Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 121.010 - MOVING PARTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
CRANKSHAFT |
- | XXX XXX XXX XXXX | - | - | |
| CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL, CRANKSHAFT BEARING SHELLS AND CONNECTING ROD BEARING SHELLS MAKE LAUCHERTHAL OPTIONAL |
001 | A 12 103 037 01 | - | - | |
| CRANKSHAFT WITH COUNTERWEIGHT, FLYWHEEL, CRANKSHAFT BEARING SHELLS AND CONNECTING ROD BEARING SHELLS MAKE GLYCO OPTIONAL |
001 | A 12 103 039 01 | - | - | |
| 001 | CRANKSHAFT WITH COUNTERWEIGHT AND FLYWHEEL |
001 | A 12 103 035 01 | - | - |
| 002 | SHIM, 5.45 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT |
001 | A 18 003 100 52 | - | - |
| SHIM, 5.60 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT |
001 | A 18 003 101 52 | - | $24.04 | |
| SHIM, 5.75 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT |
001 | A 18 003 102 52 | - | $24.04 | |
| SHIM, 5.90 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT |
001 | A 18 003 103 52 | - | - | |
| SHIM, 6.05 MM THICK OPTIONAL FOR CRANKSHAFT GEAR AT CRANKSHAFT |
001 | A 18 003 104 52 | - | - | |
| WOODRUFF KEY 5X7,5 DIN 6888 FOR CRANKSHAFT GEAR |
001 | - | - | ||
| 004 | CRANKSHAFT GEAR ON CRANKSHAFT, FRONT |
001 | A 18 005 202 03 | - | - |
| 005 | OIL SLINGER RING ON CRANKSHAFT, FRONT |
001 | A 18 003 104 25 | - | - |
| 006 | COUNTERWEIGHT | 001 | A 12 103 103 07 | - | - |
| 007 | SPACER RING FOR CRANKSHAFT, OIL SLINGER RING |
001 | A 12 103 100 51 | - | - |
| CYLINDR. PIN 8 H8X8 DIN 7 FOR COUNTERWEIGHT AT CRANKSHAFT |
001 | - | - | ||
| CYLINDR. PIN 8 H8X16 DIN 7 FOR COUNTERWEIGHT AT CRANKSHAFT |
001 | - | - | ||
| 008 | FLYWHEEL WITH | 001 | A 12 103 008 05 | - | $473.55 |
| 009 | STARTER RING | 001 | A 12 103 200 05 | - | - |
| 010 | NECKED-DOWN BOLT FOR FLYWHEEL AT CRANKSHAFT |
006 | A 12 103 106 71 | - | - |
| CYLINDR. PIN 10 H8X18 DIN 7 FOR FLYWHEEL AT CRANKSHAFT |
001 | - | - | ||
| 013 | COLLAR SCREW | 001 | A 18 603 102 71 | - | - |
| 014 | SEALING RING AT CRANKSHAFT, FRONT |
001 | A 12 003 101 81 | - | - |
| 14a | ADJUSTING NEEDLE FOR TOP DEAD CENTER ADJUSTING |
001 | A 12 103 200 15 | - | $6.56 |
| CYLINDR. SCREW AM 6X8 DIN 84-4 S FOR FIXING OF ADJUSTING NEEDLE |
001 | - | - | ||
| 015 | PULLEY | 001 | A 12 120 001 05 | - | $234.91 |
| 016 | GROOVED BEARING 6202 DIN 625 FOR DRIVE SHAFT AT CRANKSHAFT |
001 | - | - | |
| 017 | LOCKING RING FOR DRIVE SHAFT AT CRANKSHAFT |
001 | A 18 603 100 33 | - | - |
| 018 | FABRIC SEALING RING 75 X 87 X 6 GL N 255 A FOR CRANKSHAFT SEALING IN CYLINDER CRANKCASE, REAR |
001 | - | - | |
CRANKSHAFT BEARING |
- | XXX XXX XXX XXXX | - | - | |
| 020 | SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 70-MM = STANDARD (MAKE GLYCO) OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 005 97 | - | - |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 70-MM = STANDARD (MAKE LAUCHERTHAL) OPTIONAL READY FOR INSTALLATION |
001 | A 62 103 000 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 70-MM = STANDARD (MAKE VANDERVELL) OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 010 97 | - | - | |
| 021 | CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B |
004 | A 12 103 314 01 | - | - |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE |
004 | A 62 103 300 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CEN |
004 | A 12 103 319 01 | - | - | |
| 022 | CRANKSHAFT BEARING SHELL MAKE GLYCO WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 314 02 | - | - |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 62 103 300 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 319 02 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.75-MM = REPAIR SIZE I MAKE GLYCO OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 006 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.75-MM = REPAIR SIZE I MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION |
001 | A 62 103 001 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.75-MM = REPAIR SIZE I MAKE VANDERVELL OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 011 97 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B |
004 | A 12 103 315 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE |
004 | A 62 103 301 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CEN |
