Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 120.101 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
BATTERY AND STARTER CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 001 | LEAD BATTERY 12 V 84 AH | 001 | A 00 054 148 01 | - | - |
Replaced by: A 000 541 21 01 |
- | A 00 054 115 01 | - | - | |
| BATTERY 12 V 84 AH WITH MIPOR SEPARATOR Replaced by: A 000 541 21 01 |
- | A 00 054 129 01 | - | - | |
| BATTERY 12 V 84 AH WITH MIPOR SEPARATOR SPECIAL REQUEST TROPICAL DESIGN |
001 | A 00 054 121 01 | - | - | |
| SPECIAL COLD START BATTERY 12 V 84 AH SPECIAL REQUEST FOR REGIONS WITH LOW TEMPERATURES |
001 | A 00 054 160 01 | - | - | |
| 002 | MOUNTING FRAME | 001 | A 12 054 003 23 | - | $203.85 |
| 003 | TIGHTENING SCREW FOR BATTERY MOUNTING |
002 | A 12 054 101 24 | - | - |
| LOCK WASHER B 6 DIN 127 FOR BATTERY MOUNTING |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR BATTERY MOUNTING |
002 | - | - | ||
| INSULATING HOSE, 20-MM LONG OVER ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER |
002 | A 18 099 715 82 | - | $3.50 | |
| 004 | RUBBER PLUG FOR BLIND HOLE IN FRONT WALL |
007 | A 00 098 703 15 | - | $0.81 |
| 006 | STARTER CABLE FROM POS. POLE BATTERY TO STARTER MOTOR |
001 | A 12 054 002 30 | - | - |
| STARTER CABLE FROM POS. POLE BATTERY TO STARTER MOTOR |
001 | A 12 054 003 30 | - | - | |
| RUBBER PROTECTIVE CAP FOR STARTER CABLE Replaced by: A 111 546 00 35 |
- | A 13 654 600 35 | - | - | |
| 007 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 11 154 600 35 | - | - |
Replaced by: A 000 997 34 81 |
- | A 18 399 701 81 | - | $6.44 | |
Replaced by: A 000 997 34 81 |
- | A 18 699 704 81 | - | $2.33 | |
| GROMMET FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL Replaced by: A 000 997 34 81 |
- | A 18 199 701 81 | - | - | |
| 008 | GROMMET FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL |
001 | A 00 099 734 81 | - | $1.11 |
| 009 | GROUND CABLE FROM NEG. POLE BATTERY TO COUPLING FLANGE |
001 | A 12 054 006 31 | - | - |
| GROUND CABLE FROM NEG. POLE BATTERY TO COUPLING FLANGE |
001 | A 12 054 004 31 | - | - | |
CABLES |
- | XXX XXX XXX XXXX | - | - | |
Replaced by: A 120 540 20 05 |
- | A 12 054 009 05 | - | - | |
Replaced by: A 120 540 20 05 |
- | A 12 054 002 05 | - | - | |
| MAIN CABLE HARNESS WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED Replaced by: A 120 540 20 05 |
- | A 12 054 013 05 | - | - | |
| MAIN CABLE HARNESS WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED UP TO CHASSIS 6519774 |
001 | A 12 054 020 05 | - | - | |
| 015 | MAIN CABLE HARNESS FOR GENERATOR WITH SEPARATED GOVERNOR WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNES |
001 | A 12 054 022 05 | - | - |
| REPLACED BY 120 540 21 05 WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED Replaced by: A 120 540 21 05 |
- | A 12 054 010 05 | - | - | |
| REPLACED BY 120 540 21 05 WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED Replaced by: A 120 540 21 05 |
- | A 12 054 004 05 | - | - | |
| MAIN CABLE HARNESS WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED Replaced by: A 120 540 21 05 |
- | A 12 054 015 05 | - | - | |
| MAIN CABLE HARNESS WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED FROM CHASSIS 6519774 |
001 | A 12 054 021 05 | - | - | |
| MAIN CABLE HARNESS FOR GENERATOR WITH SEPARATED GOVERNOR WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNES |
001 | A 12 054 023 05 | - | - | |
| 016 | HOUSING, LOWER PART, WITH SOCKET |
001 | A 00 054 506 28 | - | - |
| 017 | GASKET BETWEEN HOUSING, UPPER AND LOWER PART |
001 | A 00 054 500 80 | - | - |
| FIXING CLIP FOR HOUSING, UPPER PART WITH LOWER PART TO GLOVE COMPARTMENT |
002 | A 00 098 834 78 | - | $0.36 | |
| 018 | ELECTRIC CABLE FROM GLOW PLUG RESISTOR TO GLOW PLUG |
001 | A 12 054 001 38 | - | - |
| ELECTRIC CABLE FOR MASTER CYLINDER WITH COMBINED REFILLING TANK FROM GLOW PLUG RESISTOR TO GLOW PLUG UP TO CHASSIS 4512545 |
001 | A 12 054 002 38 | - | - | |
| ELECTRIC CABLE FOR MASTER CYLINDER WITH SEPARATED REFILLING TANK FROM GLOW PLUG RESISTOR TO GLOW PLUG FROM CHASSIS 4512546 |
001 | A 12 054 013 38 | - | - | |
Replaced by: A 121 540 01 07 |
- | A 12 054 000 07 | - | - | |
UP TO CHASSIS 7513321 |
001 | A 12 154 001 07 | - | - | |
UP TO CHASSIS 7513321 Replaced by: A 121 540 02 07 |
- | A 12 054 001 07 | - | - | |
UP TO CHASSIS 7513321 |
001 | A 12 154 002 07 | - | - | |
| 020 | FROM CHASSIS 7513322 |
