Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 120.011 - REAR AXLE Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
№- | Name | A* | Part number | A | Part number, Price per Unit., $ |
REAR AXLE TUBE |
- | XXX XXX XXX XXXX | - | - | |
045 | REAR AXLE TUBE, LEFT, WITH THRUST ARM SUPPORT AND SCREW PLUG |
001 | A 18 035 044 19 | - | - |
REAR AXLE TUBE, RIGHT, WITH THRUST ARM SUPPORT Replaced by: A 180 350 39 19 |
- | A 18 035 045 19 | - | - | |
046 | REAR AXLE TUBE, RIGHT, WITH THRUST ARM SUPPORT |
001 | A 18 035 039 19 | - | $188.75 |
047 | BUSHING FOR REAR AXLE TUBE, RIGHT |
002 | A 18 035 101 50 | - | $28.04 |
47a | CONICAL PLUG ASM 10X1 N 87 FOR REAR AXLE TUBE, RIGHT VALID ONLY FOR REAR AXLE TUBE 180 350 45 19 |
001 | - | - | |
048 | SCREW PLUG AT REAR AXLE TUBE, LEFT ONLY VALID FOR REAR AXLE TUBE 180 350 44 19 |
001 | A 18 699 700 32 | - | - |
049 | BREATHER FOR REAR AXLE TUBE |
001 | A 18 035 002 90 | - | - |
UNIVERSAL JOINT, SLIDING |
- | XXX XXX XXX XXXX | - | - | |
053 | UNIVERSAL JOINT, SLIDING, BEDDED IN NEEDLES |
001 | A 18 035 005 13 | - | $569.92 |
054 | WASHER IN YOKE |
001 | A 18 835 700 52 | - | $1.61 |
54a | WASHER IN YOKE |
001 | A 18 035 701 52 | - | $13.63 |
055 | CIRCLIP 48X1,75 DIN 472 IN YOKE UP TO REAR AXLE 8505559 |
002 | - | - | |
055 | CIRCLIP 48X1,75 DIN 472 IN YOKE FROM REAR AXLE 8505560 |
001 | - | - | |
55a | CIRCLIP IN YOKE FROM REAR AXLE 8505560 |
001 | A 00 099 429 41 | - | $3.58 |
056 | UNIVERSAL CROSS | 001 | A 18 035 700 13 | - | - |
057 | NEEDLE BEARING BUSHING | 004 | A 12 035 701 14 | - | - |
REPLACED BY 2,5X11,8 II DIN 5402 2,5 Ø X 11,8 DIN 617 |
- | - | - | ||
058 | NEEDLE 2,5X11,8 II DIN 5402 FOR SLIDING SLEEVE |
100 | - | - | |
059 | SNAP RING, 2.25 MM THICK OPTIONAL |
NB | A 12 099 401 35 | - | - |
SNAP RING, 2.35 MM THICK OPTIONAL |
NB | A 12 099 404 35 | - | - | |
SNAP RING, 2.40 MM THICK OPTIONAL |
NB | A 12 099 406 35 | - | - | |
SNAP RING, 2.45 MM THICK OPTIONAL |
NB | A 12 099 407 35 | - | $1.66 | |
SNAP RING, 2.55 MM THICK OPTIONAL |
NB | A 12 099 408 35 | - | - | |
060 | SLIDING SLEEVE WITH GUIDE PLATE |
001 | A 18 035 007 13 | - | $859.51 |
061 | CIRCLIP 32X1,5 DIN 471 |
002 | - | - | |
062 | CYLINDER ROLLER 4 X 4 | 132 | A 18 098 100 86 | - | $0.58 |
063 | RUBBER SLEEVE | 001 | A 18 035 705 91 | - | - |
064 | TIGHTENING SCREW, INNER FOR YOKE |
001 | A 18 035 300 76 | - | - |
065 | LOCK WASHER B 10 DIN 127 |
001 | - | - | |
066 | SHIM, 1.00 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 330 52 | - | - |
SHIM, 1.10 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 331 52 | - | - | |
SHIM, 1.20 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 333 52 | - | - | |
SHIM, 1.30 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 335 52 | - | $33.59 | |
SHIM, 1.40 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 337 52 | - | $33.59 | |
SHIM, 1.50 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 339 52 | - | $33.59 | |
SHIM, 1.60 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 341 52 | - | $40.89 | |
SHIM, 1.70 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 343 52 | - | - | |
