Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 121.001 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
BATTERY, STARTER CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 001 | LEAD BATTERY 12 V | 001 | A 00 054 146 01 | - | - |
| LEAD BATTERY 12 V EXPORT, SPECIAL REQUEST TROPICAL DESIGN |
001 | A 00 054 112 01 | - | - | |
| COLD START BATTERY 12 V FOR REGIONS WITH COLD TEMPERATURES |
001 | A 00 054 158 01 | - | - | |
| 002 | FIXING FRAME | 001 | A 12 154 001 23 | - | - |
| 003 | TIGHTENING SCREW FOR FIXING OF BATTERY |
002 | A 12 054 101 24 | - | - |
| LOCK WASHER B 6 DIN 127 FOR FIXING OF BATTERY |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR FIXING OF BATTERY |
002 | - | - | ||
| RUBBER HOSE 20 MM LONG ABOVE ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER |
002 | A 00 098 705 32 | - | - | |
| 004 | RUBBER PLUG FOR BLIND HOLE IN FRONT WALL |
- | A 00 098 703 15 | - | $0.81 |
| 006 | STARTER CABLE FROM POS. POLE TO STARTER MOTOR |
- | A 12 854 000 30 | - | - |
| STARTER CABLE FROM POS. POLE TO STARTER MOTOR |
- | A 12 154 001 30 | - | - | |
| 007 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 13 654 600 35 | - | - |
| 008 | GROUND CABLE FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING |
- | A 18 054 000 31 | - | - |
| GROUND CABLE FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING |
- | A 18 054 004 31 | - | - | |
| 009 | RUBBER SLEEVE FOR STARTER CABLE THROUGH PARTITION |
- | A 18 699 707 81 | - | $2.61 |
| RUBBER SLEEVE FOR STARTER CABLE THROUGH PARTITION |
- | A 18 699 704 81 | - | $2.33 | |
| 010 | FIXING CLAMP FOR STARTER CABLE AT MOUNTING, CONTROL SHAFT (BODY FRONT END) |
- | A 18 799 500 37 | - | - |
| FIXING CLAMP FOR STARTER CABLE AT MOUNTING, CONTROL SHAFT (BODY FRONT END) |
- | A 18 199 500 20 | - | - | |
| LENS. -HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR STARTER CABLE AT MOUNTING, CONTROL SHAFT (BODY FRONT END) |
- | - | - | ||
| LENS. -HD. SCREW AM 5X10 DIN 7985 -4 S FOR STARTER CABLE AT MOUNTING, CONTROL SHAFT (BODY FRONT END) |
- | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR STARTER CABLE AT MOUNTING, CONTROL SHAFT (BODY FRONT END) |
- | - | - | ||
| 011 | RUBBER SLEEVE FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL |
- | A 00 099 734 81 | - | $1.11 |
CABLES |
- | XXX XXX XXX XXXX | - | - | |
| 015 | MAIN CABLE HARNESS | - | A 12 154 016 05 | - | - |
| MAIN CABLE HARNESS | - | A 12 154 017 05 | - | - | |
| 016 | HOUSING LOWER PART WITH SOCKET |
001 | A 00 054 506 28 | - | - |
| 017 | GASKET | 001 | A 00 054 500 80 | - | - |
| 018 | CABLE HARNESS FOR JACKET TUBE |
- | A 12 154 019 09 | - | - |
| CABLE HARNESS FOR JACKET TUBE |
- | A 12 154 020 09 | - | - | |
| 019 | CABLE HARNESS | 001 | A 12 154 008 07 | - | - |
| 020 | CABLE HARNESS FROM GENERATOR TO REGULATOR |
001 | A 18 054 000 08 | - | $41.76 |
| 021 | RUBBER PROTECTIVE CAP FOR TERMINAL AT GENERATOR D POS. AND DF |
002 | A 00 054 602 35 | - | - |
| INSULATING HOSE B 16X18X200 SW DIN 40621 ABOVE MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER |
001 | - | - | ||
| 023 | CABLE HARNESS FROM 2 -POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT |
