Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 128.010 - TRANSMISSION Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
GEAR SHIFTING, TRANSMISSION |
- | XXX XXX XXX XXXX | - | - | |
| GEAR CASE COVER, TOP WITHOUT BACK-UP LIGHT SWITCH WITH SELECTOR LEVER WITHOUT SHIFTING LEVER Replaced by: A 111 260 06 14 |
- | A 18 626 013 14 | - | - | |
| 001 | GEAR CASE COVER, TOP WITHOUT BACK-UP LIGHT SWITCH WITH SELECTOR LEVER WITHOUT SHIFTING LEVER |
001 | A 11 126 006 14 | - | - |
| GEAR CASE COVER, TOP WITH SELECTOR LEVER WITHOUT SHIFTING LEVER Replaced by: A 111 260 07 14 |
- | A 18 626 014 14 | - | - | |
| GEAR CASE COVER, TOP WITH SELECTOR LEVER WITHOUT SHIFTING LEVER |
001 | A 11 126 007 14 | - | - | |
| GEAR CASE COVER WITH PRESSED-IN BUSHING FOR SHIFTING BAR, REVERSE GEAR Replaced by: A 111 260 04 14 |
- | A 18 626 012 14 | - | - | |
| 002 | GEAR CASE COVER WITH PRESSED-IN BUSHING FOR SHIFTING BAR, REVERSE GEAR |
001 | A 11 126 004 14 | - | - |
| 003 | BUSHING FOR SHIFTING BAR |
001 | A 15 399 200 05 | - | $7.89 |
| 004 | BAR FOR REVERSE GEAR STOP |
001 | A 13 626 500 48 | - | $3.40 |
| 006 | PRESSURE SPRING FOR BAR |
001 | A 18 099 326 01 | - | $2.14 |
| 008 | GUIDE PIN | 002 | A 13 626 502 47 | - | $18.45 |
| 009 | LOCKING PLATE | 001 | A 18 326 500 46 | - | $34.08 |
| HEX. -HD. SCREW M 6X18 DIN 933-8 G FOR LOCKING PLATE TO GEAR CASE COVER, TOP |
002 | - | - | ||
| SPRING WASHER B 6 DIN 137 FOR LOCKING PLATE TO GEAR CASE COVER, TOP |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR LOCKING PLATE TO GEAR CASE COVER, TOP |
002 | - | - | ||
| 013 | SHIFTING SHAFT FOR SHIFTING FINGER |
001 | A 18 626 800 07 | - | - |
| SHIFTING FINGER ON SHIFTING SHAFT Replaced by: A 186 268 00 33 |
- | A 18 326 801 33 | - | - | |
| 014 | SHIFTING FINGER ON SHIFTING SHAFT |
001 | A 18 626 800 33 | - | $10.11 |
| 015 | WASHER FOR SHIFTING SHAFT |
001 | A 18 326 800 52 | - | $0.85 |
| 016 | NEEDLE BEARING FOR SHIFTING SHAFT |
002 | A 00 098 101 10 | - | $16.78 |
| 017 | COVER FOR SHIFTING SHAFT |
001 | A 18 699 701 20 | - | - |
| SEAL RING A 12X22X7 DIN 6503 FOR SHIFTING SHAFT |
001 | - | - | ||
| LOCK RING 22X1 DIN 472 FOR SHIFTING SHAFT |
001 | - | - | ||
| 020 | SELECTOR FINGER AT GEAR CASE COVER |
001 | A 18 626 003 79 | - | - |
| 20a | SEALING RING FOR PIN, SELECTOR FINGER |
001 | A 18 699 711 40 | - | $2.57 |
| SELECTOR LEVER FOR SELECTOR FINGER TO GEAR CASE COVER, TOP Replaced by: A 120 260 23 37 |
- | A 18 626 000 37 | - | - | |
| 021 | SELECTOR LEVER FOR SELECTOR FINGER TO GEAR CASE COVER, TOP |
001 | A 12 026 023 37 | - | - |
| SELECTOR LEVER FOR SELECTOR FINGER TO GEAR CASE COVER, TOP Replaced by: A 120 260 25 37 |
