Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 121.111 - HEATING AND VENTILATION Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
HEATING AND VENTILATION |
- | XXX XXX XXX XXXX | - | - | |
| 001 | AIR DUCT, LEFT | 001 | A 10 120 830 17 62 | - | - |
| 002 | AIR DUCT, RIGHT | 001 | A 10 120 830 04 62 | - | - |
| 003 | FLAP FOR AIR DUCT |
002 | A 10 120 831 00 43 | - | - |
| 004 | AXLE FOR AIR FLAP |
002 | A 10 120 831 00 48 | - | - |
| 005 | BEARING BUSHING | 002 | A 10 120 831 00 82 | - | - |
| 006 | LEVER | 002 | A 10 120 831 00 33 | - | - |
| THREADED PIN M 4X6 DIN 553-5 S FOR LEVER AT SHAFT |
002 | - | - | ||
| WASHER 5,3 DIN 125 FOR AXLE AT AIR DUCT |
002 | - | - | ||
| HEX. NUT AM 5 DIN 439-5 S FOR AXLE AT AIR DUCT |
004 | - | - | ||
| 010 | TIGHTENING STRAP FOR AIR DUCT |
002 | A 10 120 830 01 29 | - | - |
| LENS-HD. SCREW AM 6X22 DIN 7985-4 S FOR TIGHTENING STRAP AT AIR DUCT |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR TIGHTENING STRAP AT AIR DUCT |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR TIGHTENING STRAP AT AIR DUCT |
002 | - | - | ||
| 011 | HEAT EXCHANGER, LEFT | 001 | A 10 120 835 05 01 | - | - |
| 012 | HEAT EXCHANGER, RIGHT | 001 | A 10 120 835 06 01 | - | - |
| 12a | CONTROL VALVE, LEFT | 001 | A 12 083 501 20 | - | - |
| 12b | CONTROL VALVE, RIGHT | 001 | A 12 083 502 20 | - | - |
| 013 | GASKET O-RING IN CONTROL VALVE, LEFT AND RIGHT |
002 | A 00 083 500 98 | - | - |
| INTERMEDIATE LAYER FOR HEAT EXCHANGER MOLTOPREN, 12 MM THICK Replaced by: A 000 983 02 98 |
- | A 10 120 831 01 93 | - | - | |
| INTERMEDIATE LAYER FOR HEAT EXCHANGER MOLTOPREN, 12 MM THICK ORDER BY THE METER |
002 | A 00 098 302 98 | - | - | |
| 016 | BRACKET FOR BOWDEN CABLE-HEATING |
002 | A 12 083 000 50 | - | - |
| 017 | SEALING RUBBER FOR HEAT EXCHANGER AND BRACKET AT AIR DUCT |
002 | A 10 120 835 00 92 | - | - |
| LENS-HEAD SHEET METAL SCREW B 4,8X19 DIN 7981 FOR HEAT EXCHANGER AND BRACKET AT AIR DUCT |
004 | - | - | ||
| LENS-HEAD SHEET METAL SCREW B 4,8X22 DIN 7981 FOR HEAT EXCHANGER AND BRACKET AT AIR DUCT |
004 | - | - | ||
| REPLACED BY 1,25 Ø DIN 2076 |
- | A 10 120 833 01 31 | - | - | |
| 018 | WIRE 440 MM LONG 1,25 Ø DIN 2076 FOR AIR FLAP ORDER BY THE METER |
002 | - | - | |
| 019 | WIRE SPIRAL, 345 MM LONG FOR FLAP ORDER BY THE METER |
002 | A 00 098 801 72 | - | - |
| 020 | INSULATING HOSE 300-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER |
002 | - | - | |
| 021 | FIXING SCREW FOR WIRE CABLE AT FLAP |
002 | A 12 136 831 00 89 | - | - |
| 022 | BUSHING FOR WIRE CABLE AT FLAP |
002 | A 12 136 831 00 90 | - | - |
| WASHER 4,3 DIN 433 FOR WIRE CABLE AT FLAP |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR WIRE CABLE AT FLAP |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR WIRE CABLE AT FLAP |
002 | - | - | ||
| 023 | FIXING CLAMP FOR WIRE CABLE AT AIR DUCT |
002 | A 13 699 506 01 | - | $12.65 |
