Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 120.011 - LINING AND COVERING Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
ANTISQUEAK |
- | XXX XXX XXX XXXX | - | - | |
Replaced by: A 000 983 30 91 |
- | A 12 068 200 04 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 12 068 201 04 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 12 068 202 04 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 12 068 203 04 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 12 068 204 04 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 120 682 01 01 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 120 682 02 01 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 120 682 01 02 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 180 682 01 06 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 180 682 00 07 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 120 682 00 05 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 120 682 00 09 | - | - | |
Replaced by: A 000 983 30 91 |
- | A 10 120 682 01 09 | - | - | |
| ANTISQUEAK BITUMINIZED FELT CARD BOARD 5 MM THICK Replaced by: A 000 983 30 91 |
- | A 10 120 682 02 09 | - | - | |
| ANTISQUEAK BITUMINIZED FELT CARD BOARD 5 MM THICK |
- | A 00 098 330 91 | - | $11.96 | |
| FOR PEDAL FLOOR, LEFT, 406X470-MM |
001 | - | - | ||
| FOR PEDAL FLOOR, RIGHT, 408X777-MM |
001 | - | - | ||
| FOR PEDAL FLOOR, RIGHT, 408X470-MM |
001 | - | - | ||
| FOR PEDAL FLOOR, CENTER, 102X236-MM |
001 | - | - | ||
| FOR DRIVER'S FLOOR, FRONT, 195X440-MM |
002 | - | - | ||
| FOR DRIVER'S FLOOR, REAR, 320X565-MM |
002 | - | - | ||
| FOR TUNNEL, FRONT, 537X616-MM |
001 | A 00 098 330 91 | - | $11.96 | |
| FOR CENTER TUNNEL BEHIND TRANSMISSION COVER PLATE, 218X238-MM |
001 | - | - | ||
| FOR REAR TUNNEL, 370X490-MM |
001 | - | - | ||
| BELOW REAR SEAT LEFT AND RIGHT, 470X554-MM |
002 | - | - | ||
| FOR CENTER TUNNEL BELOW REAR SEAT, 50X200-MM |
002 | - | - | ||
| FOR STIFFENING CORRUGATIONS IN MAIN FLOOR, 80X375-MM |
006 | - | - | ||
Replaced by: A 000 983 22 92 |
- | A 12 068 201 12 | - | - | |
Replaced by: A 000 983 22 92 |
- | A 12 068 202 12 | - | - | |
Replaced by: A 000 983 22 92 |
- | A 12 068 203 12 | - | - | |
Replaced by: A 000 983 22 92 |
- | A 10 120 682 07 12 | - | - | |
| ANTISQUEAK WAFFLE FELT 10 MM THICK Replaced by: A 000 983 22 92 |
- | A 10 180 682 01 13 | - | - | |
| ANTISQUEAK WAFFLE FELT 10 MM THICK |
- | A 00 098 322 92 | - | $149.52 | |
| FOR PEDAL FLOOR, LEFT, 380X585-MM |
001 | - | - | ||
| FOR PEDAL FLOOR, RIGHT, 396X585-MM |
001 | - | - | ||
| FOR TUNNEL, FRONT, 656X720-MM |
001 | - | - | ||
Replaced by: A 000 983 29 91 |
- | A 12 068 200 16 | - | - | |