- | A 12 026 010 37 | - | - | |
| SELECTOR LEVER FOR SELECTOR FINGER TO GEAR CASE COVER, TOP |
001 | A 12 026 025 37 | - | - | |
| BUSHING Replaced by: A 000 992 00 10 |
- | A 18 626 001 50 | - | - | |
| 022 | BUSHING | 001 | A 00 099 200 10 | - | - |
| HEX. -HD. SCREW M 6X25 DIN 931-8 G TO SECURE SELECTOR FINGER LEVER |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 TO SECURE SELECTOR FINGER LEVER |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S TO SECURE SELECTOR FINGER LEVER |
001 | - | - | ||
| 026 | GUIDE PLATE | 001 | A 18 626 001 28 | - | - |
| 027 | WASHER FOR GUIDE PIN FOR GUIDE PLATE TO GEAR CASE COVER, TOP |
002 | A 13 699 082 40 | - | $8.57 |
| 028 | NUT M 8 FOR GUIDE PIN FOR GUIDE PLATE TO GEAR CASE COVER, TOP |
002 | A 13 626 502 72 | - | $3.63 |
| SHIFT FORK FOR 1ST AND 2ND GEAR WAHLWEISE OPTIONAL |
001 | A 18 626 500 01 | - | - | |
| 029 | SHIFT FORK FOR 1ST AND 2ND GEAR WAHLWEISE OPTIONAL |
001 | A 18 626 507 01 | - | $331.59 |
| 030 | SHIFT FORK FOR 3RD GEAR AND 4TH GEAR |
001 | A 18 626 503 02 | - | - |
| PRESSURE SPRING IN SHIFTING FORK FOR 1ST, 2ND, 3RD AND 4TH GEAR Replaced by: A 186 993 13 01 |
- | A 19 899 307 01 | - | $55.73 | |
| 031 | PRESSURE SPRING IN SHIFTING FORK FOR 1ST, 2ND, 3RD AND 4TH GEAR |
002 | A 18 699 313 01 | - | $15.20 |
| STEEL BALL 8 MM III DIN 5401 IN SHIFTING FORK FOR 1ST, 2ND, 3RD AND 4TH GEAR |
002 | - | - | ||
| 033 | SPACER TUBE IN SHIFTING FORK FOR 1ST, 2ND, 3RD AND 4TH GEAR |
002 | A 13 626 500 53 | - | $0.30 |
| 034 | SHIM, 0.3 MM THICK OPTIONAL |
NB | A 13 626 500 51 | - | - |
| SHIM, 0.5 MM THICK OPTIONAL |
NB | A 13 626 501 51 | - | - | |
| SHIM, 1.0 MM THICK OPTIONAL |
NB | A 13 626 502 51 | - | - | |
| 035 | SHIFTING ROD FOR 1ST GEAR AND 2ND GEAR |
001 | A 13 626 504 04 | - | $6.29 |
| 036 | SHIFTING ROD FOR 3RD GEAR AND 4TH GEAR |
001 | A 13 626 505 04 | - | - |
| 037 | SPACER TUBE FOR SHIFTING RODS |
002 | A 18 426 500 53 | - | $16.46 |
| 038 | SHIFTING FORK FOR REVERSE GEAR |
001 | A 18 026 501 07 | - | $520.44 |
| 039 | PRESSURE SPRING FOR SHIFTING FORK FOR REVERSE GEAR |
001 | A 13 699 331 01 | - | $4.21 |
| STEEL BALL 8 MM III DIN 5401 FOR SHIFTING FORK FOR REVERSE GEAR |
001 | - | - | ||
| 041 | SPACER TUBE FOR SHIFTING FORK FOR REVERSE GEAR |
001 | A 13 626 501 53 | - | $1.01 |
| 042 | SHIM, 0.3 MM THICK OPTIONAL FOR SHIFTING FORK FOR REVERSE GEAR |
NB | A 13 626 500 51 | - | - |
| SHIM, 0.5 MM THICK OPTIONAL FOR SHIFTING FORK FOR REVERSE GEAR |
NB | A 13 626 501 51 | - | - | |
| SHIM, 1.0 MM THICK OPTIONAL FOR SHIFTING FORK FOR REVERSE GEAR |
NB | A 13 626 502 51 | - | - | |
| 043 | SHIFTING ROD FOR REVERSE GEAR |
