Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 128.011 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
BATTERY AND STARTER CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 001 | BATTERY 12 V 60 AH | 001 | A 00 054 158 01 | - | - |
| BATTERY 12 V 56 AH WITH MIPOR SEPARATOR EXPORT, SPECIAL REQUEST TROPICAL DESIGN |
001 | A 00 054 172 01 | - | - | |
| FIXING FRAME Replaced by: A 111 540 00 23 |
- | A 12 154 001 23 | - | - | |
| 002 | FIXING FRAME | 001 | A 11 154 000 23 | - | $267.42 |
| 003 | TIGHTENING SCREW FOR BATTERY FIXING |
002 | A 12 054 101 24 | - | - |
| LOCK WASHER B 6 DIN 127 FOR BATTERY FIXING |
002 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR BATTERY FIXING |
002 | - | - | ||
| RUBBER HOSE, 20 MM LONG OVER ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER |
002 | A 00 098 705 32 | - | - | |
| 006 | STARTER CABLE, 660-MM LONG FROM POS. POLE TO STARTER MOTOR |
001 | A 12 854 000 30 | - | - |
| STARTER CABLE, 1,280-MM LONG FROM POS. POLE TO STARTER MOTOR |
001 | A 18 054 001 30 | - | - | |
| RUBBER PROTECTIVE CAP FOR STARTER CABLE Replaced by: A 111 546 00 35 |
- | A 13 654 600 35 | - | - | |
| 007 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 11 154 600 35 | - | - |
| 008 | GROUND CABLE FROM NEG. POLE OF BATTERY TO ENGINE |
001 | A 18 054 000 31 | - | - |
| GROUND CABLE FROM NEG. POLE OF BATTERY TO ENGINE |
001 | A 18 054 004 31 | - | - | |
| 009 | GROMMET FOR STARTER CABLE THROUGH BRACKET TO FRONT WALL |
001 | A 00 099 734 81 | - | $1.11 |
| 010 | GROMMET FOR STARTER CABLE THROUGH PARTITION WALL |
001 | A 18 699 707 81 | - | $2.61 |
| 011 | FIXING CLAMP FOR STARTER CABLE TO BODY FRONT END |
001 | A 18 799 500 37 | - | - |
| LENS-HD. SHEET METAL SCREW BZ 4,8X9,5 DIN 7981 FOR STARTER CABLE TO BODY FRONT END |
001 | - | - | ||
CABLES |
- | XXX XXX XXX XXXX | - | - | |
| MAIN CABLE HARNESS | 001 | A 12 854 000 05 | - | - | |
| MAIN CABLE HARNESS | 001 | A 12 854 001 05 | - | - | |
| 016 | HOUSING, LOWER PART, WITH SOCKET |
001 | A 00 054 506 28 | - | - |
| 017 | GASKET | 001 | A 00 054 500 80 | - | - |
| FIXING CLIP FOR HOUSING, UPPER PART WITH LOWER PART, TO GLOVE COMPARTMENT |
002 | A 00 098 834 78 | - | $0.36 | |
| 018 | CABLE HARNESS IN JACKET TUBE FROM CHASSIS 002430 |
001 | A 12 154 019 09 | - | - |
| CABLE HARNESS IN JACKET TUBE FROM CHASSIS 002430 |
001 | A 12 154 021 09 | - | - | |
| CABLE HARNESS IN JACKET TUBE FROM CHASSIS 002430 |
001 | A 12 154 020 09 | - | - | |
| ADDITIONAL CABLE HARNESS UP TO CHASSIS 9501239 |
001 | A 18 054 007 09 | - | - | |
| ADDITIONAL CABLE HARNESS UP TO CHASSIS 9501239 |
001 | A 18 054 009 09 | - | - | |
| ADDITIONAL CABLE HARNESS FOR HIGHER NUMBER OF REVOLUTIONS AND SECONDARY BRAKE FROM CHASSIS 9501240 |
001 | A 12 854 000 09 | - | - | |
| ADDITIONAL CABLE HARNESS FOR HIGHER NUMBER OF REVOLUTIONS AND SECONDARY BRAKE FROM CHASSIS 9501240 |
001 | A 12 854 001 09 | - | - | |
| ADDITIONAL CABLE HARNESS FROM SWITCH, REAR AXLE TO GROUND AND SWITCH, SERVO AGGREGATE |
001 | A 18 054 008 09 | - | - | |
Replaced by: A 128 540 01 07 |
- | A 12 854 000 07 | - | - | |
Replaced by: A 128 540 01 07 |
- | A 12 854 002 07 | - | - | |
| 019 | 001 | A 12 854 001 07 | - | - | |
Replaced by: A 128 540 04 07 |
- | A 12 854 003 07 | - | - | |
Replaced by: A 128 540 04 07 |
- | A 12 854 005 07 | - | - | |
| GROUND CABLE FROM CONTACTOR TERMINAL 30/51 TO GROUND UP TO CHASSIS 9501239 |
001 | A 18 054 029 38 | - | - | |
Replaced by: A 000 997 47 82 |
- | A 18 099 715 82 | - | $3.50 | |
| RUBBER HOSE, 20 MM LONG FOR CABLE FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH OR STARTER SIDE TO MAIN CABLE HARNESS RESP. Replaced by: A 000 997 47 82 |