SHIM, 1.80 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 345 52 | - | - | |
SHIM, 1.90 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 347 52 | - | - | |
SHIM, 2.00 MM THICK OPTIONAL FOR YOKE, INNER |
001 | A 18 035 349 52 | - | - | |
REAR AXLE SHAFT |
- | XXX XXX XXX XXXX | - | - | |
070 | REAR AXLE SHAFT, LEFT | 001 | A 18 035 013 10 | - | - |
071 | WHEEL FIXING PIN | 005 | A 12 040 101 71 | - | $20.43 |
072 | REAR AXLE SHAFT, RIGHT | 001 | A 18 035 014 10 | - | - |
073 | WHEEL FIXING PIN | 005 | A 12 040 101 71 | - | $20.43 |
ANNULAR GROOVED BEARING FOR REAR AXLE SHAFT Replaced by: A 183 981 00 25 |
- | A 18 098 100 25 | - | - | |
074 | ANNULAR GROOVED BEARING FOR REAR AXLE SHAFT |
002 | A 18 398 100 25 | - | - |
075 | LOCKING PLATE FOR REAR AXLE SHAFT |
002 | A 18 335 303 73 | - | $15.13 |
076 | GROOVED NUT FOR REAR AXLE SHAFT |
002 | A 15 335 700 26 | - | $8.95 |
077 | HEX.-HD. SCREW M 10X22 DIN 933 - 8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING |
004 | - | - | |
078 | HEX.-HD.SCREW M 7X22 DIN 933 - 8 G FOR REAR AXLE TUBE AT REAR AXLE HOUSING |
004 | - | - | |
079 | HOSE CLAMP S 9 N 262 |
002 | - | - | |
080 | HOSE STRAP 9 X 0,4 N 263 ORDER BY THE METER |
NB | - | - | |
081 | BRAKE DRUM | 002 | A 12 042 106 01 | - | $149.16 |
SPHERICAL COLLAR NUT FOR BRAKE DRUM AT WHEEL BOLT, REAR AXLE SHAFT Replaced by: A 110 990 00 59 |
- | A 12 099 000 59 | - | $8.19 | |
082 | SPHERICAL COLLAR NUT FOR BRAKE DRUM AT WHEEL BOLT, REAR AXLE SHAFT SEE ALSO GROUP 33 AND 40 |
004 | A 11 099 000 59 | - | - |
REAR AXLE SUSPENSION |
- | XXX XXX XXX XXXX | - | - | |
085 | CONNECTION PIN FOR REAR AXLE SUSPENSION |
001 | A 18 035 106 74 | - | $165.29 |
086 | SLEEVE, 26.0 MM LONG OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN |
002 | A 18 035 101 53 | - | $70.88 |
SLEEVE, 25.8 MM LONG OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS |
002 | A 18 035 118 53 | - | $70.88 | |
SLEEVE, 25.6 MM LONG OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS |
002 | A 18 035 117 53 | - | $70.88 | |
SLEEVE, 25.4 MM LONG OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS |
002 | A 18 035 116 53 | - | $70.88 | |
SLEEVE, 25.2 MM LONG OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS |
002 | A 18 035 115 53 | - | $70.88 | |
SLEEVE, 25.00 MM LONG OPTIONAL BETWEEN REAR AXLE TUBE MOUNTING AND CONNECTION PIN REPAIRS |
002 | A 18 035 114 53 | - | $70.88 | |
087 | WASHER, 2.00 MM THICK FOR REAR AXLE TUBE, OUTSIDE |
002 | A 18 035 114 52 | - | $35.03 |
088 | SHIM, 1.90 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE |
002 | A 18 035 113 52 | - | $32.22 |
SHIM, 2.00 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE |
002 | A 18 035 114 52 | - | $35.03 | |
SHIM, 2.10 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE |
002 | A 18 035 115 52 | - | $51.12 | |
SHIM, 2.20 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE |
002 | A 18 035 116 52 | - | $34.08 | |
SHIM, 2.30 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 117 52 | - | $34.08 | |
SHIM, 2.40 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 118 52 | - | $51.12 | |
