Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 189.000 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
BATTERY AND STARTER CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 001 | BATTERY | 001 | A 00 054 147 01 | - | - |
| BATTERY | 001 | A 00 054 134 01 | - | - | |
| SPECIAL COLD START BATTERY 12 V 56 AH SPECIAL REQUEST |
001 | A 00 054 159 01 | - | - | |
| 002 | BATTERY MOUNTING FOR BATTERY AT FRONT WALL |
001 | A 18 654 001 23 | - | - |
| 005 | CYLINDER SHEET METAL SCREW B 6,3X13 DIN 7971 FOR ANGLE RAIL AT BASE PLATE |
002 | - | - | |
| 006 | SHEET METAL NUT FOR ANGLE RAIL AT BASE PLATE |
002 | A 00 099 408 45 | - | - |
| 007 | TIGHTENING SCREW FOR BATTERY MOUNTING |
002 | A 18 654 101 24 | - | $11.17 |
| WASHER 6,4 DIN 125 FOR BATTERY MOUNTING |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR BATTERY MOUNTING |
003 | - | - | ||
| HEX. NUT M 6 DIN 934-5 S FOR BATTERY MOUNTING |
003 | - | - | ||
| 010 | STARTER CABLE POS. POLE |
001 | A 18 854 001 30 | - | - |
| STARTER CABLE POS. POLE |
001 | A 18 954 000 30 | - | - | |
| RUBBER PROTECTIVE CAP FOR STARTER CABLE Replaced by: A 111 546 00 35 |
- | A 13 654 600 35 | - | - | |
| 012 | RUBBER PROTECTIVE CAP FOR STARTER CABLE |
001 | A 11 154 600 35 | - | - |
| 013 | GROUND CABLE BATTERY, STARTER, NEG.POLE |
001 | A 18 854 001 31 | - | - |
| GROUND CABLE BATTERY, STARTER, NEG.POLE |
001 | A 18 954 000 31 | - | - | |
| GROMMET FOR BATTERY CABLE THROUGH BRACKET AT FRONT WALL |
001 | A 00 099 737 81 | - | - | |
| 016 | RUBBER HOSE 18X20 DIA., 20-MM LONG OVER STARTER POS. AND NEG. CABLE |
003 | A 18 099 715 82 | - | $3.50 |
| HEX.-HD. SCREW M 5X10 DIN 933-8 G FOR GROUND CABLE OF HEADLIGHT AT FRONT CROSS MEMBER |
002 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR GROUND CABLE OF HEADLIGHT AT FRONT CROSS MEMBER |
002 | - | - | ||
| 019 | MOUNTING CLAMP FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE |
001 | A 13 699 501 37 | - | $15.60 |
| 020 | MOUNTING CLAMP FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE |
001 | A 18 699 502 37 | - | - |
| 021 | CYLINDRICAL SCREW AM 6X12 DIN 84-4 S FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE |
001 | - | - | |
| 022 | LOCK WASHER B 6 DIN 127 FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE |
001 | - | - | |
| 023 | BRACKET FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE |
001 | A 18 954 502 40 | - | - |
| 024 | MOUNTING CLAMP FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE |
001 | A 13 699 504 20 | - | - |
| CYLINDRICAL SCREW AM 5X10 DIN 84-4 S FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE |
001 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE |
001 | - | - | ||
CABLES |
- | XXX XXX XXX XXXX | - | - | |
| MAIN CABLE SET, LEFT HALF | 001 | A 18 954 000 05 | - | - | |
| MAIN CABLE SET, LEFT HALF UP TO CHASSIS 8500902 |
001 | A 18 954 000 05 | - | - | |
| MAIN CABLE SET, LEFT HALF FROM CHASSIS 8500903 TO 001692 |
001 | A 18 954 004 05 | - | - | |
| 030 | MAIN CABLE SET, LEFT HALF FROM CHASSIS 001693 |
001 | A 18 954 006 05 | - | - |
| MAIN CABLE SET, RIGHT HALF UP TO CHASSIS 8500532 1 CABLE COUPLING 000 545 21 26 FOR ANTI-CREEP DEVICE HAS TO BE DELIVERED UP TO CHA |
001 | A 18 954 001 05 | - | - | |
| 031 | MAIN CABLE SET, RIGHT HALF FROM CHASSIS 001693 |
001 | A 18 954 007 05 | - | - |
| CABLE COUPLING, 1-POLE FOR CABLE 83, MAIN CABLE SET, RIGHT HALF, AT SWITCH FOR ANTICREEP DEVICE UP TO CHASSIS 8500532 |
001 | A 00 054 521 26 | - | - | |
| 032 | CABLE COUPLING, 1-POLE FOR CABLE 83, MAIN CABLE SET, RIGHT HALF, AT SWITCH FOR ANTICREEP DEVICE FROM CHASSIS 8500533 |