- | A 12 099 708 82 | - | - | |
| RUBBER HOSE, 20 MM LONG FOR CABLE FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH OR STARTER SIDE TO MAIN CABLE HARNESS RESP. ORDER BY THE METER |
003 | A 00 099 747 82 | - | - | |
| 020 | CABLE HARNESS FROM GENERATOR TO GOVERNOR |
001 | A 18 054 000 08 | - | $41.76 |
| 021 | RUBBER PROTECTIVE CAP FOR TERMINAL TO GENERATOR D POS. AND DF |
002 | A 00 054 602 35 | - | - |
| INSULATING HOSE, 220-MM LONG B 10X11,4 SW DIN 40621 FOR CABLE TO BLINKER LIGHT ORDER BY THE METER |
001 | - | - | ||
| INSULATING HOSE 40-MM LONG B 12X13,6 DIN 40621 FOR MAIN CABLE HARNESS THROUGH WHEEL ARCH PAN, LEFT AND RIGHT ORDER BY THE METER |
004 | - | - | ||
| INSULATING HOSE, 100-MM LONG B 16X18 SW DIN 40621 FOR MAIN CABLE HARNESS, ROTARY SWITCH ORDER BY THE METER |
001 | - | - | ||
| REPLACED BY 186 997 06 81 TOGETHER WITH 2 GROMMET 186 997 07 81 |
- | A 18 699 704 81 | - | $2.33 | |
| 023 | CABLE HARNESS FROM CABLE CONNECTOR, 2 POLES, TO BACK-UP LIGHT |
001 | A 12 054 017 38 | - | - |
| CABLE HARNESS FROM CABLE CONNECTOR, 2 POLES, TO BACK-UP LIGHT |
001 | A 18 054 031 38 | - | - | |
| 024 | BRACKET FOR CABLE HARNESS, BACK-UP LIGHT |
001 | A 18 054 600 43 | - | - |
| 025 | GROMMET FOR CABLE HARNESS TO BRACKET |
001 | A 00 099 731 81 | - | $0.98 |
| FIXING CLAMP FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH |
001 | A 00 098 828 78 | - | $0.41 | |
| RUBBER HOSE, 20 MM LONG FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH TO MAIN CABLE HARNESS Replaced by: A 000 997 47 82 |
- | A 18 099 715 82 | - | $3.50 | |
| RUBBER HOSE, 20 MM LONG FROM CABLE CONNECTOR TO BACK-UP LIGHT SWITCH TO MAIN CABLE HARNESS ORDER BY THE METER |
001 | A 00 099 747 82 | - | - | |
| FIXING CLAMP 1X8 DIN 72571 FOR CABLE, INCREASE OF REVOLUTION TO BRACKET |
001 | - | - | ||
| CYLINDRICAL SCREW AM 4X10 DIN 84-4 S FOR CABLE, INCREASE OF REVOLUTION TO BRACKET |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE, INCREASE OF REVOLUTION TO BRACKET |
001 | - | - | ||
| FIXING CLAMP FOR CAPILLARY TUBE AND CABLE HARNESS TO BRACKET FOR INJECTION PIPES |
002 | A 18 699 502 20 | - | $11.11 | |
| 026 | GROUND CABLE FROM STARTER FLANGE TO FRONT WALL |
001 | A 18 654 003 41 | - | $97.85 |
| 027 | SCREW WITH LOCKING PLATE FOR GROUND CABLE TO FRONT WALL |
001 | A 12 042 002 27 | - | $7.40 |
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE TO FRONT WALL |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE TO FRONT WALL |
001 | - | - | ||
| SCREW WITH LOCKING PLATE FOR GROUND CABLE, HEADLIGHT AND FOGLIGHT TO WHEEL ARCH PAN |
001 | A 12 042 002 27 | - | $7.40 | |
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE, HEADLIGHT AND FOGLIGHT TO WHEEL ARCH PAN |
001 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR GROUND CABLE, HEADLIGHT AND FOGLIGHT TO WHEEL ARCH PAN |
001 | - | - | ||
| 028 | GROUND CABLE FOR FUEL PUMP |
001 | A 12 854 000 38 | - | - |
| LENS-HD. SCREW AM 6X10 DIN 7985-4 S FOR GROUND CABLE, FUEL PUMP |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE, FUEL PUMP |
001 | - | - | ||
| HOSE PIECE, 20 MM LONG FOR GROUND CABLE, FUEL PUMP ORDER BY THE METER |
001 | A 00 098 702 32 | - | $5.24 | |
| GROMMET FOR GROUND CABLE, FUEL PUMP THROUGH SPARE WHEEL RECESS |
001 | A 00 099 731 81 | - | $0.98 | |
| 029 | SPRING CLIP FOR CAPILLARY TUBE AND CABLE TO "THERMO" SWITCH |
009 | A 12 099 302 25 | - | $14.98 |
| 030 | CABLE SLEEVE ABOVE CABLE TO "THERMO" SWITCH |
001 | A 00 054 507 45 | - | $15.51 |
| RUBBER PROTECTIVE CAP ABOVE CABLE TO "THERMO" SWITCH |
002 | A 00 054 602 35 | - | - | |