SHIM, 2.50 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 119 52 | - | $37.97 | |
SHIM, 2.60 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 127 52 | - | $40.89 | |
SHIM, 2.70 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 128 52 | - | $33.59 | |
SHIM, 2.80 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 129 52 | - | $44.31 | |
SHIM, 2.90 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 130 52 | - | $34.81 | |
SHIM, 3.00 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 120 52 | - | $34.81 | |
SHIM, 3.10 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 131 52 | - | $34.81 | |
SHIM, 3.20 MM THICK OPTIONAL BETWEEN REAR AXLE TUBE AND REAR AXLE HOUSING INSIDE REPAIRS |
002 | A 18 035 132 52 | - | $44.31 | |
089 | SHIM ON CONNECTION PIN AT REAR AXLE TUBE MOUNTING, OUTSIDE |
002 | A 18 035 103 51 | - | $16.68 |
090 | RUBBER RING ON SHIMS |
004 | A 18 035 109 86 | - | $2.96 |
091 | WEDGE FOR CONNECTION PIN AT REAR AXLE HOUSING |
001 | A 18 035 100 74 | - | $23.97 |
092 | LOCK WASHER B 8 DIN 127 FOR CONNECTION PIN AT REAR AXLE HOUSING |
001 | - | - | |
093 | HEX.NUT M 8 DIN 934-5 S FOR CONNECTION PIN AT REAR AXLE HOUSING |
001 | - | - | |
094 | CIRCLIP IN CONNECTION PIN |
001 | A 18 099 403 41 | - | $2.41 |
095 | COVER 20 DIN 443 IN CONNECTION PIN |
001 | - | - | |
096 | SPACER SLEEVE ON CONNECTION PIN, FRONT |
001 | A 18 035 111 53 | - | $73.00 |
097 | LOCKING PLATE FOR CONNECTION PIN AT SILENT BLOC IN SUPPORT |
001 | A 18 099 401 12 | - | $3.41 |
098 | HEX.-HD.SCREW FOR CONNECTION PIN AT SILENT BLOC IN SUPPORT |
001 | A 18 099 704 30 | - | $12.34 |
099 | GREASE FITTING A 6 DIN 71412 IN REAR EYE FOR REAR AXLE TUBE, RIGHT |
001 | - | - | |
GREASE FITTING IN FRONT EYE FOR REAR AXLE TUBE, RIGHT Replaced by: A 000 997 11 88 |
- | A 00 099 708 88 | - | - | |
99a | GREASE FITTING IN FRONT EYE FOR REAR AXLE TUBE, RIGHT |
001 | A 00 099 711 88 | - | - |
RUBBER MOUNTING IN SUPPORT, REAR AXLE SUSPENSION Replaced by: A 111 350 02 75 |
- | A 18 035 009 75 | - | - | |
100 | RUBBER MOUNTING IN SUPPORT, REAR AXLE SUSPENSION |
001 | A 11 135 002 75 | - | $109.34 |
SUPPORT WITH RETAINER FOR REAR AXLE SUSPENSION Replaced by: A 180 350 09 32 |
- | A 18 035 008 32 | - | - | |
101 | SUPPORT WITH RETAINER FOR REAR AXLE SUSPENSION |
001 | A 18 035 009 32 | - | - |
102 | LOCK WASHER B 10 DIN 127 FOR RUBBER MOUNTING IN SUPPORT |
002 | - | - | |
103 | HEX.-HD.SCREW M 10X35 DIN 931-8 G FOR RUBBER MOUNTING IN SUPPORT |
002 | - | - | |
104 | THRUST ARM, LEFT FOR REAR AXLE |
001 | A 18 035 000 29 | - | $359.25 |
105 | THRUST ARM, RIGHT FOR REAR AXLE |
001 | A 18 035 001 29 | - | $359.25 |
106 | CYLINDRICAL SCREW FOR MOUNTING SHOCK ABSORBER |
004 | A 12 099 009 20 | - | $14.95 |
107 | CYLINDRICAL SCREW FOR MOUNTING SHOCK ABSORBER |
004 | A 12 099 010 20 | - | $14.32 |
110 | RUBBER MOUNTING FOR THRUST ARM, REAR FOR THRUST ARM AT REAR AXLE TUBE |
002 | A 12 035 207 65 | - | $11.88 |
111 | WASHER FOR RUBBER MOUNTING, WHEEL SIDE FOR THRUST ARM AT REAR AXLE TUBE |
002 | A 12 035 205 76 | - | - |
112 | WASHER FOR RUBBER MOUNTING, SCREW SIDE FOR THRUST ARM AT REAR AXLE TUBE |
002 | A 12 035 206 76 | - | - |