001 | A 12 054 017 38 | - | - |
| 024 | BRACKET FOR CABLE HARNESS AT REVERSE DRIVE LIGHT SWITCH |
001 | A 18 054 600 43 | - | - |
| 025 | RUBBER SLEEVE FOR CABLE HARNESS AT BRACKET |
001 | A 00 099 731 81 | - | $0.98 |
| FIXING CLAMP FOR CABLE TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
- | A 18 199 500 20 | - | - | |
| LENS -HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT |
- | - | - | ||
| 026 | GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
- | A 18 654 003 41 | - | $97.85 |
| GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
- | A 12 054 000 41 | - | - | |
| 027 | SCREW WITH LOCKING PLATE FOR GROUND CABLE AT PEDAL FLOOR |
001 | A 12 042 002 27 | - | $7.40 |
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE AT PEDAL FLOOR |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR |
001 | - | - | ||
| 031 | CABLE CONNECTOR, 5 -POLE FOR CABLE HARNESS FOR TAIL LIGHTS |
002 | A 00 054 619 41 | - | - |
| 032 | CABLE CONNECTOR 5 -POLE FOR STEERING SPINDLE CABLE HARNESS |
001 | A 00 054 606 41 | - | - |
| 033 | CABLE CONNECTOR 2 -POLE FOR HEATING BLOWERS CONNECTION |
002 | A 00 054 618 41 | - | $48.92 |
| LENS -HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR, 5 -POLE AT FRONT WALL |
004 | - | - | ||
| LENS -HD. SHEET METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5 -POLE AT WHEEL ARCH PAN, STEERING SPINDLE CABLE HARNESS |
002 | - | - | ||
| LENS -HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR, 2 -POLE AT WHEEL ARCH PAN, LEFT AND RIGHT, HEATER BLOWER |
004 | - | - | ||
| 037 | RUBBER SLEEVE FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 18 199 700 81 | - | - |
| 038 | RUBBER SLEEVE FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
- | A 00 099 727 81 | - | $1.49 |
| 38a | RUBBER SLEEVE FOR BLINKER LIGHT AT WHEEL ARCH |
002 | A 00 099 722 81 | - | $0.98 |
| RUBBER SLEEVE FOR FOOT OPERATED DIMMER SWITCH |
- | A 00 099 730 81 | - | $1.79 | |
| 039 | FIXING CLAMP | - | A 00 098 833 78 | - | $0.67 |
| 040 | FIXING CLAMP | - | A 00 098 834 78 | - | $0.36 |
| FIXING CLAMP | - | A 00 098 853 78 | - | - | |
| 042 | RUBBER SLEEVE FOR FUEL TRANSMITTER CABLE |
001 | A 00 099 718 81 | - | - |
| RUBBER SLEEVE FOR LOCKING BORE, WIRE CABLE THROUGH PEDAL FLOOR |
- | A 00 098 702 44 | - | $2.27 | |
| INSULATING HOSE B 12X13,6X40 SW DIN 40621 FOR MAIN CABLE HARNESS AT WHEEL ARCH PAN ORDER BY THE METER |
002 | - | - | ||
| FIXING CLAMP FOR CABLE HARNESS FOR TAIL LIGHT AT COVER PLATE AND FOR CABLE TO HORN |
008 | A 00 098 833 78 | - | $0.67 | |
| FIXING CLAMP FOR CABLE HARNESS FOR TAIL LIGHT AT COVER PLATE AND FOR CABLE TO HORN |
005 | A 00 098 834 78 | - | $0.36 | |
| LENS -HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER AT REAR CROSS MEMBER |
001 | - | - | ||
| 056 | BRACKET FOR CABLE HARNESS FOR TAIL LIGHT, LEFT AND RIGHT |
008 | A 12 054 601 82 | - | - |
| LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT |
002 | - | - | ||
| LENS -HD. SCREW AM 4X10 DIN 7985 -4 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR GROUND CONNECTION AT LUGGAGE COMPARTMENT FOR TAIL LIGHT |
002 | - | - | ||
| 061 | CABLE COVER PLATE FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