001 | A 13 626 502 04 | - | $25.43 |
| 044 | KEY FOR SHIFTING ROD MOUNTING |
001 | A 13 626 500 81 | - | $30.07 |
| BREATHER AT GEAR CASE COVER, TOP Replaced by: A 111 260 00 58 |
- | A 13 635 001 90 | - | - | |
| 045 | BREATHER AT GEAR CASE COVER, TOP |
001 | A 11 126 000 58 | - | $44.70 |
| LEVER FOR SHIFTING SHAFT Replaced by: A 120 260 24 37 |
- | A 12 026 021 37 | - | - | |
| 046 | LEVER FOR SHIFTING SHAFT |
001 | A 12 026 024 37 | - | - |
| LEVER FOR SHIFTING SHAFT Replaced by: A 128 260 01 37 |
- | A 12 126 004 37 | - | - | |
| LEVER FOR SHIFTING SHAFT |
001 | A 12 826 001 37 | - | - | |
| BUSHING Replaced by: A 000 992 00 10 |
- | A 18 626 001 50 | - | - | |
| 047 | BUSHING | 001 | A 00 099 200 10 | - | - |
| HEX. -HD. SCREW M 6X25 DIN 931-8 G FOR LEVER TO SHIFTING SHAFT |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR LEVER TO SHIFTING SHAFT |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR LEVER TO SHIFTING SHAFT |
001 | - | - | ||
| 051 | GASKET FOR GEAR CASE COVER, TOP |
001 | A 18 626 101 79 | - | $5.31 |
| SPRING WASHER B 8 DIN 137 FOR GEAR CASE COVER TOP TO GEAR CASE |
004 | - | - | ||
| HEX. -HD. SCREW M 8X30 DIN 931-8 G FOR GEAR CASE COVER TOP TO GEAR CASE |
004 | - | - | ||
GEAR SHIFTING STEERING COLUMN |
- | XXX XXX XXX XXXX | - | - | |
| SHIFTING TUBE UP TO CHASSIS 002429 |
001 | A 18 026 001 82 | - | - | |
| 065 | SHIFTING TUBE FROM CHASSIS 002430 |
001 | A 18 026 025 82 | - | - |
| SHIFTING TUBE UP TO CHASSIS 002429 |
001 | A 18 026 013 82 | - | - | |
| SHIFTING TUBE FROM CHASSIS 002430 |
001 | A 18 026 026 82 | - | - | |
| 066 | GUIDE PIN IN SHIFTING TUBE, TOP |
001 | A 18 026 801 39 | - | - |
| GUIDE PIN IN SHIFTING TUBE, TOP |
001 | A 18 026 804 39 | - | - | |
| GUIDE RING FOR GUIDE PIN Replaced by: A 111 997 05 40 |
- | A 18 699 700 82 | - | - | |
| 067 | GUIDE RING FOR GUIDE PIN |
002 | A 11 199 705 40 | - | - |
| 67a | GUIDE SLEEVE FOR GUIDE PIN |
002 | A 18 026 800 38 | - | - |
| 068 | LOCK FOR GUIDE PIN |
001 | A 18 626 802 73 | - | $8.95 |
| 069 | SHIM FOR GUIDE PIN |
001 | A 18 399 035 40 | - | $3.63 |
| 070 | PIN, DISK-TYPE FOR PRESSURE SPRING |
001 | A 18 626 802 74 | - | $11.04 |
| 071 | PRESSURE SPRING IN SHIFTING TUBE |
001 | A 18 299 308 01 | - | $5.21 |
| 072 | BOOT FOR GEARSHIFT LEVER MOUNTING, TOP |
001 | A 18 026 803 97 | - | - |
| 073 | GEARSHIFT LEVER | 001 | A 18 026 805 24 | - | $148.00 |
| 73a | GEARSHIFT LEVER | 001 | A 18 026 002 39 | - | - |
| 73b | CABLE WITH END PIECE | 001 | A 18 054 007 38 | - | - |
| 73c | GEARSHIFT LEVER WITH CONTACT RING |
001 | A 18 026 003 39 | - | - |
| 73d | OCTAG. NUT | 001 | A 18 026 801 72 | - | - |