| 031 | CABLE CONNECTOR, 5 POLES FOR TAILLIGHT CABLE HARNESS |
001 | A 00 054 619 41 | - | - |
| 032 | CABLE CONNECTOR, 8-POLES FOR TAILLIGHT CABLE HARNESS |
001 | A 00 054 632 41 | - | $11.05 |
| CABLE CONNECTOR, 5 POLES FOR STEERING SPINDLE HARNESS UP TO CHASSIS 002429 |
001 | A 00 054 606 41 | - | - | |
| 034 | CABLE CONNECTOR, 3 POLES FOR HEATING BLOWER CONNECTION |
002 | A 00 054 635 41 | - | - |
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR TO FRONT WALL OR STRUT, RESP. |
004 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5 POLES TO WHEEL ARCH PAN |
002 | - | - | ||
| 037 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 18 199 700 81 | - | - |
| 038 | GROMMET FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 00 099 727 81 | - | $1.49 |
| 039 | FIXING CLAMP WITH LUG FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
003 | A 00 098 853 78 | - | - |
| 040 | FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
003 | A 00 098 834 78 | - | $0.36 |
| GROMMET FOR FUEL TRANSMITTER CABLE Replaced by: A 000 997 18 81 |
- | A 00 099 717 81 | - | - | |
| 042 | GROMMET FOR FUEL TRANSMITTER CABLE |
001 | A 00 099 718 81 | - | - |
| LENS-HD. SHEET METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE, TRANSMITTER TO REAR CROSS MEMBER |
001 | - | - | ||
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR 3-POLES TO WHEEL ARCH PAN |
004 | - | - | ||
| 046 | FIXING CLAMP FOR TAILLIGHT CABLE HARNESS TO LUGGAGE COMPARTMENT COVER PLATE AND CABLE TO HORN |
008 | A 00 098 833 78 | - | $0.67 |
| 047 | FIXING CLAMP FOR TAILLIGHT CABLE HARNESS TO LUGGAGE COMPARTMENT COVER PLATE AND CABLE TO HORN |
005 | A 00 098 834 78 | - | $0.36 |
| 056 | BRACKET FOR TAILLIGHT CABLE HARNESS, LEFT AND RIGHT |
008 | A 12 054 601 82 | - | - |
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION TO LUGGAGE COMPARTMENT, TAILLIGHT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR GROUND CONNECTION TO LUGGAGE COMPARTMENT, TAILLIGHT |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR GROUND CONNECTION TO LUGGAGE COMPARTMENT, TAILLIGHT |
002 | - | - | ||
| GROMMET FOR TAILLIGHT CABLE HARNESS IN COVER BOX FOR BOW LIGHT |
001 | A 00 099 717 81 | - | - | |
| GROMMET FOR TAILLIGHT CABLE HARNESS THROUGH WHEEL ARCH PAN, LEFT AND RIGHT |
002 | A 00 099 722 81 | - | $0.98 | |
| TEROSTAT LACE, DIA. 6-MM, 50-MM LONG FOR TAILLIGHT CABLE HARNESS THROUGH WHEEL ARCH PAN, REAR ORDER BY THE METER |
002 | A 00 098 946 85 | - | - | |
| 061 | COVER PLATE FOR PROTECTIVE PLATE TO REAR CROSS MEMBER |
001 | A 12 054 600 81 | - | - |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR PROTECTIVE PLATE TO REAR CROSS MEMBER |
002 | - | - | ||
| 062 | FIXING CLAMP FOR CABLE TO CONTROL SWITCH TO REAR CROSS MEMBER |
003 | A 18 699 502 20 | - | $11.11 |
| LENS-HD. SHEET METAL SCREW B 3,9X13 DIN 7981 FOR CABLE TO CONTROL SWITCH TO REAR CROSS MEMBER |
003 | - | - | ||
| 063 | FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 13 699 500 37 | - | $27.83 |
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | - | - | ||
| 066 | FIXING CLAMP FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 13 699 501 35 | - | - |
| LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | - | - | ||
| 067 | CAGE CLIP WITH NUT FOR MAIN CABLE HARNESS THROUGH FRONT WALL |
001 | A 00 099 022 91 | - | - |
| 068 | FIXING CLAMP FOR MAIN CABLE HARNESS TO GLOVE COMPARTMENT |
001 | A 13 699 501 35 | - | - |
| LENS-HD. SCREW AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS TO GLOVE COMPARTMENT |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE HARNESS TO GLOVE COMPARTMENT |