001 | A 12 054 600 81 | - | - |
| LENS -HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER |
002 | - | - | ||
| 063 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 500 37 | - | $27.83 |
| LENS -HD. SCREW AM 4X10 DIN 7985 -4 S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LENS -HD. SCREW AM 6X15 DIN 7985 -4 S FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| 066 | CAGE CLAMP WITH NUT M 6 -6 FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 00 099 022 91 | - | - |
| 067 | RUBBER HOSE 15X17X20 ABOVE STARTER MOTOR CABLE, GENERATOR CABLE AND MAIN CABLE HARNESS ORDER BY THE METER |
NB | A 00 099 747 82 | - | - |
| 068 | FIXING CLAMP FOR MAIN CABLE HARNESS AT FRONT WALL |
001 | A 13 699 501 35 | - | - |
| 069 | FIXING CLAMP FOR STEERING SPINDLE CABLE AT FORKED SUPPORT |
001 | A 18 199 500 20 | - | - |
| LENS -HD. SHEET METAL SCREW B 4,2X9,5 DIN 7981 FOR STEERING SPINDLE CABLE AT FORKED SUPPORT |
001 | - | - | ||
| FIXING CLAMP FOR CABLE, STOP SWITCH AT BRAKE PIPE |
- | A 00 198 809 78 | - | - | |
| 071 | FUSE BOX WITH FUSE AND BRASS SCREW |
001 | A 18 054 009 50 | - | - |
| 072 | COVER FOR FUSE BOX |
001 | A 00 054 502 03 | - | $73.37 |
| FUSE 12 AMPERES 8 DIN 72581 |
011 | - | - | ||
| FUSE 35 AMPERES 25 DIN 72581 |
001 | - | - | ||
| LENS -HD. SHEET METAL SCREW BZ 4,2X19 DIN 7981 FOR FUSE BOX AT PARTITION |
002 | - | - | ||
| 076 | FIXING CLAMP FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | A 18 199 500 20 | - | - |
| LENS -HD. SCREW AM 4X10 DIN 7985 -4 S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT |
002 | - | - | ||
| 077 | FIXING CLAMP FOR CABLE TO STOP LIGHT |
- | A 15 399 503 22 | - | - |
| LENS -HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR CABLE TO STOP LIGHT |
- | - | - | ||
| 078 | FIXING CLAMP FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT AT GUTTER |
002 | A 00 098 888 78 | - | - |
| 079 | FIXING CLAMP FOR MAIN CABLE HARNESS AND BRAKE PIPE AT FRONT FRAME, CROSS MEMBER |
002 | A 12 199 500 22 | - | - |
| HEX. -HD. SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS AND BRAKE PIPE AT FRONT FRAME, CROSS MEMBER |
002 | - | - | ||
INSTRUMENTS AND SWITCHES |
- | XXX XXX XXX XXXX | - | - | |
| 080 | PUSH PULL SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - | $29.83 |
| 081 | ESCUTCHEON | 001 | A 12 054 500 72 | - | - |
| 082 | FELT RING | 001 | A 00 099 720 40 | - | $0.50 |
| 82a | BUTTON | 001 | A 12 054 012 83 | - | - |
| 083 | ROTARY PULL SWITCH, COMPLETE FOR HEADLIGHTS, FOGLIGHTS AND CLEARANCE LIGHTS |
001 | A 11 054 000 58 | - | - |
| 084 | COMBI -INSTRUMENT WITH KM GRADUATION RATIO 0.96 |
001 | A 12 154 203 01 | - | - |
| COMBI INSTRUMENT WITH MILEAGE GRADUATION RATIO 1.54 EXPORT |
001 | A 12 154 201 01 | - | - | |
| COMBI INSTRUMENT WITH KM GRADUATION RATIO 0.88 EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 12 154 208 01 | - | - | |
| COMBI INSTRUMENT WITH MILEAGE GRADUATION RATIO 1.425 EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 12 154 209 01 | - | - | |
| 085 | KILOMETER COUNTER RATIO 0.96 |
001 | A 00 154 243 06 | - | - |
| KILOMETER COUNTER RATIO 0.88 EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 00 154 278 06 | - | - | |