Replaced by: A 000 983 29 91 |
- | A 10 120 682 00 08 | - | - | |
Replaced by: A 000 983 29 91 |
- | A 10 120 682 00 41 | - | - | |
| ANTISQUEAK BITUMINIZED FELT CARD BOARD, 3 MM THICK Replaced by: A 000 983 29 91 |
- | A 10 120 682 02 41 | - | - | |
| ANTISQUEAK BITUMINIZED FELT CARD BOARD, 3 MM THICK |
- | A 00 098 329 91 | - | $8.48 | |
| FOR REAR | 002 | - | - | ||
| FOR SEAT FRAME, CENTER, 98X375-MM |
001 | - | - | ||
| FOR STIFFENING CORRUGATIONS IN LUGGAGE COMPARTMENT REAR, 105X105-MM |
003 | - | - | ||
| FOR STIFFENING CORRUGATIONS IN LUGGAGE COMPARTMENT, REAR, LEFT, 55X135-MM |
001 | - | - | ||
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 10 120 680 01 25 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 10 120 680 03 25 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 10 120 680 02 25 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 10 120 680 04 25 | - | - | |
| ANTISQUEAK BITUMINIZED FELT CARD BOARD, 2 MM THICK FOR INSTRUMENT PANEL, TOP, LEFT AND RIGHT |
002 | A 00 098 322 91 | - | - | |
| ANTISQUEAK WAFFLE FELT, 10 MM THICK FOR INSTRUMENT PANEL, TOP, LEFT AND RIGHT |
002 | A 00 098 322 92 | - | $149.52 | |
| 001 | ANTISQUEAK FOR GLOVE BOX, LEFT |
001 | A 10 120 680 11 28 | - | - |
| 002 | ANTISQUEAK FOR GLOVE BIX, RIGHT |
001 | A 10 120 680 13 28 | - | - |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 01 98 |
- | A 10 120 680 14 28 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 01 98 |
- | A 10 120 680 12 28 | - | - | |
| ANTISQUEAK BITUMINIZED FELT CARD BOARD, 2 MM THICK FOR GLOVE BOX, LEFT AND RIGHT |
002 | A 00 098 322 91 | - | - | |
| ANTISQUEAK MOLTOPREN, 10 MM THICK FOR GLOVE BOX, LEFT AND RIGHT |
002 | A 00 098 301 98 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 12 068 001 25 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 12 068 002 25 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 12 068 003 25 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 2 ANTISQUEAK 000 983 22 92 |
- | A 12 068 004 25 | - | - | |
| ANTISQUEAK BITUMINIZED FELT CARD BOARD, 2 MM THICK FOR FRONT WALL, UPPER PART BELOW INSTRUMENT PANEL |
002 | A 00 098 322 91 | - | - | |
| ANTISQUEAK WAFFLE FELT, 10 MM THICK FOR FRONT WALL, UPPER PART BELOW INSTRUMENT PANEL |
002 | A 00 098 322 92 | - | $149.52 | |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 3,5X16 DIN 7983 DBL 8451-21 ANTISQUEAK TO FRONT WALL, UPPER PART |
001 | N 007983 003249 | - | - | |
| COUNTERSUNK SHEET METAL WASHER ANTISQUEAK TO FRONT WALL, UPPER PART |
001 | A 00 098 512 62 | - | - | |
| 010 | ANTISQUEAK, BODY FRONT END, LEFT IN ENGINE SPACE |
001 | A 10 120 680 19 29 | - | - |
| ANTISQUEAK, BODY FRONT END, RIGHT IN ENGINE SPACE |