113 | LOCKING PLATE FOR THRUST ARM AT REAR AXLE TUBE |
002 | A 12 099 404 12 | - | $6.57 |
114 | HEX.-HD.SCREW FOR THRUST ARM AT REAR AXLE TUBE |
002 | A 12 099 000 01 | - | $10.56 |
RUBBER MOUNTING, TOP FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR Replaced by: A 121 351 01 86 |
- | A 12 135 100 48 | - | - | |
115 | RUBBER MOUNTING, TOP FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR |
001 | A 12 135 101 86 | - | - |
WASHER FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR Replaced by: A 128 350 00 67 |
- | A 18 035 001 67 | - | - | |
116 | WASHER FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR |
001 | A 12 835 000 67 | - | - |
117 | LOCKING PLATE FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR |
001 | A 18 035 103 73 | - | $0.30 |
118 | HEX.NUT M 22X1,5 DIN 936-5 S FOR REAR AXLE SUSPENSION, TOP AT BODY FLOOR |
001 | - | - | |
120 | RUBBER RING, BOTTOM FOR REAR AXLE SUSPENSION, BOTTOM AT BODY FLOOR |
001 | A 18 035 105 86 | - | $48.48 |
121 | CROSS ARM FOR REAR AXLE SUSPENSION AT BODY FLOOR |
001 | A 18 035 101 96 | - | - |
122 | SHACKLE OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR |
001 | A 18 035 105 40 | - | - |
SHACKLE OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR |
001 | A 18 035 114 40 | - | - | |
123 | SHACKLE OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR |
001 | A 18 035 104 40 | - | - |
SHACKLE OPTIONAL FOR CROSS STRUT FOR REAR AXLE SUSPENSION AT BODY FLOOR |
001 | A 18 035 113 40 | - | - | |
124 | HEX.-HD.SCREW M 12 X 1,5 X 25 DIN 961 - 8 G FOR SHACKLE AT CROSS STRUT |
001 | - | - | |
125 | LOCK WASHER B 12 DIN 127 FOR SHACKLE AT CROSS STRUT |
001 | - | - | |
126 | HEX.NUT M 12X1,5 DIN 934-5 S FOR SHACKLE AT CROSS STRUT |
001 | - | - | |
127 | HEX.-HD.SCREW M 12 X 1,5 X 35 DIN 960 - 8 G FOR CROSS STRUT AT SUPPORT |
001 | - | - | |
128 | LOCK WASHER B 12 DIN 127 FOR CROSS STRUT AT SUPPORT |
001 | - | - | |
129 | RUBBER MOUNTING FOR CROSS STRUT AT SUPPORT |
001 | A 18 035 100 48 | - | $29.20 |
130 | WASHER FOR CROSS STRUT |
001 | A 18 035 100 76 | - | - |
131 | SPACER TUBE FOR CROSS STRUT |
001 | A 18 035 106 53 | - | - |
132 | RUBBER BUFFER | 002 | A 18 035 107 44 | - | $35.80 |
133 | CUP FOR CROSS STRUT |
002 | A 18 035 103 43 | - | $35.42 |
134 | LOCK WASHER B 12 DIN 127 FOR CUP, RUBBER BUFFER AT CROSS STRUT |
001 | - | - | |
135 | HEX.NUT M 12 X 1,5 DIN 934-5 S FOR CUP, RUBBER BUFFER AT CROSS STRUT |
001 | - | - | |
RUBBER MOUNTING FOR THRUST ARM AT BODY, FLOOR Replaced by: A 111 352 00 65 |
- | A 18 035 200 65 | - | - | |
136 | RUBBER MOUNTING FOR THRUST ARM, FRONT FOR THRUST ARM AT BODY, FLOOR |
002 | A 11 135 200 65 | - | $36.72 |
137 | RETAINER FOR RUBBER MOUNTING FOR THRUST ARM AT BODY, FLOOR |
002 | A 18 035 201 67 | - | - |
CASTLE COLLAR NUT FOR THRUST ARM AT BODY, FLOOR Replaced by: A 180 352 03 72 |
- | A 18 035 202 72 | - | - | |
138 | CASTLE COLLAR NUT FOR THRUST ARM AT BODY, FLOOR |
002 | A 18 035 203 72 | - | $10.73 |
139 | COTTER PIN 3X28 DIN 94 FOR THRUST ARM AT BODY, FLOOR |
002 | - | - |
- To find out where to buy the item or equivalent, click on the part number.