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR WIRE CABLE AT AIR DUCT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR WIRE CABLE AT AIR DUCT |
002 | - | - | ||
| HEX. NUT M 4 DIN 934 - 5 S FOR WIRE CABLE AT AIR DUCT |
002 | - | - | ||
| WIRE CABLE, LEFT FOR CONTROL COCK Replaced by: A 40 121 833 03 31 |
- | A 10 120 833 03 31 | - | - | |
| 025 | WIRE CABLE, LEFT FOR CONTROL COCK |
- | A 40 121 833 03 31 | - | - |
| WIRE CABLE, RIGHT FOR CONTROL COCK Replaced by: A 40 121 833 04 31 |
- | A 10 120 833 04 31 | - | - | |
| 026 | WIRE CABLE, RIGHT FOR CONTROL COCK |
001 | A 40 121 833 04 31 | - | - |
| 027 | WIRE SPIRAL, 525 MM LONG ORDER BY THE METER |
002 | A 00 098 801 72 | - | - |
| 028 | INSULATING HOSE, 480-MM LONG B 5X6,2 SW DIN 40621 ORDER BY THE METER |
002 | - | - | |
| LOCKING WASHER 4 DIN 6799 FOR WIRE CABLE AT CONTROL COCK |
002 | - | - | ||
| 029 | FIXING CLAMP FOR WIRE CABLE AT HEAT EXCHANGER |
002 | A 13 699 506 01 | - | $12.65 |
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR WIRE CABLE AT HEAT EXCHANGER |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR WIRE CABLE AT HEAT EXCHANGER |
002 | - | - | ||
| HEX. NUT M 4 DIN 934 - 5 S FOR WIRE CABLE AT HEAT EXCHANGER |
002 | - | - | ||
| 035 | HOSE FOR FEED PIPE, 175-MM LONG FROM PIPE LINE TO HEAT EXCHANGER, BOTTOM |
002 | A 10 120 831 00 94 | - | - |
| 036 | HOSE FOR RETURN FLOW PIPE, 80-MM LONG FROM PIPE LINE TO HEAT EXCHANGER, TOP |
002 | A 10 120 831 01 94 | - | - |
| HOSE STRAP 5X0,35X210 MM LANG N 263 FOR HOSE AT HEAT EXCHANGER, TOP AND BOTTOM ORDER BY THE METER |
004 | - | - | ||
| HOSE CLAMP WSN 5 N 262 FOR HOSE AT HEAT EXCHANGER, TOP AND BOTTOM ORDER BY THE METER |
004 | - | - | ||
| 038 | SEALING RUBBER BETWEEN BODY FRONT END AND AIR DUCT |
002 | A 10 120 831 05 99 | - | - |
| LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR AIR DUCT AT BODY FRONT END |
006 | - | - | ||
| WASHER 6,4 DIN 125 FOR AIR DUCT AT BODY FRONT END |
008 | - | - | ||
| HEX. -HD. SCREW M 6X65 DIN 931-8 G FOR AIR DUCT AT BODY FRONT END |
001 | - | - | ||
| HEX. -HD. SCREW M 6X60 DIN 931-8 G FOR AIR DUCT AT BODY FRONT END |
001 | - | - | ||
| HEX. -HD. SCREW M 6X60 DIN 931-8 G FOR AIR DUCT AT BODY FRONT END |
002 | - | - | ||
| 040 | OPERATION, LEFT FOR HEATING AND AIR CONTROL |
001 | A 10 120 830 11 33 | - | - |
| 041 | OPERATION, RIGHT FOR HEATING AND AIR CONTROL |
001 | A 10 120 830 12 33 | - | - |
| 042 | FIXING CLAMP | 004 | A 13 699 506 01 | - | $12.65 |
| HEX. -HD. SCREW M 4X15 DIN 931-8 G FOR FIXING CLAMP AT OPERATION |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR FIXING CLAMP AT OPERATION |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR FIXING CLAMP AT OPERATION |
002 | - | - | ||
| HEX. -HD. SCREW M 4X12 DIN 933-8 G FOR OPERATION, MOUNTING ANGLE AT INSTRUMENT PANEL |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR OPERATION, MOUNTING ANGLE AT INSTRUMENT PANEL |