001 | A 10 120 680 18 29 | - | - | |
| REPLACED BY 120 680 03 29 IN ENGINE SPACE Replaced by: A 120 680 03 29 |
- | A 10 180 680 23 29 | - | - | |
| ANTISQUEAK, BODY FRONT END, RIGHT IN ENGINE SPACE Replaced by: A 120 680 03 29 |
- | A 11 120 680 21 29 | - | - | |
| 011 | ANTISQUEAK, BODY FRONT END, RIGHT IN ENGINE SPACE |
001 | A 12 068 003 29 | - | - |
| REPLACED BY 120 680 04 29 IN ENGINE SPACE Replaced by: A 120 680 04 29 |
- | A 10 180 680 24 29 | - | - | |
| ANTISQUEAK, BODY FRONT END, LEFT IN ENGINE SPACE Replaced by: A 120 680 04 29 |
- | A 11 120 680 20 29 | - | - | |
| ANTISQUEAK, BODY FRONT END, LEFT IN ENGINE SPACE |
001 | A 12 068 004 29 | - | - | |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 3,5X16 DIN 7983 DBL 8451-21 ANTISQUEAK AT BODY FRONT END, LEFT AND RIGHT |
007 | N 007983 003249 | - | - | |
| COUNTERSUNK SHEET METAL WASHER ANTISQUEAK AT BODY FRONT END, LEFT AND RIGHT |
007 | A 00 098 512 62 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 1 ANTISQUEAK, TOP 000 983 01 98 |
- | A 10 120 680 14 29 | - | - | |
| REPLACED BY 000 983 22 91 TOGETHER WITH 1 ANTISQUEAK, TOP 000 983 01 98 |
- | A 10 120 680 15 29 | - | - | |
| ANTISQUEAK, TOP IN ENGINE SPACE, BODY FRONT END, CENTER BITUMINIZED FELT CARDBOARD, 2 MM THICK |
001 | A 00 098 322 91 | - | - | |
| ANTISQUEAK, TOP MOLTOPREN, 10 MM THICK IN ENGINE SPACE, BODY FRONT END, CENTER |
001 | A 00 098 301 98 | - | - | |
| ANTISQUEAK, BOTTOM IN ENGINE SPACE, BODY FRONT END, CENTER Replaced by: A 10 180 680 21 29 |
- | A 10 180 680 22 29 | - | - | |
| 013 | ANTISQUEAK, BOTTOM IN ENGINE SPACE, BODY FRONT END, CENTER |
001 | A 10 180 680 21 29 | - | - |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 3,5X22 DIN 7983 DBL 8451-21 ANTISQUEAK, CENTER, AT BODY FRONT END |
005 | N 007983 003231 | - | - | |
| COUNTERSUNK SHEET METAL WASHER ANTISQUEAK, CENTER, AT BODY FRONT END |
005 | A 00 098 512 62 | - | - | |
| BRACKET FOR ATE BOOSTER BRAKE |
001 | A 10 120 680 00 56 | - | - | |
| RUBBER MOULDING, | 001 | A 00 098 710 36 | - | $4.94 | |
| RUBBER MOULDING, | - | A 00 098 710 36 | - | $4.94 | |
| LENS HEAD SCREW A M 6X15 DIN 7985 |
004 | N 007985 006108 | - | - | |
| LOCK WASHER B 6 DIN 127 | 004 | N 000127 006200 | - | - | |
Replaced by: A 000 983 41 92 |
- | A 10 120 682 01 10 | - | - | |
Replaced by: A 000 983 41 92 |
- | A 10 120 682 02 10 | - | - | |
| ANTISQUEAK JUTE FELT, 8 MM THICK Replaced by: A 000 983 41 92 |
- | A 10 120 682 00 51 | - | - | |
| ANTISQUEAK JUTE FELT, 8 MM THICK |
- | A 00 098 341 92 | - | - | |
| FOR INTERMEDIATE WALL BEHIND REAR SEAT, CENTER, 80X835-MM |
002 | - | - | ||
| FOR INTERMEDIATE WALL BEHIND REAR SEAT, LATERAL, 246X425-MM |