| 73e | LOCKING PLATE | 001 | A 18 099 403 10 | - | - |
| 73f | END CAP | 001 | A 18 026 802 57 | - | - |
| 73g | PRESSURE SPRING | 001 | A 18 099 330 01 | - | - |
| WASHER Replaced by: A 180 268 04 76 |
- | A 18 026 800 76 | - | - | |
| 73h | WASHER | 001 | A 18 026 804 76 | - | - |
| BALL CUP FOR GEARSHIFT LEVER Replaced by: A 111 268 00 92 |
- | A 18 326 800 92 | - | - | |
| 074 | BALL CUP FOR GEARSHIFT LEVER |
001 | A 11 126 800 92 | - | - |
| 075 | END CAP FOR GEARSHIFT LEVER |
001 | A 18 026 800 57 | - | $75.65 |
| 076 | GEARSHIFT LEVER KNOB OPTIONAL DARK GRAPHITE GREY |
001 | A 18 026 802 40 | - | - |
| GEARSHIFT LEVER KNOB OPTIONAL DARK GRAPHITE GREY |
001 | A 18 026 805 40 | - | - | |
| GEARSHIFT LEVER KNOB OPTIONAL IVORY COLOURED SPECIAL REQUEST |
001 | A 18 026 803 40 | - | - | |
| GEARSHIFT LEVER KNOB OPTIONAL IVORY COLOURED SPECIAL REQUEST |
001 | A 18 026 806 40 | - | - | |
| 077 | MOUNTING BODY WITH BOOT | 001 | A 12 026 021 94 | - | - |
| MOUNTING BODY WITH BOOT | 001 | A 12 026 022 94 | - | - | |
| 078 | BOOT FOR STEERING PASSAGE |
001 | A 18 046 208 96 | - | - |
| BUTTON-HD. RIVET 2,6X10 DIN 660 A1 |
003 | - | - | ||
| 079 | RUBBER MOUNTING, BOTTOM | 001 | A 12 026 001 95 | - | - |
| 080 | LOCK RING A 18X1,2 K N 55 B |
001 | - | - | |
| 082 | INTERMEDIATE SHAFT WITH BALL PIN |
001 | A 18 026 002 78 | - | - |
| INTERMEDIATE SHAFT WITH BALL PIN Replaced by: A 180 260 01 78 |
- | A 18 026 004 78 | - | - | |
| INTERMEDIATE SHAFT WITH BALL PIN |
001 | A 18 026 001 78 | - | - | |
| INTERMEDIATE SHAFT WITH BALL PIN |
001 | A 12 826 000 78 | - | - | |
| 083 | NEEDLE BEARING IN MOUNTING BODY FOR INTERMEDIATE SHAFT |
002 | A 00 098 122 10 | - | - |
| 085 | SEAL RING FOR NEEDLE BEARING |
002 | A 18 099 709 40 | - | $3.17 |
| 086 | WASHER AT MOUNTING BODY |
002 | A 18 099 023 40 | - | $0.23 |
| 86a | SPRING WASHER FOR INTERMEDIATE SHAFT |
001 | A 12 199 000 48 | - | - |
| 087 | INTERMEDIATE LEVER ON INTERMEDIATE SHAFT |
001 | A 18 026 002 81 | - | - |
| INTERMEDIATE LEVER ON INTERMEDIATE SHAFT |
001 | A 18 026 003 81 | - | - | |
| HEX. -HD. SCREW M 7X20 DIN 931-8 G FOR FIXING INTERMEDIATE LEVER TO INTERMEDIATE SHAFT |
001 | - | - | ||
| LOCK WASHER B 7 DIN 127 FOR FIXING INTERMEDIATE LEVER TO INTERMEDIATE SHAFT |
001 | - | - | ||
| 089 | CABLE CONNECTOR, DOUBLE-POLE FOR BACK-UP LIGHT |
001 | A 00 054 618 41 | - | $48.92 |
| 090 | CONTACT SWITCH WITH PLUG CONNECTION TO INCREASE ENGINE SPEED |
001 | A 00 154 504 24 | - | - |
| CONTROL SWITCH TO INCREASE ENGINE SPEED |
001 | A 00 154 506 24 | - | - | |
| 091 | INTERMEDIATE PIECE | 001 | A 12 826 800 28 | - | - |