001 | - | - | ||
| FIXING CLAMP FOR CABLE, STOP SWITCH TO BRAKE PIPE |
002 | A 00 198 809 78 | - | - | |
Replaced by: A 128 540 00 50 |
- | A 12 854 003 50 | - | - | |
| FUSE BOX Replaced by: A 128 540 00 50 |
- | A 12 854 001 50 | - | - | |
| 071 | FUSE BOX | 001 | A 12 854 000 50 | - | - |
| 072 | COVER FOR FUSE BOX |
001 | A 00 054 502 03 | - | $73.37 |
| FUSE, 12 AMP. 8 DIN 72581 |
010 | - | - | ||
| FUSE, 12 AMP. 25 DIN 72581 |
002 | - | - | ||
| LENS-HD. SCREW AM 4X12 DIN 85-4 S FOR CABLES TO FUSE BOX |
017 | - | - | ||
| TOOTHED WASHER J 4,3 DIN 6797 FOR CABLES TO FUSE BOX |
017 | - | - | ||
INSTRUMENTS AND SWITCHES |
- | XXX XXX XXX XXXX | - | - | |
Replaced by: A 000 545 06 11 |
- | A 12 054 000 44 | - | - | |
Replaced by: A 000 545 06 11 |
- | A 18 054 001 44 | - | - | |
| PUSH SWITCH FOR INSTRUMENT LIGHTING Replaced by: A 000 545 06 11 |
- | A 12 854 000 44 | - | - | |
| 080 | PUSH SWITCH FOR INSTRUMENT LIGHTING |
001 | A 00 054 506 11 | - | $29.83 |
| 081 | ESCUTCHEON | 001 | A 12 054 500 72 | - | - |
| 082 | FELT RING | 001 | A 00 099 720 40 | - | $0.50 |
| BUTTON UP TO CHASSIS 002429 |
001 | A 12 054 502 37 | - | - | |
| LENS-HD. SCREW AM 4X6 DIN 85-4 S |
010 | - | - | ||
| TOOTHED WASHER 4,3 DIN 6797 |
010 | - | - | ||
| 084 | COMBI INSTRUMENT WITH READING IN KILOMETERS MEASURING RANGE 180 KM RATIO 0.935 |
001 | A 12 854 200 01 | - | - |
| COMBI INSTRUMENT WITH READING IN KILOMETERS MEASURING RANGE 180 KM RATIO 0.935 |
001 | A 12 854 206 01 | - | - | |
| COMBI INSTRUMENT WITH READING IN MILES RATIO 1.50 |
001 | A 12 854 201 01 | - | - | |
| COMBI INSTRUMENT WITH READING IN MILES RATIO 1.50 |
001 | A 12 854 207 01 | - | - | |
| COMBI INSTRUMENT WITH READING IN KILOMETERS RATIO 0.88 FOR TIRES 6.40-15 EXPORT, SPECIAL REQUEST |
001 | A 12 854 202 01 | - | - | |
| COMBI INSTRUMENT WITH READING IN MILES RATIO 1.425 FOR TIRES 6.40-15 EXPORT, SPECIAL REQUEST |
001 | A 12 854 203 01 | - | - | |
| KILOMETER COUNTER WITH COMBI INSTRUMENT HOUSING |
001 | A 00 254 229 06 | - | - | |
| MILEAGE COUNTER WITH COMBI INSTRUMENT HOUSING |
001 | A 00 254 230 06 | - | - | |
| KILOMETER COUNTER WITH COMBI INSTRUMENT HOUSING EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 00 254 231 06 | - | - | |
| MILEAGE COUNTER WITH COMBI INSTRUMENT HOUSING EXPORT, SPECIAL REQUEST FOR TIRES 6.40-15 |
001 | A 00 254 232 06 | - | - | |
| KILOMETER COUNTER WITH CONTACT WARNING LIGHT WITH COMBI INSTRUMENT HOUSING |
001 | A 00 254 281 06 | - | - | |
| MILEAGE COUNTER WITH CONTACT WARNING LIGHT WITH COMBI INSTRUMENT HOUSING |
001 | A 00 254 282 06 | - | - | |
| 085 | OIL PRESSURE GAUGE | 001 | A 00 054 291 02 | - | - |
| OIL PRESSURE GAUGE WITH READING IN ENGLISH |
001 | A 00 054 292 02 | - | - | |
| 086 | TELE-THERMOMETER, DEG. C |
001 | A 00 154 293 05 | - | - |
TELE-THERMOMETER, DEG. F |
001 | A 00 154 294 05 | - | - | |
| 087 | FUEL GAUGE | 001 | A 00 054 262 03 | - | - |
| 088 | FRAME FOR COMBI INSTRUMENT |
001 | A 18 054 200 39 | - | - |
| 089 | TENSION SPRING FOR COMBI INSTRUMENT |
002 | A 12 099 317 10 | - | - |
| 090 | RUBBER FRAME FOR COMBI INSTRUMENT |
001 | A 18 054 201 80 | - | - |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 00 054 508 19 | - | - | |
| 091 | LAMP SOCKET | 008 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
007 | - | - | ||
| CLOCK, ELECTRIC UP TO CHASSIS 002429 |
001 | A 18 054 202 11 | - | - | |
| LAMP SOCKET Replaced by: A 000 545 07 19 |
- | A 18 354 500 19 | - | - | |
| 101 | LAMP SOCKET | 001 | A 00 054 507 19 | - | - |
| BULB H 12 V 2 W DIN 72601 |
001 | - | - | ||
| 102 | GROMMET FOR CLOCK CABLE THROUGH FRONT WALL |