001 | A 12 154 008 07 | - | - |
| 026 | GROUND CABLE FROM ENGINE TO FRONT WALL |
001 | A 12 054 000 41 | - | - |
| HEX. NUT M 10 DIN 936-5 S FOR GROUND CABLE TO CLUTCH HOUSING FLANGE |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE TO PEDAL FLOOR UP TO CHASSIS 5516684 |
001 | - | - | ||
| HEX. -HD. SCREW M 6X12 DIN 933-8 G FOR GROUND CABLE TO PEDAL FLOOR UP TO CHASSIS 5516684 |
001 | - | - | ||
| 027 | SCREW WITH LOCKING PLATE FOR GROUND CABLE TO PEDAL FLOOR FROM CHASSIS 5516685 |
001 | A 12 042 002 27 | - | $7.40 |
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE TO PEDAL FLOOR FROM CHASSIS 5516685 |
001 | - | - | ||
| FIXING CLAMP FOR STEERING SPINDLE CABLE HARNESS TO FORKED MEMBER |
001 | A 18 199 500 20 | - | - | |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR STEERING SPINDLE CABLE HARNESS TO FORKED MEMBER |
001 | - | - | ||
| 028 | GROUND CABLE FROM STEERING SPINDLE CABLE HARNESS TO STRUT IN WHEEL ARCH FOR DOUBLE-JOINT REAR AXLE UP TO CHASSIS 5514467 |
001 | A 12 054 000 38 | - | - |
| LOCK WASHER B 4 DIN 127 FOR GROUND CABLE TO WHEEL ARCH STRUT FOR DOUBLE-JOINT REAR AXLE UP TO CHASSIS 5514467 |
001 | - | - | ||
| LENS-HD. SCREW AM 4X12 DIN 7985- 4S FOR GROUND CABLE TO WHEEL ARCH STRUT FOR DOUBLE-JOINT REAR AXLE UP TO CHASSIS 5514467 |
001 | - | - | ||
| INSULATING HOSE, 200-MM LONG B 16X18 SW DIN 40621 FOR MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER |
001 | - | - | ||
| CABLE CONNECTOR, 6-POLES FOR TAILLIGHT CABLE HARNESS UP TO CHASSIS 6519774 |
001 | A 00 054 617 41 | - | $7.78 | |
| 031 | CABLE CONNECTOR, 5-POLES FOR TAILLIGHT CABLE HARNESS UP TO CHASSIS 4507993 |
001 | A 00 054 619 41 | - | - |
| 031 | CABLE CONNECTOR, 5-POLES FOR TAILLIGHT CABLE HARNESS FROM CHASSIS 6519775 |
002 | A 00 054 619 41 | - | - |
| 032 | CABLE CONNECTOR, 5-POLES FOR STEERING SPINDLE HARNESS FROM CHASSIS 4507994 |
001 | A 00 054 606 41 | - | - |
| 033 | CABLE CONNECTOR, 2-POLES FOR HEATING BLOWER CONNECTION |
002 | A 00 054 618 41 | - | $48.92 |
| 033 | CABLE CONNECTOR, 2-POLES FOR BLINKER LIGHT, REAR UP TO CHASSIS 6519774 |
001 | A 00 054 618 41 | - | $48.92 |
| LENS-HD. SHEET METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5-POLES, TO WHEEL ARCH PAN |
002 | - | - | ||
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR TO FRONT WALL |
004 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR TO REINFORCEMENT BRACKET, LEFT AND RIGHT |
004 | - | - | ||
| FIXING CLAMP FOR CABLE HARNESS TO GENERATOR |
001 | A 18 199 500 20 | - | - | |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR CABLE HARNESS TO GENERATOR |
001 | - | - | ||
| WASHER 4,3 DIN 125 FOR CABLE HARNESS TO GENERATOR |
001 | - | - | ||
| FIXING CLAMP FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 |
001 | A 18 199 500 20 | - | - | |
| FIXING CLIP FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 |
002 | A 00 098 888 78 | - | - | |
| LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS |
001 | - | - | ||
| LENS-HD. SCREW AM 5X10 DIN 7985- 4S FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 |
001 | - | - | ||
| CABLE HARNESS FROM 2-POLES CABLE CONNECTOR TO REVERSE DRIVE LIGHT Replaced by: A 180 540 31 38 |
- | A 12 054 017 38 | - | - | |
| 034 | CABLE HARNESS FROM 2-POLES CABLE CONNECTOR TO REVERSE DRIVE LIGHT FROM CHASSIS 5519057 |
001 | A 18 054 031 38 | - | - |
| FIXING CLAMP FROM CHASSIS 5519057 |
001 | A 18 699 502 20 | - | $11.11 | |
| 035 | BRACKET FRO CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH FROM CHASSIS 5519057 |
001 | A 18 054 600 43 | - | - |
| 036 | BRACKET FRO CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH FROM CHASSIS 5519057 |
001 | A 18 054 601 43 | - | - |
| 36a | GROMMET AT BRACKET FOR CABLE HARNESS FROM CHASSIS 5519057 |
002 | A 00 099 731 81 | - | $0.98 |
| GROMMET FOR MAIN CABLE HARNESS TO FRONT WALL Replaced by: A 181 997 00 81 |
- | A 18 699 707 81 | - | $2.61 | |
| 037 | GROMMET FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | A 18 199 700 81 | - | - |
| 038 | GROMMET FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | A 00 099 727 81 | - | $1.49 |
| 38a | GROMMET FOR CABLE TO BLINKER LIGHT THROUGH WHEEL ARCH |
002 | A 00 099 722 81 | - | $0.98 |
| 039 | FIXING CLIP FOR MAIN CABLE HARNESS AT FRONT WALL |
005 | A 00 098 833 78 | - | $0.67 |
| 039 | FIXING CLIP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 098 833 78 | - | $0.67 |