001 | A 00 054 526 26 | - | - |
| MAIN CABLE SET, LEFT HALF | 001 | A 18 954 002 05 | - | - | |
| MAIN CABLE SET, LEFT HALF UP TO CHASSIS 8500902 |
001 | A 18 954 002 05 | - | - | |
| MAIN CABLE SET, LEFT HALF FROM CHASSIS 8500903 TO 001692 |
001 | A 18 954 005 05 | - | - | |
| MAIN CABLE SET, LEFT HALF FROM CHASSIS 001693 |
001 | A 18 954 008 05 | - | - | |
| MAIN CABLE SET, RIGHT HALF UP TO CHASSIS 8500532 1 CABLE COUPLING 000 545 21 26 FOR ANTI-CREEP DEVICE HAS TO BE DELIVERED UP TO CHA |
001 | A 18 954 003 05 | - | - | |
| MAIN CABLE SET, RIGHT HALF FROM CHASSIS 001693 |
001 | A 18 954 009 05 | - | - | |
| ADDITIONAL CABLE SET FROM FUSE BOX AND IGNITION COIL TO PRE-RESISTOR FROM CHASSIS 8500578 TO 8500902 (ONLY VALID FOR MAIN CABLE SET 189 540 0 |
001 | A 18 954 009 09 | - | - | |
| 034 | GROMMET FOR MAIN CABLE SET THROUGH PARTITION AND FRONT WALL |
002 | A 18 699 704 81 | - | $2.33 |
| 035 | SLEEVE FOR MAIN CABLE SET, HEADLIGHT |
002 | A 12 098 700 37 | - | $25.71 |
| 036 | GROMMET FOR MAIN CABLE SET THROUGH FRONT WALL AND THROUGH AIR DISTRIBUTOR |
002 | A 18 699 707 81 | - | $2.61 |
| 037 | GROMMET FOR MAIN CABLE SET THROUGH PARDITION AND FRONT WALL |
001 | A 18 399 701 81 | - | $6.44 |
| 038 | GROMMET FOR CABLE SET TO CLOCK |
001 | A 00 099 722 81 | - | $0.98 |
| FIXING CLAMP UNDER RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL Replaced by: A 186 995 02 42 |
- | A 18 699 500 37 | - | - | |
| 039 | FIXING CLAMP UNDER RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
001 | A 18 699 502 42 | - | - |
| 040 | FIXING CLAMP NEAR RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
001 | A 13 699 501 35 | - | - |
| CYLINDRICAL SCREW AM 6X12 DIN 84-4 S FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
002 | - | - | ||
| 043 | MOUNTING CLAMP ON REGULATOR PLATE FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
001 | A 13 699 501 37 | - | $15.60 |
| 044 | MOUNTING CLAMP, NEAR REGULATOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
001 | A 18 199 500 20 | - | - |
| 044 | MOUNTING CLAMP, NEAR REGULATOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
002 | A 18 199 500 20 | - | - |
| MOUNTING CLAMP FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL Replaced by: A 181 995 00 20 |
- | A 18 699 502 20 | - | $11.11 | |
| 045 | MOUNTING CLAMP FOR WINDSCREEN WIPER, CABLE FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
002 | A 18 199 500 20 | - | - |
| CYLINDRICAL SCREW AM 4X12 DIN 84-4 S FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL |
002 | - | - | ||
| MOUNTING CLAMP FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR Replaced by: A 136 995 01 35 |
- | A 18 799 500 37 | - | - | |
| 046 | MOUNTING CLAMP FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR |
002 | A 13 699 501 35 | - | - |
| MOUNTING CLAMP FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR |
001 | A 13 699 501 37 | - | $15.60 | |
| CYLINDRICAL SCREW AM 6X15 DIN 84-4 S FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR |
003 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR |
003 | - | - | ||
| 049 | FIXING CLAMP FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL |
001 | A 13 699 504 20 | - | - |
| FIXING CLAMP FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL |
001 | A 18 699 500 37 | - | - | |
| CYLINDRICAL SCREW AM 4X12 DIN 84-4 S FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL |
001 | - | - | ||
| WASHER A 4,3 DIN 9021 FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL |
001 | - | - | ||
| CYLINDRICAL SCREW AM 4X12 DIN 84-4 S FOR MAIN CABLE SET AT BREATHER CROSS DUCT |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR MAIN CABLE SET AT BREATHER CROSS DUCT |