002 | - | - | ||
| FOR ROOF, 70X1,250 MM | NB | - | - | ||
| REPLACED BY 000 983 01 98 IN ENGINE ROOM Replaced by: A 000 983 01 98 |
- | A 11 120 680 14 29 | - | - | |
| ANTISQUEAK IN ENGINE ROOM Replaced by: A 000 983 01 98 |
- | A 10 121 680 01 29 | - | - | |
COVERINGS |
- | XXX XXX XXX XXXX | - | - | |
| 020 | DRIVER'S FLOOR, LEFT | 001 | A 10 120 680 03 08 | - | - |
| 021 | DRIVER'S FLOOR, RIGHT | 001 | A 10 120 680 04 08 | - | - |
| 022 | COUNTERSUNK SHEET METAL SCREW DRIVER'S FLOOR AT BODY FLOOR |
004 | A 00 099 017 42 | - | $0.12 |
| COUNTERSUNK SHEET METAL SCREW B 5,5X22 DIN 7982 DBL 8451-21 DRIVER'S FLOOR AT BODY FLOOR |
004 | N 007982 005205 | - | $1.41 | |
| 023 | BUTTON DRIVER'S FLOOR AT BODY FLOOR |
004 | A 00 098 814 80 | - | $4.06 |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X32 DIN 7983 DBL 8451-21 DRIVER'S FLOOR AT BODY FLOOR |
004 | N 007983 004228 | - | $0.06 | |
| COVER FOR ELECTR. TRANSMITTER IN REAR COMPARTMENT FLOOR Replaced by: A 136 984 02 52 |
- | A 11 098 700 45 | - | - | |
| 024 | COVER FOR ELECTR. TRANSMITTER IN REAR COMPARTMENT FLOOR |
001 | A 13 698 402 52 | - | - |
| IN TRANSMISSION COVER PLATE FOR OIL FILLER NIPPLE |
001 | - | - | ||
| RUBBER BUFFER FOR LOCKING DRAIN HOLES AT SIDE MEMBER CAP AND CROSS MEMBER, BOTTOM Replaced by: A 000 987 18 40 |
- | A 00 098 796 40 | - | - | |
| 025 | RUBBER BUFFER FOR LOCKING DRAIN HOLES AT SIDE MEMBER CAP AND CROSS MEMBER, BOTTOM |
007 | A 00 098 718 40 | - | $0.81 |
| 026 | RUBBER PLUG FOR LOCKING DRAIN HOLES AT SIDE MEMBER CAP |
002 | A 11 198 712 15 | - | - |
| 027 | RUBBER BUFFER FOR LOCKING DRAIN HOLES AT FLOOR, REAR, AND FORK CAP, FROM, BOTTOM |
003 | A 00 098 792 40 | - | $0.08 |
| 028 | SCREENING PLATE, FRONT | 001 | A 11 120 680 00 20 | - | - |
| COUNTERSUNK SCREW A M 6X12 DIN 7987 DBL 8451-21 SCREENING PLATE AT PEDAL FLOOR |
003 | N 007987 006128 | - | - | |
| 029 | LOCKING SCREW FOR COVERING THREADED HOLES AT TUNNEL AND BODY REAR END IF NO SAFETY BELTS ARE FITTED |
004 | A 00 099 012 22 | - | - |
RUBBER MATS |
- | XXX XXX XXX XXXX | - | - | |
| 030 | RUBBER MAT FOR TUNNEL, FRONT |
001 | A 10 120 684 05 13 | - | - |
| 031 | RUBBER MAT, LEFT FOR DRIVER'S FLOOR |
001 | A 12 068 403 02 | - | - |
| RUBBER MAT, LEFT FOR DRIVER'S FLOOR |
001 | A 10 120 684 11 02 | - | - | |
| RUBBER MAT, RIGHT FOR DRIVER'S FLOOR Replaced by: A 10 120 684 13 02 |
- | A 12 068 404 02 | - | - | |
| 032 | RUBBER MAT, RIGHT FOR DRIVER'S FLOOR |
001 | A 10 120 684 13 02 | - | - |
| 033 | BUTTON RUBBER MAT AT PEDAL FLOOR |
003 | A 00 098 823 80 | - | - |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X32 DIN 7983 DBL 8451-21 RUBBER MAT AT PEDAL FLOOR |