004 | - | - | ||
| CAGE CLIP WITH NUT FOR OPERATION, MOUNTING ANGLE AT INSTRUMENT PANEL |
004 | A 00 099 025 91 | - | - | |
| 043 | BEARING, LEFT FOR OPERATION LEVER, HEATING OPERATION |
001 | A 12 083 301 14 | - | - |
| BEARING, RIGHT FOR OPERATION LEVER, HEATING OPERATION |
001 | A 12 083 302 14 | - | - | |
| HEX. HEAD SCREW M 4X12 DIN 933-8 G FOR BEARING AT JACKET PLATE, GLOVE BOX |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR BEARING AT JACKET PLATE, GLOVE BOX |
004 | - | - | ||
| 045 | HANDLE FOR OPERATION OF HEATING AND VENTILATION |
004 | A 10 180 830 00 36 | - | - |
| 046 | RUBBER SLEEVE | 004 | A 10 180 833 00 91 | - | - |
| 047 | RUBBER SLEEVE FOR WIRE CABLE, CONTROL COCK THROUGH FRONT WALL |
002 | A 18 099 708 81 | - | $2.76 |
| 048 | FIXING SCREW FOR WIRE CABLE, FLAP AT OPERATING LEVER |
002 | A 12 136 831 00 89 | - | - |
| 049 | BUSHING FOR WIRE CABLE, FLAP AT OPERATING LEVER |
002 | A 13 607 200 50 | - | $10.88 |
| WASHER 4,3 DIN 433 FOR WIRE CABLE, FLAP AT OPERATING LEVER |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR WIRE CABLE, FLAP AT OPERATING LEVER |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR WIRE CABLE, FLAP AT OPERATING LEVER |
002 | - | - | ||
| FIXING SCREW FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER |
002 | A 12 136 831 00 89 | - | - | |
| BUSHING FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER |
002 | A 13 607 200 50 | - | $10.88 | |
| WASHER 4,3 DIN 433 FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER |
002 | - | - | ||
| HEX. NUT M 4 DIN 934 - 5 S FOR WIRE CABLE, CONTROL COCK AT OPERATING LEVER |
002 | - | - | ||
| 055 | ANNULAR NOZZLE, LEFT FOR AIR OUTLET, VENTILATION OF SIDE WINDOWS |
001 | A 10 120 830 07 54 | - | - |
| 056 | ANNULAR NOZZLE, RIGHT FOR AIR OUTLET, VENTILATION OF SIDE WINDOWS |
001 | A 10 120 830 08 54 | - | - |
| FLAP NO LONGER DELIVERED AS SPARE PART |
- | A 10 120 831 00 24 | - | - | |
| PIN NO LONGER DELIVERED AS SPARE PART |
- | A 10 180 831 00 15 | - | - | |
| PRESSURE SPRING NO LONGER DELIVERED AS SPARE PART |
- | A 10 186 831 00 34 | - | - | |
| LOCKING WASHER 2,3 DIN 6799 NO LONGER DELIVERED AS SPARE PART |
- | - | - | ||
| 060 | WIRE CLAMP FOR ANNULAR NOZZLE AT INSTRUMENT PANEL |
002 | A 10 120 831 00 32 | - | - |
| 061 | TENSION SPRING FOR ANNULAR NOZZLE AT INSTRUMENT PANEL |
002 | A 12 099 316 10 | - | - |
| 062 | HOSE FROM AIR DUCT TO DEFROSTER NOZZLE |
002 | A 10 120 831 03 88 | - | - |
| 063 | HOSE FROM ANNULAR NOZZLE TO DEFROSTER NOZZLE |
002 | A 10 120 831 01 88 | - | - |
| 064 | TRANSFER FITTING FROM DEFROSTER NOZZLE TO HOSE FOR VENTILATION OF SIDE WINDOW |
002 | A 10 120 831 00 26 | - | - |
| 070 | CONTROL FLAP FOR CROSS DUCT, LEFT AND RIGHT FOR HEATING AND VENTILATION AT FRONT WALL, BOTTOM, INSIDE |
002 | A 10 120 830 05 42 | - | - |
| 071 | SPRING FOR CONTROL FLAP |
002 | A 10 120 831 00 34 | - | - |
| CLIP NUT | 004 | A 00 099 406 45 | - | $0.67 | |