| MILEAGE COUNTER RATIO 1.54 EXPORT |
001 | A 00 154 242 06 | - | - | |
| MILEAGE COUNTER RATIO 1.425 EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 00 154 279 06 | - | - | |
| 086 | OIL PRESSURE GAUGE | 001 | A 00 054 271 02 | - | - |
| 087 | WATER TELETHERMOMETER, LENGTH OF CAPILLARY TUBE 1,700-MM |
001 | A 00 154 244 05 | - | - |
| 088 | FUEL GAUGE | 001 | A 00 054 244 03 | - | - |
| 089 | TENSION SPRING FOR FIXING OF COMBI INSTRUMENT |
002 | A 12 099 317 10 | - | - |
| 090 | RUBBER FRAME FOR COMBI INSTRUMENT |
001 | A 12 054 202 80 | - | - |
| 091 | LAMP SOCKET | 006 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
006 | - | - | ||
| FIXING CLAMP FOR HOUSING UPPER PART WITH LOWER PART AT GLOVE BOX COVER PLATE |
002 | A 00 098 834 78 | - | $0.36 | |
| 100 | CLOCK ELECTRIC 12 VOLT | 001 | A 12 054 206 11 | - | - |
| 101 | LAMP SOCKET | 001 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
001 | - | - | ||
| 109 | DIMMING RESISTOR FOR INSTRUMENT LIGHTING |
001 | A 00 054 508 31 | - | - |
| 110 | STARTING SWITCH |
001 | A 00 054 517 14 | - | - |
| 111 | ESCUTCHEON FOR PUSH BUTTON SWITCH |
001 | A 12 054 503 72 | - | - |
| 113 | SWITCH FOR TURN INDICATOR AND DISTANCE LIGHT BLINKER |
001 | A 00 054 587 24 | - | - |
| REVERSING SWITCH FOR TURN INDIKATOR BLINKER SPECIAL REQUEST OMISSION OF BLINKER LIGHT SYSTEM |
- | A 00 054 590 24 | - | - | |
| 114 | BLINKER LEVER KNOB, BLACK FOR DISTANCE LIGHT BLINKER SWITCH |
001 | A 18 054 504 37 | - | $30.25 |
| BLINKER LEVER KNOB, IVORY COLOURED FOR DISTANCE LIGHT BLINKER SWITCH SPECIAL REQUEST |
001 | A 18 054 505 37 | - | - | |
| 116 | BLINKER TRANSMITTER | 001 | A 00 054 423 32 | - | - |
| HEX. -HD. SCREW M 6X12 DIN 933 -8 G FOR BLINKER TRANSMITTER AT PARTITION |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BLINKER TRANSMITTER AT PARTITION |
002 | - | - | ||
| 123 | OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE |
- | A 18 054 013 60 | - | - |
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO COUPLING PIECE |
- | A 12 054 005 60 | - | - | |
| COUPLING PIECE FOR OIL PRESSURE GAUGE PIPE |
- | A 12 854 200 47 | - | - | |
| OIL PRESSURE GAUGE PIPE FROM COUPLING PIECE TO HOSE |
- | A 12 054 006 60 | - | - | |
| RUBBER HOSE 15X17X20 FOR BOX NUT TO OIL PRESSURE GAUGE PIPE ORDER BY THE METER |
- | A 00 099 747 82 | - | - | |
| RUBBER SLEEVE FOR OIL PRESSURE GAUGE PIPE AND CAPILLARY TUBE THROUGH BRACKET CUT OPEN IF REQUIRED |
- | A 18 699 706 81 | - | $1.79 | |
| SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET |
002 | - | - | ||
| HEX. NUT BM 8 DIN 439 -5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET |
001 | - | - | ||
| 127 | RUBBER HOSE 25 MM LONG FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END ORDER BY THE METER |
002 | A 00 098 700 32 | - | - |
| 128 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | A 13 699 505 01 | - | - |
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END |
002 | - | - | ||
| FIXING CLAMP FOR CAPILLARY TUBE AT FRONT WALL |
- | A 13 699 505 01 | - | - | |
| LENS-HD. SHEET METAL SCREW B 3,9X9,5 DIN 7981 FOR CAPILLARY TUBE AT FRONT WALL |
- | - | - | ||