004 | A 12 103 320 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 315 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 62 103 301 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 320 02 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.50-MM = REPAIR SIZE II MAKE GLYCO OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 007 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.50-MM = REPAIR SIZE II MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION |
001 | A 62 103 002 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.50-MM = REPAIR SIZE II MAKE VANDERVELL OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 012 97 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B |
004 | A 12 103 316 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE |
004 | A 62 103 302 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CEN |
004 | A 12 103 321 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 316 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 62 103 302 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 321 02 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.25-MM = REPAIR SIZE III MAKE GLYCO OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 008 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.25-MM = REPAIR SIZE III MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION |
001 | A 62 103 003 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.25-MM = REPAIR SIZE III MAKE VANDERVELL OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 013 97 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B |
004 | A 12 103 317 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE |
004 | A 62 103 303 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CEN |
004 | A 12 103 322 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 317 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 62 103 303 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 322 02 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.00-MM = REPAIR SIZE IV MAKE GLYCO OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 009 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.00-MM = REPAIR SIZE IV MAKE LAUCHERTHAL OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 004 97 | - | - | |
| SET OF CRANKSHAFT BEARING SHELLS, INNER DIA. 69.00-MM = REPAIR SIZE IV MAKE VANDERVELL OPTIONAL READY FOR INSTALLATION |
001 | A 12 103 014 97 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CENTER B |
004 | A 12 103 318 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CE |
004 | A 62 103 304 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITH GROOVE; USED AS UPPER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING, USED AS UPPER AND LOWER HALF FOR CEN |
004 | A 12 103 323 01 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE GLYCO WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 318 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE LAUCHERTHAL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 62 103 304 02 | - | - | |
| CRANKSHAFT BEARING SHELL MAKE VANDERVELL WITHOUT GROOVE; USED AS LOWER HALF FOR 1ST AND 3RD CRANKSHAFT BEARING OPTIONAL |
002 | A 12 103 323 02 | - | - | |
CONNECTING ROD |
- | XXX XXX XXX XXXX | - | - | |
| 025 | CONNECTING ROD | 004 | A 12 103 015 20 | - | $284.81 |
| 026 | CONNECTING ROD BUSHING | 004 | A 18 603 807 50 | - | $31.03 |
| 027 | CONNECTING SCREW | 008 | A 12 103 803 71 | - | $27.27 |
| 028 | NUT | 008 | A 18 203 800 72 | - | $8.73 |
| CONNECTING ROD BUSHING, OUTER DIA. 28.5 REPAIR DESIGN |
004 | A 18 603 808 50 | - | $35.02 | |
| 029 | CONNECTING ROD BEARING SHELL, INNER DIA. 52.00 = STANDARD MAKE GLYCO OPTIONAL |
008 | A 12 103 828 10 | - | - |
| CONNECTING ROD BEARING SHELL, INNER DIA. 52.00 = STANDARD MAKE LAUCHERTHAL OPTIONAL |
008 | A 12 103 807 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 52.00 = STANDARD MAKE VANDERVELL OPTIONAL |
008 | A 12 103 833 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.75 = REPAIR SIZE I MAKE GLYCO OPTIONAL |
008 | A 12 103 829 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.75 = REPAIR SIZE I MAKE LAUCHERTHAL OPTIONAL |
008 | A 12 103 808 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.75 = REPAIR SIZE I MAKE VANDERVELL OPTIONAL |
008 | A 12 103 834 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.50 = REPAIR SIZE II MAKE GLYCO OPTIONAL |