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S FOR CABLE CONNECTOR TO MOUNTING BODY, STEERING |
002 | - | - | ||
| CYLINDR. SCREW AM 4X15 DIN 84-4 S FOR CONTROL SWITCH AND CABLE CONNECTOR TO MOUNTING BODY |
002 | - | - | ||
| CYLINDR. SCREW AM 4X18 DIN 84-4 S FOR INTERMEDIATE PIECE AND CABLE CONNECTOR TO MOUNTING BODY |
002 | - | - | ||
| HEX. -HD. SCREW M 5X10 DIN 933-8 G FOR CONTROL SWITCH TO INTERMEDIATE PIECE |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR CONTROL SWITCH TO INTERMEDIATE PIECE |
001 | - | - | ||
| 092 | SELECTOR LEVER | 001 | A 18 026 002 37 | - | $90.09 |
| SLECTOR LEVER | 001 | A 12 826 000 37 | - | - | |
| 093 | SÈLECTOR LEVER SHAFT | 001 | A 18 026 800 32 | - | - |
| SELECTOR LEVER SHAFT | 001 | A 18 026 802 32 | - | - | |
| 094 | WASHER 12 N 55 A FOR SELECTOR LEVER TO SELECTOR LEVER SHAFT |
001 | - | - | |
| HEX. -HD. SCREW M 8X30 DIN 931-8 G FOR SELECTOR LEVER TO SELECTOR LEVER SHAFT |
001 | - | - | ||
| LOCK WASHER B 8 DIN 127 FOR SELECTOR LEVER TO SELECTOR LEVER SHAFT |
001 | - | - | ||
| HEX. NUT M 8 DIN 934-5 S FOR SELECTOR LEVER TO SELECTOR LEVER SHAFT |
001 | - | - | ||
| 095 | NEEDLE BEARING FOR SELECTOR LEVER SHAFT |
002 | A 00 098 121 10 | - | $6.67 |
| 095 | NEEDLE BEARING FOR SELECTOR LEVER SHAFT |
001 | A 00 098 121 10 | - | $6.67 |
| NEEDLE BEARING FOR SELECTOR LEVER SHAFT |
001 | A 00 098 123 10 | - | - | |
| LOCK RING 14 X 1 DIN 472 FOR SELECTOR LEVER SHAFT |
001 | - | - | ||
| 096 | SEAL RING FOR SELECTOR LEVER SHAFT |
001 | A 18 099 708 40 | - | $0.08 |
| 097 | SPACER SLEEVE FOR NEEDLE BEARING, SELECTOR LEVER SHAFT |
001 | A 18 099 110 40 | - | - |
| 099 | SELECTOR LEVER OPTIONAL AT SHIFTING TUBE |
001 | A 18 626 802 15 | - | - |
| SELECTOR LEVER OPTIONAL AT SHIFTING TUBE |
001 | A 18 026 802 15 | - | $21.19 | |
| LOCK WASHER B 6 DIN 127 FOR SELECTOR LEVER TO SELECTOR LEVER SHAFT |
001 | - | - | ||
| HEX. -HD. SCREW M 6X18 DIN 933-8 G FOR SELECTOR LEVER TO SELECTOR LEVER SHAFT |
001 | - | - | ||
| COVER OPTIONAL WITH 180 268 03 05 |
001 | A 18 026 000 65 | - | - | |
| DOWEL PIN 8 H8 X 8 DIN 7 |
001 | - | - | ||
| 102 | COVER FOR MOUNTING BODY OPTIONAL WITH 180 260 00 65 |
001 | A 18 026 803 05 | - | $8.68 |
| HEX. -HD. SCREW M 8X45 DIN 931-8 G FOR COVER TO MOUNTING BODY |
002 | - | - | ||
| LOCKING PLATE 8,4 DIN 463 FOR COVER TO MOUNTING BODY |
002 | - | - | ||
| 103 | THRUST PIN 41 MM LONG FOR BACK-UP LIGHT SWITCH IF REQUIRED SHORTEN PIN TO 40.5-40.0 MM |
001 | A 18 326 106 74 | - | $6.32 |
| BACK-UP LIGHT SWITCH Replaced by: A 000 545 06 06 |
- | A 00 054 502 06 | - | - | |
| 104 | BACK-UP LIGHT SWITCH | 001 | A 00 054 506 06 | - | $219.56 |
| 105 | RUBBER BOOT FOR BACK-UP LIGHT SWITCH |