| 130 | HOSE FOR OIL PRESSURE GAUGE PIPE |
- | A 12 854 000 59 | - | $43.69 |
| HOSE FOR OIL PRESSURE GAUGE PIPE |
- | A 12 154 002 59 | - | $84.01 | |
| 131 | STOP LIGHT SWITCH ALSO SEE GROUP 42 |
001 | A 00 054 522 09 | - | - |
| 132 | FOOT DIMMER SWITCH | 001 | A 00 054 504 12 | - | - |
| 133 | INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 13 654 501 58 | - | - |
| LENS-HD. COUNTERSUNK SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | - | ||
| 135 | CAGE CLAMP WITH NUT M 4-4 FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | A 00 099 025 91 | - | - |
| RUBBER SLEEVE FOR CABLE TO FOOT DIMMER SWITCH |
- | A 00 099 727 81 | - | $1.49 | |
| 137 | FLEXIBLE DRIVE SHAFT 1.750-MM LONG |
001 | A 12 054 203 07 | - | - |
| RUBBER SLEEVE FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL |
- | A 18 699 704 81 | - | $2.33 | |
| RUBBER SLEEVE FOR TACHOMETER SHAFT THROUGH FLOOR AND TUNNEL |
- | A 00 099 731 81 | - | $0.98 | |
| FIXING CLAMP FOR TACHOMETER SHAFT AT PEDAL FLOOR, RIGHT |
- | A 00 098 834 78 | - | $0.36 | |
| 139 | FIXING CLAMP FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
- | A 12 099 500 01 | - | - |
| LENS-HD. SCREW AM 5X10 DIN 7985 -4 S FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
- | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR FLEXIBLE DRIVE SHAFT AT BEARING, CONTROL SHAFT |
- | - | - | ||
| 142 | RUBBER SLEEVE FOR FLEXIBLE DRIVE SHAFT THROUGH FORK SUPPORT |
002 | A 18 099 712 81 | - | - |
| 143 | RUBBER SLEEVE FOR LOCKING 3RD PASSAGE OF FORK SUPPORT |
001 | A 18 098 700 44 | - | - |
| 144 | THREE ELEMENT VOLTAGE REGULATOR |
001 | A 00 015 455 06 | - | - |
| 145 | RUBBER BUSHING | 003 | A 00 015 402 50 | - | - |
| LOCK WASHER B 6 DIN 127 FOR REGULATOR AT BRACKET WHEEL ARCH PAN |
003 | - | - | ||
| LENS -HD. SCREW AM 6X20 DIN 7985 -4 S FOR REGULATOR AT BRACKET WHEEL ARCH PAN |
003 | - | - | ||
| 148 | RUBBER SLEEVE FOR CABLE VOLTAGE REGULATOR, GENERATOR |
003 | A 00 099 707 81 | - | $1.35 |
| ADDITIONAL CABLE HARNESS SPECIAL REQUEST FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA |
001 | A 12 154 017 09 | - | - | |
| INSULATING HOSE B 20X22, 4X100 SW DIN 40621 ABOVE MAIN CABLE HARNESS, LIGHT TURNING SWITCH ORDER BY THE METER SPECIAL REQUEST FOG LIGHT |
001 | - | - | ||
| FUSE BOX, 2-POLE SPECIAL REQUEST FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA |
001 | A 00 054 503 01 | - | - | |
| CYLINDRICAL SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX AT AIR DUCT, LEFT SPECIAL REQUEST FOG LIGHT SWITCHING FOR VEHICLES EXPORTED TO THE USA |
001 | - | - | ||
| 150 | HORN | 001 | A 00 154 220 20 | - | - |
| HORN SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 054 271 20 | - | - | |
| HORN SPECIAL REQUEST FOR TRIPLE -TONE SIGNAL SYSTEM |
001 | A 00 154 208 20 | - | - | |
| HORN SPECIAL REQUEST FOR TRIPLE -TONE SIGNAL SYSTEM |
001 | A 00 054 246 20 | - | - | |
| HEX. -HD. SCREW M 10X28 DIN 931 -8 G FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE -TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE -TONE SIGNAL SYSTEM |
002 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET SPECIAL REQUEST FOR TRIPLE -TONE SIGNAL SYSTEM |
002 | - | - | ||