| 040 | FIXING CLIP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 098 834 78 | - | $0.36 |
| 040 | FIXING CLIP FOR MAIN CABLE HARNESS AT FRONT WALL |
005 | A 00 098 834 78 | - | $0.36 |
| GROMMET FOR FUEL TRANSMITTER CABLE Replaced by: A 000 997 18 81 |
- | A 00 099 717 81 | - | - | |
| 042 | GROMMET FOR FUEL TRANSMITTER CABLE |
001 | A 00 099 718 81 | - | - |
| GROMMET FOR LUGGAGE COMPARTMENT COVER, INNER PLATE UP TO CHASSIS 7513321 |
001 | A 00 099 722 81 | - | $0.98 | |
| GROMMET FOR REAR SEAT SUPPORT Replaced by: A 000 997 30 81 |
- | A 00 099 727 81 | - | $1.49 | |
| GROMMET FOR REAR SEAT SUPPORT UP TO CHASSIS 7503757 |
002 | A 00 099 730 81 | - | $1.79 | |
| GROMMET FOR MAIN CABLE HARNESS THROUGH GLOVE BOX |
001 | A 00 099 730 81 | - | $1.79 | |
| FIXING CLIP FOR TAILLIGHT CABLE HARNESS TO COVER PLATE |
008 | A 00 098 833 78 | - | $0.67 | |
| FIXING CLIP FOR TAILLIGHT CABLE HARNESS TO COVER PLATE |
005 | A 00 098 834 78 | - | $0.36 | |
| FIXING CLAMP FOR TRANSMITTER CABLE FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 |
001 | A 18 699 502 20 | - | $11.11 | |
| LENS-HD. SCREW AM 5X10 DIN 7985- 4S FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 |
001 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE TRANSMITTER TO REAR CROSS MEMBER FROM CHASSIS 7513322 |
001 | - | - | ||
| FIXING CLAMP 1X8 DIN 72571 FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 |
001 | - | - | ||
| LENS-HD. SCREW AM 4X10 DIN 7985- 4S FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 |
001 | - | - | ||
| 056 | FIXING SHACKLE FOR TAILLIGHT CABLE, LEFT AND RIGHT IS MOUNTED WITH FENDER AND WHEEL ARCH |
008 | A 12 054 601 82 | - | - |
| LENS-HD. SCREW AM 4X10 DIN 7985- 4S FOR GROUND CONNECTION, TAILLIGHT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION, TAILLIGHT |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR GROUND CONNECTION, TAILLIGHT |
002 | - | - | ||
| FIXING CLIP FOR CABLE TO LICENCE PLATE LIGHT TO LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7513321 |
003 | A 00 098 817 78 | - | - | |
| FIXING CLAMP FOR CABLE TO LICENCE PLATE LIGHT TO LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7513321 |
002 | A 18 699 502 20 | - | $11.11 | |
| 061 | CABLE COVER PLATE FOR CABLE PROTECTIVE PLATE TO REAR CROSS MEMBER |
001 | A 12 054 600 81 | - | - |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE TO REAR CROSS MEMBER |
002 | - | - | ||
| 062 | FIXING CLAMP FOR CABLE HARNESS TO STEERING SPINDLE, TO STARTER MOTOR AND REVERSE DRIVE LIGHT TO FRONT WALL |
001 | A 13 699 504 20 | - | - |
| FIXING CLAMP FOR MAIN CABLE HARNESS TO FRONT WALL Replaced by: A 136 995 00 37 |
- | A 13 699 504 20 | - | - | |
| 063 | FIXING CLAMP FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | A 13 699 500 37 | - | $27.83 |
| LENS-HD. SCREW AM 4X12 DIN 7985- 4S FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | - | - | ||
| 066 | CAGE CLIP WITH NUT FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | A 00 099 022 91 | - | - |
| LENS-HD. SCREW AM 6X15 DIN 7985- 4S FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS TO FRONT WALL |
001 | - | - | ||
Replaced by: A 000 997 47 82 |
- | A 12 099 708 82 | - | - | |
| HOSE PIECE, 18X20X20-MM LONG OVER STARTER CABLE AND AMIN CABLE HARNESS Replaced by: A 000 997 47 82 |
- | A 18 099 715 82 | - | $3.50 | |
| 067 | HOSE PIECE, 18X20X20-MM LONG OVER STARTER CABLE AND AMIN CABLE HARNESS ORDER BY THE METER |
003 | A 00 099 747 82 | - | - |
| 068 | FIXING CLAMP FOR MAIN CABLE BARNESS TO FRONT WALL |
001 | A 13 699 501 35 | - | - |
| FIXING CLAMP FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 |
001 | A 18 799 500 37 | - | - | |
| LENS-HD. SCREW AM 6X12 DIN 7985-4S FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 |
001 | - | - | ||
| WASHER 4,3 DIN 125 FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 |
001 | - | - | ||
Replaced by: A 120 540 04 50 |
- | A 12 054 000 50 | - | - | |
Replaced by: A 120 540 04 50 |
- | A 12 054 003 50 | - | - | |
| FUSE BOX WITHOUT FUSE Replaced by: A 120 540 04 50 |
- | A 12 054 006 50 | - | - | |
| 071 | FUSE BOX WITHOUT FUSE | 001 | A 12 054 004 50 | - | - |
| COVER Replaced by: A 000 545 09 03 |
- | A 00 054 503 03 | - | - | |
| 072 | COVER | 001 | A 00 054 509 03 | - | - |
| FUSE, 12 AMP. 8 DIN 72581 |
009 | - | - | ||
| FUSE, 35 AMP. 25 DIN 72581 |
001 | - | - | ||
| 074 | BRACKET, FUSE BOX | 001 | A 12 054 513 95 | - | - |
| 076 | SPRING NUT FOR FUSE BOX TO BRACKET |