001 | A 00 099 731 81 | - | $0.98 |
| 103 | GROMMET FOR KILOMETER COUNTER TRIP RESET, THROUGH COVER PLATE |
001 | A 00 099 718 81 | - | - |
| 104 | BUTTON FOR KILOMETER COUNTER TRIP RESET UP TO CHASSIS 002429 |
001 | A 12 054 502 37 | - | - |
| 105 | ESCUTCHEON FOR KILOMETER COUNTER TRIP RESET |
001 | A 12 054 500 72 | - | - |
| 106 | FELT RING FOR KILOMETER COUNTER TRIP RESET |
001 | A 00 099 720 40 | - | $0.50 |
| WASHER 8,4 DIN 433 FOR KILOMETER COUNTER TRIP RESET |
001 | - | - | ||
| HEX. NUT M 8X1 DIN 936-5 S FOR KILOMETER COUNTER TRIP RESET |
001 | - | - | ||
| 109 | DIMMING RESISTOR FOR INSTRUMENT LIGHTING |
001 | A 00 054 509 31 | - | - |
PUSH-BUTTON SWITCH |
001 | A 00 054 517 14 | - | - | |
| ESCUTCHEON FOR PUSH-BUTTON SWITCH |
001 | A 12 054 503 72 | - | - | |
| WASHER FOR PUSH-BUTTON SWITCH |
001 | A 18 099 015 40 | - | - | |
| DISTANCE LIGHT BLINKER SWITCH UP TO CHASSIS 002429 |
001 | A 00 054 576 24 | - | - | |
| COVER PLATE FOR DISTANCE LIGHT BLINKER SWITCH UP TO CHASSIS 002429 |
001 | A 18 046 200 23 | - | - | |
| LENS-HD. COUNTERSUNK SCREW AM 4X10 DIN 7988-4 S VERCHROMT FOR COVER PLATE TO JACKET TUBE UP TO CHASSIS 002429 |
002 | - | - | ||
| BLINKER LEVER KNOB, DARK GRAPHITE GREY Replaced by: A 180 545 04 37 |
- | A 18 054 502 37 | - | - | |
| 114 | BLINKER LEVER KNOB, DARK GRAPHITE GREY |
001 | A 18 054 504 37 | - | $30.25 |
| BLINKER LEVER KNOB, IVORY COLOURED SPECIAL REQUEST |
001 | A 18 054 505 37 | - | - | |
| 116 | BLINKER TRANSMITTER, | 001 | A 00 054 423 32 | - | - |
| RESET SWITCH UP TO CHASSIS 002429 |
001 | A 00 054 591 24 | - | - | |
| ADDITIONAL CABLE HARNESS UP TO CHASSIS 002429 |
001 | A 18 054 016 09 | - | - | |
| HEX. -HD. SCREW M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER TO BRACKET, PARTITION WALL |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BLINKER TRANSMITTER TO BRACKET, PARTITION WALL |
002 | - | - | ||
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO HOSE |
001 | A 12 854 002 60 | - | - | |
| OIL PRESSURE GAUGE PIPE FROM INSTRUMENT TO CONNECTION PIECE |
001 | A 12 854 003 60 | - | - | |
| 123 | CONNECTION PIECE FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9500853 |
001 | A 12 854 200 47 | - | - |
| OIL PRESSURE GAUGE PIPE FROM CONNECTION PIECE TO HOSE |
001 | A 12 054 006 60 | - | - | |
| SPRING WASHER A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET |
002 | - | - | ||
| HEX. NUT BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET |
001 | - | - | ||
| RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL Replaced by: A 000 987 00 32 |
- | A 00 098 709 32 | - | $6.65 | |
| 127 | RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL ORDER BY THE METER |
001 | A 00 098 700 32 | - | - |
| 127 | RUBBER HOSE, 25 MM LONG FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL ORDER BY THE METER |
002 | A 00 098 700 32 | - | - |
| FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL Replaced by: A 136 995 05 01 |
- | A 13 699 502 20 | - | $7.91 | |
| 128 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL |
001 | A 13 699 505 01 | - | - |
| 128 | FIXING CLAMP FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL |
002 | A 13 699 505 01 | - | - |
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL |
001 | - | - | ||
| LENS-HD. SHEET METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL |
002 | - | - | ||
| GROMMET FOR CAPILLARY TUBE THROUGH BRACKET Replaced by: A 186 997 06 81 |
- | A 18 699 705 81 | - | - | |
| GROMMET FOR CAPILLARY TUBE THROUGH BRACKET CUT OPEN IF NECESSARY |
001 | A 18 699 706 81 | - | $1.79 | |
| 130 | HOSE FOR OIL PRESSURE GAUGE PIPE |