003 | N 007983 004228 | - | $0.06 | |
| 034 | LINING RUBBER MAT FOR CENTER TUNNEL BETWEEN DRIVER'S SEAT |
001 | A 10 120 684 02 06 | - | - |
| RUBBER MAT FOR REAR FLOOR Replaced by: A 120 684 00 14 |
- | A 10 120 684 02 14 | - | - | |
| 035 | RUBBER MAT FOR REAR FLOOR |
001 | A 12 068 400 14 | - | - |
| BUTTON RUBBER MAT AT REAR FLOOR Replaced by: A 000 988 14 80 |
- | A 00 098 822 80 | - | - | |
| 036 | BUTTON RUBBER MAT AT REAR FLOOR |
004 | A 00 098 814 80 | - | $4.06 |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X19 DIN 7983 DBL 8451-21 RUBBER MAT AT REAR FLOOR |
004 | N 007983 004239 | - | - | |
| 040 | COVERING FOR SPARE WHEEL RECESS |
001 | A 10 120 680 01 09 | - | - |
| 041 | RUBBER MAT IN LUGGAGE COMPARTMENT, LEFT |
001 | A 12 068 401 05 | - | - |
| RUBBER MAT IN LUGGAGE COMPARTMENT, RIGHT |
001 | A 12 068 402 05 | - | - | |
| 042 | RUBBER MAT CENTER PIECE FOR LUGGAGE COMPARTMENT |
001 | A 12 068 400 04 | - | - |
| 043 | BUTTON RUBBER MATS AT REAR COMPARTMENT FLOOR |
006 | A 00 098 817 80 | - | $15.51 |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X19 DIN 7983 DBL 8451-21 RUBBER MATS AT REAR COMPARTMENT FLOOR |
006 | N 007983 004239 | - | - | |
| 044 | LINING, LEFT FOR ENTRANCE |
001 | A 10 120 686 09 80 | - | - |
| 045 | LINING, RIGHT FOR ENTRANCE |
001 | A 10 120 686 10 80 | - | - |
| 050 | CUP FOR PEDAL SEALING |
002 | A 10 186 687 00 37 | - | - |
| LENS HEAD SHEET METAL SCREW B Z 3,5X6,5 DIN 7981 DBL 8451-21 CUP AT FRONT WALL |
006 | N 007981 003323 | - | $0.43 | |
| 052 | LOCKING PLATE TO LOCK HOLE FOR CHOKE WIRE CABLE THROUGH COVER PLATE |
001 | A 00 098 703 44 | - | $2.27 |
| TO SEAL OF IDLING CONTROL CABLE IN COVER PLATE |
001 | - | - | ||
| 053 | LOCKING PLATE TO LOCK HOLE IN SHELL PLATE FOR STARTER STOPPING CABLE |
001 | A 00 098 702 44 | - | $2.27 |
| TO LOCK HOLE FOR CABLE TO INJECTION PUMP |
001 | - | - | ||
| TO LOCK HOLE FOR CHOKE WIRE CABLE IN PEDAL FLOOR |
001 | - | - | ||
| TO LOCK HOLE FOR STARTER CABLE |
001 | - | - | ||
| BUFFER KNOB | - | A 00 098 730 40 | - | - | |
| 054 | RUBBER BUFFER TO LOCK HOLES AT FRONT WALL, TOP PART |
001 | A 00 098 792 40 | - | $0.08 |
| 055 | RUBBER BUFFER TO LOCK HOLES IN WHEEL ARCH PAN |
001 | A 00 098 718 40 | - | $0.81 |
| COVERING (TEX LEATHER) | - | A 00 098 300 86 | - | - | |
| COVERING (TEX LEATHER) | - | A 00 098 300 86 | - | - | |
| COVERING PLASTIC FOIL WITH MOLTO, 150 MM WIDE |
- | A 00 098 364 86 | - | - | |
| COVERING PLASTIC FOIL WITH MOLTO, 150 MM WIDE |
- | A 00 098 364 86 | - | - | |
| FOR INSTRUMENT PANEL, BOTTOM, RIGHT AND BOTTOM, LEFT |
002 | - | - | ||
| FOR INSTRUMENT PANEL, TOP, LEFT |
002 | - | - | ||