008 | A 12 103 830 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.50 = REPAIR SIZE II MAKE LAUCHERTHAL OPTIONAL |
008 | A 12 103 809 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.50 = REPAIR SIZE II MAKE VANDERVELL OPTIONAL |
008 | A 12 103 835 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.25 = REPAIR SIZE III MAKE GLYCO OPTIONAL |
008 | A 12 103 831 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.25 = REPAIR SIZE III MAKE LAUCHERTHAL OPTIONAL |
008 | A 12 103 810 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.25 = REPAIR SIZE III MAKE VANDERVELL OPTIONAL |
008 | A 12 103 836 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.00 = REPAIR SIZE IV MAKE GLYCO OPTIONAL |
008 | A 12 103 832 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.00 = REPAIR SIZE IV MAKE LAUCHERTHAL OPTIONAL |
008 | A 12 103 811 10 | - | - | |
| CONNECTING ROD BEARING SHELL, INNER DIA. 51.00 = REPAIR SIZE IV MAKE VANDERVELL OPTIONAL |
008 | A 12 103 837 10 | - | - | |
PISTON |
- | XXX XXX XXX XXXX | - | - | |
| 034 | PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 85.00 = STANDARD MAKE MAHLE OPTIONAL |
004 | A 12 103 002 17 | - | $232.69 |
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 85.00 = STANDARD MAKE NÜRAL OPTIONAL |
004 | A 12 103 008 17 | - | - | |
| 035 | COMPRESSION RING FOR GROOVE I |
004 | A 00 103 738 16 | - | - |
| 036 | TAPERED RING FOR GROOVE II |
004 | A 00 103 743 16 | - | - |
| 037 | NOVIX STEPPED RING FOR GROOVE III |
004 | A 00 003 700 17 | - | - |
| 038 | NOVIX SLOTTED RING FOR GROOVE IV |
004 | A 00 003 729 18 | - | - |
| 039 | PISTON PIN D 25X18X72 DIN 73121 K |
004 | - | - | |
| WIRE SNAP RING A 25 DIN 73123 |
008 | - | - | ||
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 85.25 = REPAIR SIZE I MAKE MAHLE OPTIONAL |
004 | A 12 103 003 17 | - | - | |
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 85.25 = REPAIR SIZE I MAKE NÜRAL OPTIONAL |
004 | A 12 103 009 17 | - | - | |
| COMPRESSION RING FOR GROOVE I |
004 | A 00 103 739 16 | - | - | |
| TAPERED RING FOR GROOVE II |
004 | A 00 103 744 16 | - | - | |
| NOVIX STEPPED RING FOR GROOVE III |
004 | A 00 003 711 17 | - | - | |
| NOVIX SLOTTED RING FOR GROOVE IV |
004 | A 00 003 769 18 | - | - | |
| PISTON PIN D 25 X 18 X 72 DIN 73121 K |
004 | - | - | ||
| WIRE SNAP RING A 25 DIN 73123 |
008 | - | - | ||
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 85.50 = REPAIR SIZE II MAKE MAHLE OPTIONAL |
004 | A 12 103 004 17 | - | - | |
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 85.50 = REPAIR SIZE II MAKE NÜRAL OPTIONAL |
004 | A 12 103 010 17 | - | $232.69 | |
| COMPRESSION RING FOR GROOVE I |
004 | A 00 103 740 16 | - | - | |
| TAPERED RING FOR GROOVE II |
004 | A 00 103 745 16 | - | - | |
| NOVIX STEPPED RING FOR GROOVE III |
004 | A 00 003 701 17 | - | - | |
| NOVIX SLOTTED RING FOR GROOVE IV |
004 | A 00 003 736 18 | - | - | |
| PISTON PIN D 25 X 18 X 72 DIN 73121 K |
004 | - | - | ||
| WIRE SNAP RING A 25 DIN 73123 |
008 | - | - | ||
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 86.00 = REPAIR SIZE III MAKE MAHLE OPTIONAL |
004 | A 12 103 005 17 | - | $232.69 | |
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 86.00 = REPAIR SIZE III MAKE NÜRAL OPTIONAL |
004 | A 12 103 011 17 | - | - | |
| COMPRESSION RING FOR GROOVE I |
004 | A 00 103 741 16 | - | - | |
| TAPERED RING FOR GROOVE II |
004 | A 00 103 746 16 | - | - | |
| NOVIX STEPPED RING FOR GROOVE III |
004 | A 00 003 702 17 | - | - | |
| NOVIX SLOTTED RING FOR GROOVE IV |
004 | A 00 003 737 18 | - | - | |
| PISTON PIN D 25 X 18 X 72 DIN 73121 K |
004 | - | - | ||
| WIRE SNAP RING A 25 DIN 73123 |
008 | - | - | ||
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 86.50 = REPAIR SIZE IV MAKE MAHLE OPTIONAL |
004 | A 12 103 006 17 | - | $232.69 | |
| PISTON WITH PISTON PIN AND PISTON RINGS, CYLINDER DIA. 86.50 = REPAIR SIZE IV MAKE NÜRAL OPTIONAL |
004 | A 12 103 012 17 | - | - | |
| COMPRESSION RING FOR GROOVE I |
004 | A 00 103 742 16 | - | - | |
| TAPERED RING FOR GROOVE II |
004 | A 00 103 747 16 | - | - | |
| NOVIX STEPPED RING FOR GROOVE III |
004 | A 00 003 703 17 | - | - | |
| NOVIX SLOTTED RING FOR GROOVE IV |
004 | A 00 003 738 18 | - | - | |
| PISTON PIN D 25 X 18 X 72 DIN 73121 K |
004 | - | - | ||
| WIRE SNAP RING A 25 DIN 73123 |
008 | - | - |
- To find out where to buy the item or equivalent, click on the part number.