001 | A 12 854 000 59 | - | $43.69 |
| HOSE FOR OIL PRESSURE GAUGE PIPE |
001 | A 12 154 002 59 | - | $84.01 | |
| 131 | STOP LIGHT SWITCH SEE ALSO GROUP 42 |
001 | A 00 054 522 09 | - | - |
| 132 | FOOT DIMMER SWITCH OPTIONAL |
001 | A 00 054 504 12 | - | - |
| FOOT DIMMER SWITCH OPTIONAL |
001 | A 00 054 508 12 | - | - | |
| 133 | INSULATING PLATE FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
001 | A 13 654 501 58 | - | - |
| LENS-HD.COUNTERSUNK SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR |
002 | - | - | ||
| GROMMET FOR CABLE TO FOOR DIMMER SWITCH |
001 | A 00 099 727 81 | - | $1.49 | |
| FLEXIBLE DRIVE SHAFT FOR SPEEDOMETER Replaced by: A 180 542 07 07 |
- | A 18 054 203 07 | - | - | |
| 137 | FLEXIBLE DRIVE SHAFT FOR SPEEDOMETER |
001 | A 18 054 207 07 | - | $125.29 |
| 138 | GROMMET FOR TACHOMETER SHAFT THROUGH FORK SUPPORT |
002 | A 18 099 712 81 | - | - |
| 139 | GROMMET FOR LOCKING PASSAGE OF 3RD FORK SUPPORT |
001 | A 18 098 700 44 | - | - |
| 140 | FIXING CLAMP FOR FLEXIBLE DRIVE SHAFT TO BODY FRONT END |
001 | A 12 099 500 05 | - | - |
| LENS-HD. SCREW AM 6X12 DIN 7985-4 S FOR FLEXIBLE DRIVE SHAFT TO BODY FRONT END |
001 | - | - | ||
| 141 | FIXING CLAMP FOR FLEXIBLE DRIVE SHAFT AT PEDAL FLOOR BOTTOM, RIGHT |
001 | A 00 098 834 78 | - | $0.36 |
| 142 | CAGE CLIP WITH NUT FOR FLEXIBLE DRIVE SHAFT AT PEDAL FLOOR BOTTOM, RIGHT |
002 | A 00 099 025 91 | - | - |
| GROMMET FOR FLEXIBLE DRIVE SHAFT AT PEDAL FLOOR |
001 | A 00 099 731 81 | - | $0.98 | |
| GROMMET FOR FLEXIBLE DRIVE SHAFT THROUGH CROSS MEMBER |
001 | A 18 699 704 81 | - | $2.33 | |
| 143 | 3-ELEMENT VOLTAGE | 001 | A 00 015 494 06 | - | - |
| 145 | GROMMET WITH | 003 | A 00 015 402 50 | - | - |
| LOCK WASHER B 6 DIN 127 FOR REGULATOR AT BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| LENS-HD. SCREW AM 6X20 DIN 7985-4S FOR REGULATOR AT BRACKET, WHEEL ARCH PAN |
003 | - | - | ||
| 148 | GROMMET FOR CABLE, VOLTAGE REGULATOR, GENERATOR |
003 | A 00 099 707 81 | - | $1.35 |
| 149 | SOCKET FOR HAND LIGHT |
001 | A 00 054 505 25 | - | $11.93 |
| 150 | LOUD BLAST HORN LOW SOUND |
001 | A 00 054 233 20 | - | - |
| LOUD BLAST HORN HIGH SOUND |
001 | A 00 054 234 20 | - | - | |
| LOUD BLAST HORN LOW SOUND SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 154 209 20 | - | - | |
| LOUD BLAST HORN MIDDLE SOUND SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE |
001 | A 00 154 210 20 | - | - | |
| HEX.-HD. SCREW M 10X28 DIN 931-8 G FOR LOUD BLAST HORN AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR LOUD BLAST HORN AT BRACKET |
002 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR LOUD BLAST HORN AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTION AT LOUD BLAST HORN |
004 | - | - | ||
| CYLINDRICAL SCREW AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT LOUD BLAST HORN |
004 | - | - | ||
| 155 | FIXING CLAMP FOR CABLE TO HORN |
001 | A 00 098 833 78 | - | $0.67 |
| 160 | IGNITION COIL | 001 | A 00 015 806 03 | - | - |
| 161 | FIXING CLAMP FOR IGNITION COIL |
001 | A 00 015 802 40 | - | - |
| CYLINDRICAL SCREW AM 5X40 DIN 84-4 S |
001 | - | - | ||
| SQUARE NUT M 5 DIN 562 |
001 | - | - | ||
| HEX.-HD. SCREW M 6X12 DIN 933-8 G FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| WASHER A 6,4 DIN 9021 FOR IGNITION COIL AT BRACKET |
002 | - | - | ||
| 162 | RUBBER PROTECTIVE CAP FOR IGNITION COIL |
002 | A 00 054 602 35 | - | - |
| 163 | COMPENSATING RESISTANCE | 001 | A 00 015 801 45 | - | - |
| 164 | BRACKET FOR COMPENSATING RESISTANCE |
001 | A 18 015 800 40 | - | - |
| LENS-HD. SHEET METAL SCREW B 3,5X6,5 DIN 7981 FOR COMPENSATING RESISTANCE AT SUPPORT |