001 | A 00 054 600 35 | - | $6.80 |
| HEX. NUT M 8 DIN 934-5 S FOR COVER TO MOUNTING BODY |
002 | - | - | ||
| 106 | BOOT FOR SHIFTING TUBE |
001 | A 18 026 801 97 | - | $66.61 |
| 107 | LEVER AT SHIFTING TUBE, BOTTOM |
001 | A 18 026 007 15 | - | - |
| LOCK WASHER B 7 DIN 127 FOR LEVER AT SHIFTING TUBE |
001 | - | - | ||
| HEX. -HD. SCREW M 7 X 20 DIN 931-8 G FOR LEVER AT SHIFTING TUBE |
001 | - | - | ||
| 110 | SPRINGY BALL SOCKET FOR CONNECTION OF LEVER TO SHIFTING TUBE AND LEVER, INTERMEDIATE SHAFT |
001 | A 00 026 800 66 | - | - |
| SPRINGY BALL SOCKET FOR CONNECTION OF LEVER TO SHIFTING TUBE AND LEVER, INTERMEDIATE SHAFT |
001 | A 00 026 802 66 | - | - | |
| WIRE CLAMP S 10 DIN 71805 FOR BALL SOCKET TO BALL PIN |
002 | - | - | ||
| 113 | SEAL BOOT | 001 | A 18 046 203 96 | - | - |
| SEAL BOOT | 001 | A 18 046 206 96 | - | - | |
| 114 | DUST SHIELD FOR MOUNTING BODY |
001 | A 18 026 802 05 | - | - |
| 115 | GASKET FOR DUST SHIELD |
001 | A 18 026 800 80 | - | - |
| FILLISTER-HD. SCREW AM 4X8 DIN 84-4 S FOR DUST SHIELD TO MOUNTING BODY |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR DUST SHIELD TO MOUNTING BODY |
002 | - | - | ||
| 117 | RUBBER BOOT | 001 | A 18 026 802 97 | - | - |
| 118 | SHIFTING ROD | 001 | A 18 026 011 33 | - | - |
| SHIFTING ROD | 001 | A 18 026 021 33 | - | - | |
| SHIFTING ROD | 001 | A 18 026 016 33 | - | - | |
| SHIFTING ROD WAS NOT INSTALLED |
- | A 18 026 022 33 | - | - | |
| SHIFTING ROD | 001 | A 12 826 000 33 | - | - | |
| HEX. NUT M 10 DIN 70616-5 S |
001 | - | - | ||
| BALL SOCKET Replaced by: A 000 991 04 22 |
- | A 18 099 100 22 | - | - | |
| 120 | BALL SOCKET | 001 | A 00 099 104 22 | - | - |
| WIRE CLAMP S 13 DIN 71805 FOR SHIFTING ROD TO LEVER, MOUNTING BODY UP TO CHASSIS 002454 |
001 | - | - | ||
| 122 | SELECTOR ROD | 001 | A 18 026 012 33 | - | - |
| SELECTOR ROD | 001 | A 18 026 025 33 | - | - | |
| SELECTOR ROD | 001 | A 12 126 018 33 | - | - | |
| SELECTOR ROD WAS NOT INSTALLED |
- | A 18 026 026 33 | - | - | |
| SELECTOR ROD | 001 | A 12 826 001 33 | - | - | |
| HEX. NUT M 10 DIN 70616-5 S |
001 | - | - | ||
| BALL SOCKET Replaced by: A 000 991 04 22 |
- | A 18 099 100 22 | - | - | |
| 124 | BALL SOCKET | 001 | A 00 099 104 22 | - | - |
| WIRE CLAMP S 13 DIN 71805 FOR SELECTOR ROD TO LEVER, MOUNTING BODY UP TO CHASSIS 002454 |
001 | - | - | ||
| SPRING 8 N 55 A FOR SHIFTING ROD AND SELECTOR ROD |
002 | - | - | ||
| 127 | WASHER FOR SHIFTING ROD AND SELECTOR ROD |
002 | A 18 399 042 40 | - | $3.63 |
| COTTER PIN 2X15 DIN 94 FOR SHIFTING ROD AND SELECTOR ROD |
002 | - | - |
- To find out where to buy the item or equivalent, click on the part number.