002 | A 00 099 413 45 | - | $0.67 |
| LENS-HD. SHEET METAL SCREW BZ 3,9X19 DIN 7981 FOR FUSE BOX TO BRACKET |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET TO BODY FRONT END |
002 | - | - | ||
| LENS-HD. SCREW AM 6X12 DIN 7985- 4S FOR BRACKET TO BODY FRONT END |
002 | - | - | ||
| FIXING CLAMP FOR MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | A 18 199 500 20 | - | - | |
| LENS-HD. SCREW AM 4X10 DIN 7985- 4S FOR MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| GROUND CABLE FOR PARKING LIGHT WITH ASYMMETRICAL DIMMER LIGHT FROM CHASSIS 7516125 |
001 | A 18 054 030 38 | - | - | |
| FIXING CLAMP FOR MAIN CABLE HARNESS TO FRAME CROSS MEMBER, FRONT Replaced by: A 121 995 00 22 |
- | A 12 099 501 22 | - | - | |
| 077 | FIXING CLAMP FOR MAIN CABLE HARNESS TO FRAME CROSS MEMBER, FRONT |
002 | A 12 199 500 22 | - | - |
| HEX. -HD. SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS TO FRAME CROSS MEMBER, FRONT |
002 | - | - | ||
| 078 | FIXING CLAMP FOR CABLE MOUNTING, FOOT DIMMER SWITCH AND GROUND CONNECTION |
001 | A 15 399 503 22 | - | - |
| LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE MOUNTING, FOOT DIMMER SWITCH AND GROUND CONNECTION |
001 | - | - | ||
INSTRUMENTS AND SWITCHES |
- | XXX XXX XXX XXXX | - | - | |
| PUSH-PULL SWITCH FOR INSTRUMENT LIGHTING Replaced by: A 000 545 06 11 |
- | A 12 054 000 44 | - | - | |
| 080 | PUSH-PULL SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - | $29.83 |
| 081 | ESCUTCHEON | 001 | A 12 054 500 72 | - | - |
| 082 | FELT RING | 001 | A 00 099 720 40 | - | $0.50 |
| 083 | BUTTON | 001 | A 12 054 502 37 | - | - |
| FIXING CLAMP FOR CAPILLARY TUBE TO FRONT WALL OR HEATING HOSE RESP. |
001 | A 12 099 500 05 | - | - | |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR CAPILLARY TUBE TO FRONT WALL OR HEATING HOSE RESP. |
001 | - | - | ||
| CABLE BRACKET 5X0,3X135 N 286 FOR CAPILLARY TUBE TO HEATING HOSE |
001 | - | - | ||
| SEALING RING A 14X18 DIN 7603 A1 FOR TELE-THERMOMETER |
001 | - | - | ||
Replaced by: A 120 542 28 01 |
- | A 12 054 203 01 | - | - | |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION Replaced by: A 120 542 28 01 |
- | A 12 054 207 01 | - | - | |
| 084 | COMBI-INSTRUMENT WITH KILOMETER GRADUATION |
001 | A 12 054 228 01 | - | - |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION |
001 | A 12 054 211 01 | - | - | |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION TIRES 6.40-15 RATIO 1:3.7 |
001 | A 12 054 223 01 | - | - | |
| COMBI-INSTRUMENT WITH M. P. H. GRADUATION TIRES 6,40-15 RATIO 1:3.7 |
001 | A 12 054 222 01 | - | - | |
| COMBI-INSTRUMENT WITH M. P. H. GRADUATION EXPORT TROPICAL DESIGN TIRES 6.40-13 RATIO 1:3.7 |
001 | A 12 054 208 01 | - | - | |
| COMBI-INSTRUMENT WITH M. P. H. GRADUATION EXPORT, SPECIAL REQUEST TIRES 6.40-13 RATIO 1:4.1 |
001 | A 12 054 219 01 | - | - | |
| COMBI-INSTRUMENT WITH KILOMETER GRADUATION EXPORT, SPECIAL REQUEST TIRES 6.40-13 RATIO 1:4.1 |
001 | A 12 054 221 01 | - | - | |
Replaced by: A 000 542 74 06 |
- | A 00 054 267 06 | - | - | |
| KILOMETER COUNTER Replaced by: A 000 542 74 06 |
- | A 00 054 272 06 | - | - | |
| 085 | KILOMETER COUNTER FOR COMBI-INSTRUMENT 120 542 28 01/11 01 |
001 | A 00 054 274 06 | - | - |
| MILES COUNTER FOR COMBI-INSTRUMENT 120 542 08 01 |
001 | A 00 054 271 06 | - | - | |
| MILES COUNTER FOR COMBI-INSTRUMENT 120 542 19 01 |
001 | A 00 054 293 06 | - | - | |
| KILOMETER COUNTER FOR COMBI-INSTRUMENT 120 542 21 01 |
001 | A 00 054 296 06 | - | - | |
| KILOMETER COUNTER FOR COMBI-INSTRUMENT 120 542 23 01 |
001 | A 00 054 295 06 | - | - | |
| MILES COUNTER FOR COMBI-INSTRUMENT 120 542 22 01 |
001 | A 00 154 297 06 | - | - | |
Replaced by: A 000 542 71 02 |
- | A 00 054 243 02 | - | - | |
| OIL PRESSURE GAUGE Replaced by: A 000 542 71 02 |
- | A 00 054 244 02 | - | - | |
| 086 | OIL PRESSURE GAUGE | 001 | A 00 054 271 02 | - | - |
| TELE-THERMOMETER Replaced by: A 000 542 87 05 |
- | A 00 054 283 05 | - | - | |
| 087 | TELE-THERMOMETER | 001 | A 00 054 287 05 | - | - |
Replaced by: A 000 542 44 03 |
- | A 00 054 229 03 | - | - | |
| FUEL GAUGE Replaced by: A 000 542 44 03 |
- | A 00 054 230 03 | - | - | |
| 088 | FUEL GAUGE | 001 | A 00 054 244 03 | - | - |
| TENSION SPRING FOR COMBI-INSTRUMENT Replaced by: A 120 993 17 10 |
- | A 12 099 314 10 | - | - | |
| 089 | TENSION SPRING FOR COMBI-INSTRUMENT |
002 | A 12 099 317 10 | - | - |