| FOR INSTRUMENT PANEL, ABOVE AND BELOW COMBI-INSTRUMENT |
004 | - | - | ||
| INTERMEDIATE LAYER MOLTOPREN, 5 MM THICK FOR INSTRUMENT PANEL, TOP |
002 | A 00 098 300 98 | - | - | |
| INTERMEDIATE LAYER MOLTOPREN, 5 MM THICK FOR INSTRUMENT PANEL, TOP |
- | A 00 098 300 98 | - | - | |
| INTERMEDIATE LAYER MOLTOPREN, 10 MM THICK FOR INSTRUMENT PANEL, BOTTOM |
002 | A 00 098 301 98 | - | - | |
| 070 | COVERING, LEFT FOR FRONT WALL, LATERAL, BOTTOM |
001 | A 10 120 688 07 06 | - | - |
| 071 | COVERING, RIGHT FOR FRONT WALL, LATERAL, BOTTOM |
001 | A 10 120 688 08 06 | - | - |
| 072 | FIXING RAIL, FRONT, BOTTOM, LEFT FOR FRONT WALL COVERING |
001 | A 10 120 688 01 20 | - | - |
| 073 | FIXING RAIL, FRONT, BOTTOM, RIGHT FOR FRONT WALL COVERING |
001 | A 10 120 688 02 20 | - | - |
| COUNTERSUNK SHEET METAL SCREW B 3,9X13 DIN 7982 DBL 8451-21 FIXING RAIL AT FRONT WALL, LATERAL |
008 | N 007982 003218 | - | - | |
| 074 | COVERING FOR INSTRUMENT PANEL, LATERAL, LEFT FOR OPERATING LEVER OF HEATING AND VENTILATION |
001 | A 12 068 009 83 | - | - |
| COVERING FOR INSTRUMENT PANEL, LATERAL, LEFT FOR OPERATING LEVER OF HEATING AND VENTILATION |
001 | A 12 068 011 83 | - | - | |
| 075 | COVERING FOR INSTRUMENT PANEL, LATERAL, RIGHT FOR OPERATING LEVER OF HEATING AND VENTILATION |
001 | A 12 068 012 83 | - | - |
| COVERING FOR INSTRUMENT PANEL, LATERAL, RIGHT FOR OPERATING LEVER OF HEATING AND VENTILATION |
001 | A 12 068 010 83 | - | - | |
| CLIP NUT OPTIONAL COVERING AT PARTITION, OUTSIDE |
004 | A 00 099 404 45 | - | - | |
| CLIP NUT OPTIONAL COVERING AT PARTITION, OUTSIDE |
004 | A 00 099 416 45 | - | - | |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X13 DIN 7983 DBL 8451-21 COVERING AT PARTITION, OUTSIDE |
004 | N 007983 004244 | - | - | |
GLOVE BOX |
- | XXX XXX XXX XXXX | - | - | |
| 080 | GLOVE BOX COVER | 001 | A 12 068 000 97 | - | - |
| GLOVE BOX COVER | 001 | A 12 068 001 97 | - | - | |
| 083 | GLOVE BOX HINGE, LEFT | 001 | A 12 068 001 87 | - | - |
| GLOVE BOX HINGE, LEFT | 001 | A 12 068 004 87 | - | - | |
| 084 | GLOVE BOX HINTE, RIGHT | 001 | A 12 068 002 87 | - | - |
| GLOVE BOX HINGE, RIGHT | 001 | A 12 068 003 87 | - | - | |
| COUNTERSUNK SCREW A M 4X6 DIN 7987 DBL 8451-21 HINGE AT COVER |
004 | N 007987 004118 | - | - | |
| CLIP NUT OPTIONAL |
004 | A 00 099 404 45 | - | - | |
| CLIP NUT GLOVE BOX COVER AT INSTRUMENT PANEL |
004 | A 00 099 416 45 | - | - | |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B 4,2X13 DIN 7983 DBL 8451-21 GLOVE BOX COVER AT INSTRUMENT PANEL |
004 | N 007983 004244 | - | - | |
| 091 | GUIDE FORK GLOVE BOX COVER AT INSTRUMENT PANEL |
002 | A 10 186 689 00 33 | - | - |
| 092 | PRESSURE SPRING GLOVE BOX COVER AT INSTRUMENT PANEL |
