - | ||
| LOCK WASHER B 5,3 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - |
- To find out where to buy the item or equivalent, click on the part number.