002 | - | - | ||
| 165 | ELECTRICAL CABLE FOR COMPENSATING RESISTANCE, IGNITION COIL |
001 | A 18 054 600 02 | - | - |
| RELAY FOR AUTOMATIC STARTING ASSISTANCE WITH DAMPING RESISTOR Replaced by: A 000 542 36 19 |
- | A 00 054 227 19 | - | - | |
| 170 | RELAY FOR AUTOMATIC STARTING ASSISTANCE WITH DAMPING RESISTOR |
001 | A 00 054 236 19 | - | - |
| 171 | BRACKET FOR RELAY |
001 | A 18 054 402 38 | - | - |
| CYLINDRICAL SCREW AM 4X20 DIN 84-4S FOR RELAY AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR RELAY AT BRACKET |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR RELAY AT BRACKET |
002 | - | - | ||
| RELAY FOR CONTROL SWITCH AND HIGHER NUMBER OF REVOLUTION UP TO CHASSIS 9501239 |
002 | A 00 054 227 19 | - | - | |
| FOR CONTROL SWITCH FROM CHASSIS 9501240-002429 |
001 | - | - | ||
| RELAY FOR HIGHER NUMBER OF REVOLUTION FROM CHASSIS 9501240 |
001 | A 00 054 236 19 | - | - | |
| LENS-HD. SCREW AM 4X18 DIN 7985-4 S FOR RELAIS AT LEFT WHEEL ARCH PAN |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR RELAIS AT LEFT WHEEL ARCH PAN |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR RELAIS AT LEFT WHEEL ARCH PAN |
002 | - | - | ||
| REPLACED BY 001 545 12 24 TOGETHER WITH 1 TIGHTENING WASHER 128 350 00 67 UP TO CHASSIS 002534 |
- | A 00 054 582 24 | - | - | |
| 175 | CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP FROM CHASSIS 002535 |
001 | A 00 154 512 24 | - | - |
| GUIDE CAP | 001 | A 00 054 502 38 | - | - | |
| 176 | OPERATION ROD | 001 | A 00 054 500 78 | - | - |
| 177 | TENSION SPRING | 001 | A 00 054 500 97 | - | - |
| 178 | GUIDE CUP FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP |
001 | A 00 054 502 38 | - | - |
| HEX.-HD. SCREW M 6X10 DIN 933-8 G FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP |
001 | - | - | ||
| WASHER 6,4 DIN 125 FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR CONTROL SWITCH AT REAR AXLE SUSPENSION, CENTER, TOP |
001 | - | - | ||
| 180 | TEMPERATURE-WARNING LIGHT FOR "SWITCH BACK" AT JACKET TUBE |
001 | A 00 054 568 15 | - | - |
| TEMPERATURE-WARNING LIGHT WITH ENGLISH INSCRIPTION FOR "SWITCH BACK" AT JACKET TUBE |
001 | A 00 054 569 15 | - | - | |
| 182 | LAMP SOCKET FOR WARNING LIGHT |
001 | A 00 054 511 19 | - | - |
| BULB H 12 V 2 W DIN 72601 FOR WARNING LIGHT |
001 | - | - | ||
| GROMMET FOR WARNING LIGHT |
002 | A 00 099 701 81 | - | $0.47 | |
| CABLE CONNECTOR FOR CABLE FROM SHIFTING LEVER TO CONTROL VALVE |
001 | A 00 054 600 42 | - | - | |
| FIXING CLAMP FOR CABLE TO LIMIT SWITCH |
001 | A 00 098 838 78 | - | $1.36 | |
| 185 | FUSE BOX FOR HIGHER NUMBER OF REVOLUTIONS FROM CHASSIS 9501240 |
001 | A 00 054 530 01 | - | - |
| FUSE 8 AMP. 8 DIN 72581 FROM CHASSIS 9501240 |
001 | - | - | ||
| FUSE 25 AMP. 25 DIN 72481 FROM CHASSIS 9501240 |
001 | - | - | ||
| 186 | BRACKET FOR RELAY AND FUSE BOX FROM CHASSIS 9501240 |
001 | A 12 854 000 73 | - | - |
| 187 | BRACKET FOR FUSE BOX AT BRACKET, BLINKER TRANSMITTER FROM CHASSIS 9501240 |
001 | A 12 854 504 40 | - | - |
| CYLINDRICAL SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX AT BRACKET FROM CHASSIS 9501240 |
002 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR FUSE BOX AT BRACKET FROM CHASSIS 9501240 |
002 | - | - | ||
| 188 | BRACKET FOR ELECTRICAL CABLE AT OIL FILTER FROM CHASSIS 9501240 |
001 | A 12 854 505 40 | - | - |
| FIXING CLAMP AT BRAKE MAGNET FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240 |
001 | A 18 699 504 01 | - | - | |
| FIXING CLAMP A 3 N 285 B AT VENTILATION PLATE FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240 |
001 | - | - | ||