| RUBBER FRAME FOR COMBI-INSTRUMENT Replaced by: A 120 542 02 80 |
- | A 12 054 201 80 | - | - | |
| 090 | RUBBER FRAME FOR COMBI-INSTRUMENT |
001 | A 12 054 202 80 | - | - |
| RUBBER HOSE, 30 MM LONG FOR BRACKET, COMBI-INSTRUMENT |
001 | A 12 099 707 82 | - | - | |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | - | |
| 091 | LAMP SOCKET | 006 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
006 | - | - | ||
| CLOCK, MECHANICAL Replaced by: A 120 542 03 11 |
- | A 12 054 200 11 | - | - | |
| 100 | CLOCK, MECHANICAL | 001 | A 12 054 203 11 | - | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | - | |
| LAMP SOCKET | 001 | A 00 054 507 19 | - | - | |
| BULB H 12 V 2 W DIN 72601 |
001 | - | - | ||
| DIMMER RESISTOR FOR INSTRUMENT LIGHTING Replaced by: A 000 545 08 31 |
- | A 00 054 503 31 | - | - | |
| 109 | DIMMER RESISTOR FOR INSTRUMENT LIGHTING FROM CHASSIS 4500038 |
001 | A 00 054 508 31 | - | - |
| 113 | RELEASE SWITCH FOR TURN INDICATOR BLINKER LIGHT |
001 | A 00 054 501 24 | - | - |
| BLINKER LEVER KNOB, BLACK Replaced by: A 180 545 04 37 |
- | A 18 054 502 37 | - | - | |
| 114 | BLINKER LEVER KNOB, BLACK | 001 | A 18 054 504 37 | - | $30.25 |
| ADDITIONAL CABLE HARNESS | 001 | A 18 054 016 09 | - | - | |
| DISTANCE LIGHT BLINKER SWITCH, BLACK SPECIAL REQUEST, DISTANCE LIGHT BLINKER SYSTEM |
001 | A 00 054 538 24 | - | - | |
| BLINKER TRANSMITTER SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM |
001 | A 00 054 423 32 | - | - | |
| BRACKET FOR BLINKER TRANSMITTER SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM |
001 | A 12 054 501 40 | - | - | |
| CYLINDRICAL SCREW AM 5X10 DIN 84 - 4 S SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR BLINKER TRANSMITTER TO BRACKET SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM |
001 | - | - | ||
| HEX. NUT M 5 DIN 934 - 5 S FOR BLINKER TRANSMITTER TO BRACKET SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM |
001 | - | - | ||
| COUNTERSUNKSCREW AM 4X10 DIN 63 - 4 S FOR BRACKET, BLINKER TRANSMITTER TO BRACKET, FUSE BOX SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR BRACKET, BLINKER TRANSMITTER TO BRACKET, FUSE BOX SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM |
001 | - | - | ||
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9505143 |
001 | A 12 054 002 60 | - | - | |
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9505143 Replaced by: A 120 540 04 60 |
- | A 12 054 001 60 | - | - | |
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9505143 |
001 | A 12 054 004 60 | - | - | |
| OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9505143 |
001 | A 12 054 003 60 | - | - | |
| 122 | OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO COUPLING PIECE FROM CHASSIS 9505144 |
001 | A 12 054 007 60 | - | - |
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE FROM CHASSIS 9506161 |
001 | A 12 054 009 60 | - | - | |
| 123 | COUPLING PIECE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9505144 |
001 | A 12 854 200 47 | - | - |
| 124 | OIL PRESSURE GAUGE PIPE FROM COUPLING PIECE TO HOSE FROM CHASSIS 9505144 |
001 | A 12 054 008 60 | - | - |
| WASHER A 10,5 DIN 9021 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 9505143 |
001 | - | - | ||
| HEX. NUT M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 9505143 |
001 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 9505143 |
001 | - | - | ||
| SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 95051 |
002 | - | - | ||
| HEX. NUT BM 8 DIN 439 FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 9505 |
001 | - | - | ||
| FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 |
004 | A 13 699 505 01 | - | - | |
| FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 |
001 | A 13 699 505 01 | - | - | |
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 |
004 | - | - | ||
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 |
001 | - | - | ||
| RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 Replaced by: A 000 987 00 32 |
- | A 00 098 709 32 | - | $6.65 | |
| RUBBER HOSE, 25 MM LONG ORDER BY THE METER FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 |
004 | A 00 098 700 32 | - | - | |
| RUBBER HOSE, 25 MM LONG ORDER BY THE METER FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 |
001 | A 00 098 700 32 | - | - | |
| 126 | FIXING CLIP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 4506562 |
006 | A 00 098 855 78 | - | - |