001 | A 18 699 320 01 | - | $11.11 |
| LOCK WITH KEY | 001 | A 12 068 900 01 | - | - | |
| SPACER RING | 001 | A 10 120 689 00 36 | - | - | |
| RUBBER WASHER, DIA. 24-MM, 2-MM THICK |
001 | A 10 120 689 00 97 | - | - | |
| RUBBER WASHER, DIA. 28-MM, 2-MM THICK |
001 | A 10 120 689 01 97 | - | - | |
| RUBBER WASHER, DIA. 30-MM, 3-MM THICK |
001 | A 10 180 689 00 97 | - | - | |
| 095 | COVER FOR INSTRUMENT PANEL, CENTER |
001 | A 10 120 689 02 39 | - | - |
| 096 | TYPE DESIGNATION PLATE, INSIDE AT INSTRUMENT PANEL |
001 | A 12 081 700 14 | - | - |
| 098 | FLAT CLIP TYPE DESIGNATION PLATE AT COVER |
002 | A 00 099 400 45 | - | - |
| CLIP NUT OPTIONAL COVER AT PARTITION |
004 | A 00 099 404 45 | - | - | |
| CLIP NUT OPTIONAL COVER AT PARTITION |
004 | A 00 099 416 45 | - | - | |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW B Z 4,2X13 DIN 7983 DBL 8451-21 COVER AT PARTITION |
003 | N 007983 004322 | - | - | |
| COUNTERSUNK SHEET METAL SCREW B Z 4,2X13 DIN 7982 DBL 8451-21 COVER AT PARTITION |
001 | N 007982 004312 | - | - | |
| 099 | FIXING PLATE FOR OPERATION KNOBS |
001 | A 10 120 680 03 11 | - | - |
| FIXING PLATE FOR OPERATION KNOBS Replaced by: A 10 121 680 00 11 |
- | A 10 120 680 04 11 | - | - | |
| FIXING PLATE FOR OPERATION KNOBS |
001 | A 10 121 680 00 11 | - | - | |
| 100 | WASHER FOR CHARGING CONTROL LAMP |
001 | A 10 120 689 00 24 | - | - |
| LENS HEAD SHEET METAL SCREW B 3,9X16 DIN 7981 DBL 8451-21 FIXING PLATE AT COVER PLATE |
003 | N 007981 003227 | - | - | |
| WASHER A 4,3 DIN 9021 DBL 8451-11 FIXING PLATE AT COVER PLATE |
003 | N 009021 004103 | - | - | |
| WASHER FIXING PLATE AT COVER PLATE |
003 | A 00 098 411 55 | - | - | |
| CLIP NUT FIXING PLATE AT COVER PLATE |
003 | A 00 099 413 45 | - | $0.67 | |
| 110 | COVER PLATE FOR INSTRUMENT PANEL |
001 | A 10 105 680 00 75 | - | - |
| COUNTERSUNK SHEET METAL WASHER COVER PLATE AT COVER PLATE, GLOVE BOX |
002 | A 00 008 509 62 | - | - | |
| LENS HEAD COUNTERSUNK SHEET METAL SCREW, CHROMIUM PLATED B 2,9X9,5 DIN 7983 COVER PLATE AT COVER PLATE, GLOVE BOX |
002 | N 007983 002203 | - | $1.80 | |
| 111 | ORNAMENTAL BAR FOR INSTRUMENT PANEL |
001 | A 10 120 689 01 71 | - | - |
| 112 | CLIP FOR ORNAMENTAL BAR |
006 | A 00 098 858 78 | - | - |
| 113 | CLIP FOR ORNAMENTAL BAR |
004 | A 00 098 847 78 | - | - |
| 115 | COVER PLATE ABOVE COMPENSATOR IN LUGGAGE COMPARTMENT |
001 | A 10 120 690 00 22 | - | - |
| RUBBER MOULDING, | NB | A 00 098 710 36 | - | $4.94 | |
| LENS HEAD SHEET METAL SCREW B 4,8X9,5 DIN 7981 DBL 8451-21 COVER PLATE AT BODY REAR END |
002 | N 007981 004224 | - | - |
- To find out where to buy the item or equivalent, click on the part number.