| HEX. -HD. SCREW M 10X28 DIN 931-8 G FOR HORN AT BRACKET |
001 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR HORN AT BRACKET |
001 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR HORN AT BRACKET |
001 | - | - | ||
| BRACKET FOR HORN AT CROSS TUBE, FRONT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 10 120 612 00 31 | - | - | |
| BRACKET FOR HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 034 204 40 | - | - | |
| HEX. -HD. SCREW M 6X15 DIN 933-8 G FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
004 | - | - | ||
| CYLINDRICAL SCREW AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT HORN |
002 | - | - | ||
| CYLINDRICAL SCREW AM 4X8 DIN 84-4 S FOR CABLE CONNECTION AT HORN |
002 | - | - | ||
| 160 | IGNITION COIL | 001 | A 00 015 800 03 | - | - |
| 161 | FIXING CLAMP FOR IGNITION COIL |
001 | A 00 015 802 40 | - | - |
| CYLINDRICAL SCREW AM 5X40 DIN 84-4 S |
001 | - | - | ||
| FLAT SQUARE NUT M 5 DIN 562 |
001 | - | - | ||
| HEX. -HD. SCREW M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| 167 | RUBBER PROTECTIVE CAP FOR IGNITION COIL |
002 | A 00 054 602 35 | - | - |
| CONTACTOR SPECIAL REQUEST FOR TRIPLE -TONE SIGNAL SYSTEM AND BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
001 | A 00 054 227 19 | - | - | |
| PUSH-PULL SWITCH FOR 3RD HORN SPECIAL REQUEST FOR TRIPLE -TONE SIGNAL SYSTEM |
001 | A 00 054 506 11 | - | $29.83 | |
| ESCUTCHEON SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 054 500 72 | - | - | |
| FELT RING SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 00 099 720 40 | - | $0.50 | |
| BUTTON SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 054 012 83 | - | - | |
| ADDITIONAL CABLE HARNESS SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 006 09 | - | - | |
| ADDITIONAL CABLE HARNESS FROM 2ND TO 3RD HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 005 09 | - | - | |
| ELECTRICAL CABLE FROM FUSE BOX TO RELAY TERMINAL 30/51 SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 001 38 | - | - | |
| ELECTRICAL CABLE FROM RELAY TERMINAL 87 TO 2ND HORN SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 002 38 | - | - | |
| GROUND CABLE FROM 2ND HORN TO GROUND SPECIAL REQUEST FOR TRIPLE-TONE SIGNAL SYSTEM |
001 | A 12 154 003 38 | - | - | |
| ELECTRICAL CABLE, BLACK 80-MM LONG B 1 DIN 72551 FROM RELAY TERMINAL 30 TO RELAY TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CAR |
001 | - | - | ||
| CABLE TERMINAL 4X0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | - | - | ||
| RUBBER SLEEVE SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL |
005 | A 00 099 701 81 | - | $0.47 | |
| SOCKET FOR HAND LIGHT SPECIAL REQUEST |
001 | A 00 054 505 25 | - | $11.93 | |
| ELECTRICAL CABLE, BLACK 1.000-MM LONG A 1 DIN 72551 ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| INSULATING HOSE, BLACK 950-MM LONG B 3X3,8 DIN 40621 ORDER BY THE METER SPECIAL REQUEST |
001 | - | - | ||
| BRACKET FOR FUSE BOX SPECIAL REQUEST |
001 | A 12 054 511 95 | - | - | |
| CYLINDRICAL SCREW AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST |
002 | - | - |
- To find out where to buy the item or equivalent, click on the part number.