| 126 | FIXING CLIP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 4506562 |
001 | A 00 098 855 78 | - | - |
| HOSE FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9505143 |
001 | A 13 654 002 59 | - | $57.27 | |
| HOSE FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9506160 |
- | A 13 654 002 59 | - | $57.27 | |
| 130 | HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9505144 |
001 | A 12 154 002 59 | - | $84.01 |
| HOSE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9506161 |
001 | A 12 154 001 59 | - | $84.01 | |
| BRAKE LIGHT SWITCH PRELIMINARY DESIGN UP TO INSTALLATION OF 000 545 22 09 |
001 | A 00 054 518 09 | - | - | |
| RUBBER CAP PRELIMINARY DESIGN UP TO INSTALLATION OF 000 545 22 09 |
001 | A 00 054 504 45 | - | - | |
Replaced by: A 000 545 22 09 |
- | A 00 054 513 09 | - | - | |
| BRAKE LIGHT SWITCH Replaced by: A 000 545 22 09 |
- | A 00 054 517 09 | - | - | |
| 131 | BRAKE LIGHT SWITCH | 001 | A 00 054 522 09 | - | - |
| BRACKET FOR CONNECTING SCREW UP TO CHASSIS 9506160 |
001 | A 12 054 202 40 | - | - | |
| BRACKET FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9506161 |
001 | A 12 054 217 40 | - | - | |
| LOCK WASHER B 5 DIN 127 FOR BRACKET TO BEARING CONTROL SHAFT |
001 | - | - | ||
| HEX. -HD. SCREW M 5X10 DIN 933-8 G FOR BRACKET TO BEARING CONTROL SHAFT |
001 | - | - | ||
| 132 | FOOT DIMMER SWITCH | 001 | A 00 054 504 12 | - | - |
| INSULATING PLATE FOR FOOT DIMMER SWITCH TO PEDAL FLOOR Replaced by: A 136 545 01 58 |
- | A 13 654 500 58 | - | - | |
| 133 | INSULATING PLATE FOR FOOT DIMMER SWITCH TO PEDAL FLOOR |
001 | A 13 654 501 58 | - | - |
| LENS-HD. COUNTERSUNK SCREW BM 4X30 DIN 7988- 4S FOR FOOT DIMMER SWITCH TO PEDAL FLOOR |
002 | - | - | ||
| 135 | CAGE CLIP WITH NUT FOR FOOT DIMMER SWITCH TO PEDAL FLOOR FROM CHASSIS 5516685 |
002 | A 00 099 025 91 | - | - |
| 136 | GROMMET FOR CABLE TO FOOT DIMMER SWITCH |
001 | A 00 099 727 81 | - | $1.49 |
| FLEXIBLE DRIVE SHAFT Replaced by: A 120 542 03 07 |
- | A 12 054 204 07 | - | - | |
| 137 | FLEXIBLE DRIVE SHAFT | 001 | A 12 054 203 07 | - | - |
| FIXING CLAMP, LEFT FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT UP TO CHASSIS 4504591 |
001 | A 12 099 500 05 | - | - | |
| 139 | FIXING CLAMP, LEFT FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 |
001 | A 12 099 500 01 | - | - |
| REPLACED BY 000 988 34 78 FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 Replaced by: A 000 988 34 78 |
- | A 12 054 208 40 | - | - | |
| CLIP FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 Replaced by: A 000 988 34 78 |
- | A 12 099 031 40 | - | - | |
| CLIP FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 |
002 | A 00 098 834 78 | - | $0.36 | |
| LENS-HD. SCREW AM 5X10 DIN 7985- 4S FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT |
002 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 |
002 | - | - | ||
| GROMMET FOR FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 00 099 731 81 | - | $0.98 | |
| GROMMET FOR FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL Replaced by: A 186 997 04 81 |
- | A 18 399 701 81 | - | $6.44 | |
| GROMMET FOR FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL |
001 | A 18 699 704 81 | - | $2.33 | |
| 141 | GROMMET FOR FLEXIBLE SHAFT THROUGH FORKED MEMBER |
002 | A 18 099 712 81 | - | - |
| 141 | GROMMET FOR FLEXIBLE SHAFT THROUGH FORKED MEMBER |
001 | A 18 099 712 81 | - | - |
| 142 | GROMMET FOR LOCKING OF 3RD PASSAGE AT FORKED MEMBER |
001 | A 18 098 700 44 | - | - |
Replaced by: A 001 542 07 20 |
- | A 00 054 227 20 | - | - | |
Replaced by: A 001 542 07 20 |
- | A 00 054 273 20 | - | - | |
Replaced by: A 001 542 07 20 |
- | A 00 054 244 20 | - | - | |
| HORN Replaced by: A 001 542 07 20 |
- | A 00 154 220 20 | - | - | |
| 150 | HORN | 001 | A 00 154 207 20 | - | - |
| HORN SPECIAL REQUEST FOR CARS TO FRANCE |
001 | A 00 054 271 20 | - | - | |
| HEX. -HD. SCREW M 10X28 DIN 931-8 G FOR HORN TO BRACKET |
001 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN TO BRACKET |
001 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN TO BRACKET |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION TO HORN |
002 | - | - | ||
| CYLINDRICAL SCREW AM 4X6 DIN 84 - 4 S FOR CABLE CONNECTION TO HORN |
002 | - | - | ||
| 151 | THREE-ELEMENT VOLTAGE REGULATOR FOR GENERATOR ALSO SEE GROUP 15 FROM CHASSIS 6501975 |
001 | A 00 015 455 06 | - | - |
| 152 | RUBBER BUSHING WITH TUBULAR RIVET FROM CHASSIS 6501975 |