| LENS-HD. SHEET METAL SCREW B 4,8X13 DIN 7981 FOR CONTROL FLAP AT CROSS DUCT |
004 | - | - | ||
| 072 | FEED PIPE | 001 | A 10 120 830 01 15 | - | - |
| 073 | RETURN FLOW PIPE | 001 | A 12 183 000 16 | - | - |
| BRACKET FOR FEED PIPE AND RETURN FLOW PIPE AT BODY FRONT END |
001 | A 18 083 001 14 | - | - | |
| FIXING CLAMP FOR FEED PIPE AND RETURN FLOW PIPE AT BODY FRONT END Replaced by: A 10 120 830 00 68 |
- | A 10 120 830 01 68 | - | - | |
| 075 | FIXING CLAMP FOR FEED PIPE AND RETURN FLOW PIPE AT BODY FRONT END |
001 | A 10 120 830 00 68 | - | - |
| LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR FIXING CLAMP AT BODY FRONT END |
002 | - | - | ||
| LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR FIXING CLAMP AT BODY FRONT END |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR FIXING CLAMP AT BODY FRONT END |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR FIXING CLAMP AT BODY FRONT END |
001 | - | - | ||
| BRACKET FOR HEATING TUBE |
001 | A 10 180 830 08 50 | - | - | |
| COUNTERSUNK SCREW AM 6X15 DIN 7987-4 S FOR BRACKET AT BODY FRONT END |
001 | - | - | ||
| HOSE STRAP 5X0,35X210 MM LANG N 263 FOR FEED PIPE AND RETURN FLOW PIPE AT HOSE, HEAT EXCHANGER ORDER BY THE METER |
004 | - | - | ||
| HOSE CLAMP WSN 5 N 262 FOR FEED PIPE AND RETURN FLOW PIPE AT HOSE, HEAT EXCHANGER |
004 | - | - | ||
| HOSE FOR FEED FLOW TO ENGINE, OR FOR RETURN FLOW TO ENGINE, RESP. Replaced by: A 10 120 831 01 97 |
- | A 10 180 831 00 97 | - | - | |
| 076 | HOSE FOR FEED FLOW TO ENGINE, OR FOR RETURN FLOW TO ENGINE, RESP. |
002 | A 10 120 831 01 97 | - | - |
| HOSE STRAP 5X0,35X230 MM LANG N 263 FOR HOSES AT ENGINE, FEED AND RETURN FLOW PIPE ORDER BY THE METER |
004 | - | - | ||
| HOSE CLAMP WSN 5 N 262 FOR HOSES AT ENGINE, FEED AND RETURN FLOW PIPE |
004 | - | - | ||
| 080 | SCOOP, LEFT | 001 | A 10 120 830 03 01 | - | - |
| 081 | SCOOP, RIGHT | 001 | A 10 120 830 04 01 | - | - |
| 083 | INSECT SCREEN, LEFT AND RIGHT |
002 | A 10 120 830 07 18 | - | - |
| LENS-HD. SHEET METAL SCREW B 4,8X16 DIN 7981 FOR INSECT SCREEN AT SCOOP, FRONT |
002 | - | - | ||
| WASHER 5,3 DIN 125 FOR INSECT SCREEN AT SCOOP, FRONT |
002 | - | - | ||
| 084 | CLIP NUT FOR INSECT SCREEN AT SCOOP, FRONT |
002 | A 00 099 407 45 | - | - |
| HEX. -HD. SCREW M 6X15 DIN 933-8 G FOR SCOOP AT WHEEL ARCH |
002 | - | - | ||
| 085 | RUBBER WASHER FOR SCOOP AT WHEEL ARCH |
002 | A 00 098 702 41 | - | $5.06 |
| 086 | WASHER FOR SCOOP AT WHEEL ARCH |
002 | A 12 054 501 76 | - | - |
| LOCK WASHER B 6 DIN 127 FOR SCOOP AT WHEEL ARCH |
002 | - | - | ||
| 087 | CAGE CLIP WITH NUT AT WHEEL ARCH |
002 | A 00 099 022 91 | - | - |
BLOWER-SECOND BLOWER-SPECIAL REQUEST |
- | XXX XXX XXX XXXX | - | - | |
| 090 | BLOWER MAKE AVOG OPTIONAL WITH MAKE BOSCH |
001 | A 11 120 830 02 08 | - | - |
| 091 | CARBON BRUSH | 002 | A 00 083 501 75 | - | - |
| 092 | FAN | 001 | A 10 120 835 01 85 | - | - |