| FIXING CLAMP A 2 N 285 B FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240 |
001 | - | - | ||
| LENS-HD. SCREW AM 4X10 DIN 7985-4 S FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240 |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240 |
001 | - | - | ||
| HEX. NUT M 4 DIN 934-5 S FOR ELECTRICAL CABLE FROM BRAKE MAGNET TO BRACKET FROM CHASSIS 9501240 |
001 | - | - | ||
| FIXING CLAMP A 2 N 285 B FOR CABLE HAMESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240 |
001 | - | - | ||
| LENS-HD. SCREW AM 4X12 DIN 7985-4 S FOR CABLE HAMESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240 |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE HARNESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240 |
001 | - | - | ||
| HEX. NUT M 4 DIN 934 - 5 S FOR CABLE HARNESS AT BRACKET SERVO-AGGREGATE FROM CHASSIS 9501240 |
001 | - | - | ||
| CONTACTOR 12 V FOR EXPORT CARS WITH BLINKER SYSTEM TO AUSTRIA AND PORTUGAL |
001 | A 00 054 227 19 | - | - | |
| ELECTRICAL CABLE ORDER BY THE METER B 1 DIN 72551 SW 80 MM LONG FROM TELAY TEMINAL 30 TO RELAY TERMINAL 86 FOR EXPORT CARS WITH BLINKER S |
001 | - | - | ||
| TERMINAL 4 X 0,8 N 261 FOR EXPORT CARS WITH BLINKER SYSTEM TO AUSTRIA AND PORTUGAL |
005 | - | - | ||
| GROMMET FOR EXPORT CARS WITH BLINKER SYSTEM TO AUSTRIA AND PORTUGAL |
005 | A 00 099 701 81 | - | $0.47 | |
| AUXILIARY CABLE HARNESS FOR EXPORT CARS WITH FOK LIGHT TO THE U.S.A. |
001 | A 12 154 017 09 | - | - | |
| INSULATING HOSE 100-MM LONG ABOVE MAIN CABLE HARNESS ROTARY SWITCH B 20 X 22,4 SW DIN 40 621 ORDER BY THE METER FOR EXPORT CARS WITH FOK |
001 | - | - | ||
| FUSE BOX, 2-POLE FOR EXPORT CARS WITH FOK LIGHT TO THE U.S.A. |
001 | A 00 054 503 01 | - | - | |
| CYLINDRICAL SCREW AM 4X15 DIN 84 - 4 S FOR FUSE BOX AT AIR DUCT, LEFT FOR FUSE BOX AT AIR DUCT, LEFT UP TO CHASSIS 002429FOR EXPORT CARS W |
001 | - | - | ||
DOUBLE TUNE HORN |
- | XXX XXX XXX XXXX | - | - | |
| DOUBLE TUNE HORN, BLACK, WITH PROTECTIVE SCREEN SPECIAL REQUEST |
001 | A 00 054 209 99 | - | - | |
| DOUBLE TUNE HORN, BLACK, WITHOUT PROTECTIVE SCREEN 1 |
- | A 00 054 210 99 | - | - | |
| DOUBLE TUNE HORN, CHROMIUM PLATED, WITH PROTECTIVE SCREEN 1 |
- | A 00 054 211 99 | - | - | |
| RELAY SWITCH 12 VOLT | 001 | A 00 054 227 19 | - | - | |
| PUSH-PULL FLOW-OVER | 001 | A 00 054 510 11 | - | - | |
| BRACKET FOR PUSH-PULL SWITCH VALID ONLY FOR CARS WITHOUT WINDSCREEN WIPER SYSTEM |
001 | A 18 054 401 38 | - | - | |
| BRACKET, LEFT | 001 | A 18 054 005 73 | - | - | |
| BRACKET, RIGHT | 001 | A 18 054 006 73 | - | - | |
| HEX. -HD. SCREW M 10X25 DIN 931-8 G FOR DOUBLE TUNE HORN AT BRACKET |
002 | - | - | ||
| LOCK WASHER B 10 DIN 127 FOR DOUBLE TUNE HORN AT BRACKET |
002 | - | - | ||
| HEX. NUT M 10 DIN 934-5 S FOR DOUBLE TUNE HORN AT BRACKET |
002 | - | - | ||
| ELECTRICAL CABLE 5000-MM LONG A 1,5 DIN 72551 SW ORDER BY THE METER |
001 | - | - | ||
| ELECTRICAL CABLE 1000-MM LONG A 2,5 DIN 72551 SW ORDER BY THE METER |
001 | - | - | ||
| ELECTRICAL CABLE 3250-MM LONG A 1 DIN 72551 SW ORDER BY THE METER |
001 | - | - | ||
| CABLE TERMINAL 4 X 0,8 N 261 |
008 | - | - | ||
| CABLE TERMINAL 6 X 0,8 N 261 |
001 | - | - | ||
| INSULATING HOSE 2,500-MM LONG B 8X9 SW DIN 40621 ORDER BY THE METER |
001 | - | - | ||
| INSULATING HOSE 2,000-MM LONG B 6X7 SW DIN 40621 ORDER BY THE METER |
001 | - | - | ||
| CABLE CONNECTOR 1-POLE B 1 DIN 72586 |
001 | - | - | ||
| GROMMET | 001 | A 00 099 703 81 | - | $0.47 | |
| GROMMET | 002 | A 00 099 721 81 | - | - | |
| CABLE TERMINAL 4 X 1 N 261 |
005 | - | - |
- To find out where to buy the item or equivalent, click on the part number.