003 | A 00 015 402 50 | - | - |
| REGULATOR SWITCH FOR GENERATOR FROM CHASSIS 6501975 Replaced by: A 001 154 00 06 |
- | A 00 015 417 06 | - | - | |
| REGULATOR SWITCH FOR GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
001 | A 00 115 400 06 | - | - | |
| LENS-HD. SCREW AM 6X20 DIN 7985- 4S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN FROM CHASSIS 6501975 |
003 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN FROM CHASSIS 6501975 |
003 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN FROM CHASSIS 6501975 |
003 | - | - | ||
| LENS -HD. SCREW AM 5X10 DIN 7985- 4S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
004 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
004 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
004 | - | - | ||
| 153 | CABLE HARNESS FOR GENERATOR TO GOVERNOR FROM CHASSIS 6501975 |
001 | A 12 054 003 08 | - | - |
| BRACKET FOR CABLE HARNESS TO GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
001 | A 63 615 501 27 | - | - | |
| GROMMET FOR CABLE HARNESS TO GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
001 | A 18 699 704 81 | - | $2.33 | |
| SPRING WASHER B 6 DIN 137 FOR CABLE HARNESS TO GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
001 | - | - | ||
| RUBBER HOSE OVER MAIN CABLE HARNESS AND GENERATOR CABLE HARNESS SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 |
002 | A 18 099 715 82 | - | $3.50 | |
| 154 | GROMMET FOR CABLE HARNESS. VOLTAGE REGULATOR, GENERATOR FROM CHASSIS 6501975 |
003 | A 00 099 707 81 | - | $1.35 |
| 155 | RUBBER PROTECTIVE CAP FOR CABLE HARNESS TO GENERATOR FROM CHASSIS 6501975 |
002 | A 00 054 602 35 | - | - |
| 156 | PIPE CLAMP FOR CABLE HARNESS TO GENERATOR FROM CHASSIS 6501975 |
001 | A 13 199 500 20 | - | - |
| ELECTRIC CABLE FROM TERMINAL 57 UP TO ADDITIONAL FUSE SPECIAL REQUEST FOGLIGHTS FOR CARS TO USA |
001 | A 12 054 019 38 | - | - | |
| INSULATING HOSE, 250-MM LONG B 6X7,2 SW DIN 40621 FOR CABLE 39 IN MAIN CABLE HARNESS ORDER BY THE METER SPECIAL REQUEST FOGLIGHTS FOR CAR |
001 | - | - | ||
| INSULATING HOSE, 100-MM LONG B 20X22,4 SW DIN 40621 OVER MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER SPECIAL REQUEST FOGLI |
001 | - | - | ||
| FUSE BOX, 2-POLES SPECIAL REQUEST FOGLIGHTS FOR CARS TO USA |
001 | A 00 054 503 01 | - | - | |
| CYLINDRICAL SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX TO FRESH-AIR DUCT SPECIAL REQUEST FOGLIGHTS FOR CARS TO USA |
001 | - | - | ||
GLOW STARTING SWITCH |
- | XXX XXX XXX XXXX | - | - | |
| GLOW STARTING SWITCH WITHOUT WIRE CABLE Replaced by: A 120 540 08 57 |
- | A 12 054 001 57 | - | - | |
| 160 | GLOW STARTING SWITCH WITHOUT WIRE CABLE |
001 | A 12 054 008 57 | - | - |
| GLOW STARTING SWITCH WITHOUT WIRE CABLE |
001 | A 12 054 009 57 | - | - | |
| GLOW STARTING SWITCH Replaced by: A 136 545 02 17 |
- | A 13 654 004 57 | - | - | |
| 161 | GLOW STARTING SWITCH | 001 | A 13 654 502 17 | - | $25.51 |
| 162 | OCTAGONAL NUT | 001 | A 00 099 022 51 | - | - |
| SWITCHING HANDLE FOR GLOW STARTING SWITCH Replaced by: A 120 540 10 83 |
- | A 12 054 007 83 | - | - | |
| 163 | SWITCHING HANDLE FOR GLOW STARTING SWITCH |
001 | A 12 054 010 83 | - | - |
| SWITCHING HANDLE FOR GLOW STARTING SWITCH Replaced by: A 120 540 11 83 |
- | A 12 054 006 83 | - | - | |
| SWITCHING HANDLE FOR GLOW STARTING SWITCH |
001 | A 12 054 011 83 | - | - | |
| LEVER FOR WIRE CABLE OPERATION Replaced by: A 120 540 07 78 |
- | A 12 054 002 78 | - | - | |
| 164 | LEVER FOR WIRE CABLE OPERATION |
001 | A 12 054 007 78 | - | - |
| LEVER FOR WIRE CABLE OPERATION Replaced by: A 120 540 08 78 |
- | A 12 054 006 78 | - | - | |
| LEVER FOR WIRE CABLE OPERATION |
001 | A 12 054 008 78 | - | - | |
| TOOTHED WASHER J 6,4 DIN 6797 PHOSPHATIERT FOR MOUNTING PIN |
001 | - | - | ||
| 165 | WASHER FOR MOUNTING PIN |
002 | A 12 054 500 76 | - | $30.68 |
| LOCK WASHER B 6 DIN 127 FOR MOUNTING PIN |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR MOUNTING PIN |
001 | - | - | ||
| 166 | PRESSURE SPRING FOR GUIDE SLEEVE, STOP SPRING |
001 | A 19 199 301 01 | - | - |
| BALL 6 MM III DIN 5401 FOR GUIDE SLEEVE, STOP SPRING |
001 | - | - | ||
| HEX. -HD. SCREW M 5X28 DIN 931-8 G FOR LEVER TO SHIFTING SHAFT |
001 | - | - | ||
| WASHER 5,3 DIN 433 FOR LEVER TO SHIFTING SHAFT |
001 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR LEVER TO SHIFTING SHAFT |
001 | - | - | ||