| 093 | RUBBER MOUNTING FOR FIXING BLOWER |
003 | A 10 120 835 01 28 | - | - |
| BLOWER MAKE BOSCH OPTIONAL WITH MAKE AVOG |
001 | A 12 083 000 08 | - | - | |
| FAN | 001 | A 00 083 501 85 | - | - | |
| CARBON BRUSH | 002 | A 00 083 504 75 | - | - | |
| LENS-HD. SCREW AM 5X15 DIN 7985-4S FOR BLOWER IN SCOOP |
003 | - | - | ||
| WASHER 5,3 DIN 433 FOR BLOWER IN SCOOP |
003 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR BLOWER IN SCOOP |
003 | - | - | ||
| 094 | RUBBER SLEEVE IN CONNECTION FITTING FOR CABLE PASSAGE |
001 | A 12 099 703 81 | - | - |
ORNAMENTAL BARS |
- | XXX XXX XXX XXXX | - | - | |
| 100 | ORNAMENTAL BAR FOR AIR INLET, TOP, LEFT FRONT AT ENGINE HOOD |
001 | A 10 121 838 07 36 | - | - |
| 101 | ORNAMENTAL BAR FOR AIR INLET, TOP, RIGHT FRONT AT ENGINE HOOD |
001 | A 10 121 838 08 36 | - | - |
| LENS-HD. SHEET METAL SCREW B 2,9X6,5 DIN 7981 VERCHROMT FOR ORNAMENTAL BAR AT ENGINE HOOD |
004 | - | - | ||
| 103 | ORNAMENTAL BAR, CENTER, LEFT FOR AIR INLET, FRONT, BESIDE RADIATOR GRILL |
001 | A 10 121 838 09 36 | - | - |
| 104 | ORNAMENTAL BAR, CENTER, RIGHT FOR AIR INLET, FRONT, BESIDE RADIATOR GRILL |
001 | A 10 121 838 10 36 | - | - |
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE |
002 | - | - | ||
| WASHER A 4,3 DIN 9021 FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE |
002 | - | - | ||
| HEX. NUT M 4 DIN 934 - 5 S FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, OUTSIDE |
002 | - | - | ||
| LENS-HD. SCREW AM 4X18 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER |
002 | - | - | ||
| WASHER FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER |
002 | A 00 098 411 55 | - | - | |
| LOCK WASHER B 4 DIN 127 FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER |
002 | - | - | ||
| HEX. NUT M 4 DIN 934 - 5 S FOR ORNAMENTAL BAR, CENTER AT COVER PLATE, CENTER |
002 | - | - | ||
| 105 | ORNAMENTAL BAR, BOTTOM, LEFT FOR AIR INLET, FRONT BESIDE RADIATOR GRILL |
001 | A 10 121 838 11 36 | - | - |
| 106 | ORNAMENTAL BAR, BOTTOM, RIGHT FOR AIR INLET, FRONT BESIDE RADIATOR GRILL |
001 | A 10 121 838 12 36 | - | - |
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE |
002 | - | - | ||
| WASHER A 4,3 DIN 9021 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, OUTSIDE |
002 | - | - | ||
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER |
002 | - | - | ||
| WASHER A 4,3 DIN 125 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR ORNAMENTAL BAR, BOTTOM AT COVER PLATE, CENTER |
002 | - | - | ||
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S VERCHROMT FOR ORNAMENTAL BAR, BOTTOM AT REINFORCEMENT BRACKET |
004 | - | - | ||
| WASHER 4,3 DIN 125 FOR ORNAMENTAL BAR, BOTTOM AT REINFORCEMENT BRACKET |
004 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR ORNAMENTAL BAR, BOTTOM AT REINFORCEMENT BRACKET |
004 | - | - |
- To find out where to buy the item or equivalent, click on the part number.