| CYLINDRICAL PIN 4 M6X16 DIN 7 FOR SHIFTING SHAFT TO GLOW STARTING SWITCH |
001 | - | - | ||
| HEX. -HD. SCREW M 5X15 DIN 933-8 G FOR WIRE CABLE TO GLOW STARTING SWITCH |
001 | - | - | ||
| 167 | SPACER RING FOR WIRE CABLE TO GLOW STARTING SWITCH |
001 | A 13 654 500 52 | - | - |
| WASHER 5,3 DIN 433 FOR WIRE CABLE TO GLOW STARTING SWITCH |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR WIRE CABLE TO GLOW STARTING SWITCH |
001 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR WIRE CABLE TO GLOW STARTING SWITCH |
001 | - | - | ||
| WASHER 5,3 DIN 433 FOR WIRE CABLE TO GLOW STARTING SWITCH |
001 | - | - | ||
| COTTER PIN 1,5X12 DIN 94 FOR WIRE CABLE TO GLOW STARTING SWITCH |
001 | - | - | ||
| HEX. -HD. SCREW M 6X15 DIN 933-8 G FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM |
003 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM |
001 | - | - | ||
| WASHER 6,4 DIN 433 FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM |
NB | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM |
003 | - | - | ||
| RELEASE SPRING Replaced by: A 136 993 14 10 |
- | A 12 099 315 10 | - | - | |
| 168 | RELEASE SPRING | 001 | A 13 699 314 10 | - | - |
| 170 | SEALING WASHER | 002 | A 12 142 700 59 | - | $2.98 |
| FIXING CLAMP 1X5 DIN 72571 |
001 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 |
001 | - | - | ||
Replaced by: A 000 545 19 20 |
- | A 00 054 512 20 | - | - | |
Replaced by: A 000 545 19 20 |
- | A 00 054 513 20 | - | - | |
| GLOW CONTROL MAKE BERU OPTIONAL Replaced by: A 000 545 19 20 |
- | A 00 054 514 20 | - | - | |
| 196 | GLOW CONTROL MAKE BERU OPTIONAL |
001 | A 00 054 519 20 | - | - |
| 196a | GLOW COIL OPTIONAL |
001 | A 00 054 506 21 | - | $5.07 |
| GLOW CONTROL MAKE BOSCH OPTIONAL |
001 | A 00 054 524 20 | - | - | |
| GLOW COIL OPTIONAL |
001 | A 00 054 507 21 | - | $6.59 | |
| RESISTOR MAKE BERU OPTIONAL Replaced by: A 000 545 32 18 |
- | A 00 054 517 18 | - | - | |
| 197 | RESISTOR MAKE BERU OPTIONAL |
001 | A 00 054 532 18 | - | - |
| GLOW PLUG RESISTOR MAKE BOSCH OPTIONAL |
001 | A 00 054 522 18 | - | - | |
| LOCK WASHER B 6 DIN 127 FOR RESISTOR |
002 | - | - | ||
| LENS-HD. SCREW AM 6X12 DIN 7985-4 S FOR RESISTOR |
002 | - | - | ||
| 200 | SOCKET FOR HAND LIGHT SPECIAL REQUEST |
001 | A 00 054 505 25 | - | $11.93 |
| ELECTRIC CABLE, 1.000-MM LONG A 1 DIN 72551 SW ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| INSULATING HOSE, 950-MM LONG B 3X3,8 DIN 40621 SW ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| 201 | BRACKET FOR SOCKET SPECIAL REQUEST |
001 | A 12 054 511 95 | - | - |
| CYLINDRICAL SCREW AM 5X10 DIN 8-4 S FOR BRACKET TO WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR BRACKET TO WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT |
002 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR BRACKET TO WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT |
002 | - | - | ||
THREE-TUNE SIGNAL SYSTEM - SPECIAL REQUEST |
- | XXX XXX XXX XXXX | - | - | |
| HORN Replaced by: A 001 542 08 20 |
- | A 00 054 245 20 | - | - | |
| HORN | 001 | A 00 154 208 20 | - | - | |
| HORN Replaced by: A 001 542 23 20 |
- | A 00 054 246 20 | - | - | |
| HORN | 001 | A 00 154 223 20 | - | - | |
| BRACKET FOR HORN |
002 | A 12 054 204 40 | - | - | |
| HEX. -HD. SCREW M 10X28 DIN 931-8 G FOR HORN TO BRACKET |
002 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN TO BRACKET |
002 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN TO BRACKET |
002 | - | - | ||
| HEX. -HD. SCREW M 6X15 DIN 931-8 G FOR BRACKET TO WHEEL ARCH PAN |
004 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET TO WHEEL ARCH PAN |
004 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR BRACKET TO WHEEL ARCH PAN |
004 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR BRACKET TO WHEEL ARCH PAN |
004 | - | - | ||
| CONTACTOR Replaced by: A 000 542 27 19 |
- | A 00 054 201 19 | - | - | |
| CONTACTOR | 001 | A 00 054 227 19 | - | - | |
| PUSH-PULL SWITCH FOR 3RD HORN Replaced by: A 000 545 06 11 |
- | A 12 054 000 44 | - | - | |
| PUSH-PULL SWITCH FOR 3RD HORN |
001 | A 00 054 506 11 | - | $29.83 | |
| ESCUTCHEON | 001 | A 12 054 500 72 | - | - | |
| BUTTON | 001 | A 12 054 502 37 | - | - | |
| FELT RING | 001 | A 00 099 720 40 | - | $0.50 | |
| ADDITIONAL CABLE HARNESS FOR THREE-TUNE SIGNAL SYSTEM |
001 | A 12 054 001 09 | - | - |
- To find out where to buy the item or equivalent, click on the part number.