002 | - | - | ||
| FIXING CLAMP FOR MAIN CABLE SET AT BREATHER CROSS DUCT Replaced by: A 136 995 01 37 |
- | A 13 699 501 35 | - | - | |
| FIXING CLAMP FOR MAIN CABLE SET AT BREATHER CROSS DUCT |
002 | A 13 699 501 37 | - | $15.60 | |
| CYLINDRICAL SCREW AM 6X12 DIN 84-4 S FOR MAIN CABLE SET AT BREATHER CROSS DUCT |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE SET AT BREATHER CROSS DUCT |
002 | - | - | ||
| FIXING CLAMP FOR MAIN CABLE SET AT AIR DUCT, RIGHT |
002 | A 13 699 501 35 | - | - | |
| CYLINDRICAL SCREW AM 6X12 DIN 84-5 S FOR MAIN CABLE SET AT AIR DUCT, RIGHT |
002 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR MAIN CABLE SET AT AIR DUCT, RIGHT |
002 | - | - | ||
| 062 | CABLE CONNECTOR, 3 POLES FOR BLOWER CONNECTION |
002 | A 00 054 635 41 | - | - |
| CYLINDRICAL SHEET METAL SCREW BZ 3,9X13 DIN 7971 FOR CABLE CONNECTOR AT AIR DUCT |
004 | - | - | ||
| 063 | CABLE HARNESS IN JACKET TUBE FROM CHASSIS 001693 |
001 | A 18 954 011 09 | - | - |
| CABLE HARNESS IN JACKET TUBE FROM CHASSIS 001693 |
001 | A 18 954 014 09 | - | - | |
| CABLE HARNESS IN JACKET TUBE FROM CHASSIS 001693 |
001 | A 18 954 010 09 | - | - | |
| ADDITIONAL CABLE HARNESS FROM SLIP RING TO SWITCH FROM CHASSIS 001693 |
001 | A 18 954 012 09 | - | - | |
| 064 | CABLE HARNESS FOR INSTRUMENT LIGHTING |
001 | A 18 654 003 09 | - | - |
| CABLE HARNESS FOR INSTRUMENT LIGHTING |
001 | A 18 654 006 09 | - | - | |
| 066 | CABLE HARNESS FOR CONTROL, SPRING TIGHTENING DEVICE |
001 | A 18 654 007 09 | - | - |
| 067 | CABLE HARNESS FOR CONTROL, SPRING TIGHTENING DEVICE |
001 | A 18 654 012 09 | - | - |
| 068 | GROMMET FOR CABLE HARNESS THROUGH COVER, REVERSING MOTOR |
001 | A 00 099 722 81 | - | $0.98 |
| 070 | RUBBER PROTECTIVE CAP FOR SPRING DRIVE |
002 | A 00 054 602 35 | - | - |
| 071 | CABLE HARNESS FOR GENERATOR REGULATOR |
001 | A 18 954 000 08 | - | - |
| CABLE HARNESS FOR GENERATOR REGULATOR |
001 | A 18 954 001 08 | - | - | |
| ADDITIONAL CABLE HARNESS FROM SWITCH TO CABLE CONNECTOR, FAN MOTOR SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
001 | A 18 954 005 09 | - | - | |
| ADDITIONAL CABLE HARNESS FROM CABLE CONNECTOR TO FAN MOTOR, RIGHT SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
001 | A 18 954 006 09 | - | - | |
| ADDITIONAL CABLE HARNESS FROM FUSE BOX TO CABLE CONNECTOR SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
001 | A 18 954 007 09 | - | - | |
| GROMMET SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
002 | A 00 099 731 81 | - | $0.98 | |
| CABLE CONNECTOR, 5 POLES SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
001 | A 00 054 619 41 | - | - | |
| CABLE CONNECTOR, 3-POLES SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
002 | A 00 054 635 41 | - | - | |
| BRACKET FOR CUT-OFF RELAY AND CABLE FIXING SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
001 | A 18 954 204 40 | - | - | |
| 073 | TAIL LAMP CABLE HARNESS | 001 | A 18 954 000 07 | - | - |
| 076 | FIXING CLAMP FOR TAIL LAMP CABLE HARNESS AT FRONT WALL |
001 | A 18 699 502 42 | - | - |
| CYLINDRICAL SCREW AM 6X15 DIN 84-4 S FOR TAIL LAMP CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR TAIL LAMP CABLE HARNESS AT FRONT WALL |
001 | - | - | ||
| 079 | CABLE BRACKET FOR CABLE SET TO BLOWER SWITCH AT OPERATING LEVER |
001 | A 00 054 603 43 | - | - |
| 79a | RUBBER PROTECTIVE CAP FOR TAIL LAMP CABLE SET AT OIL PRESSURE SWITCH |
002 | A 00 054 602 35 | - | - |
| 080 | CABLE CONNECTOR, 8 POLES | 001 | A 00 054 632 41 | - | $11.05 |
| 080 | CABLE CONNECTOR, 8 POLES | 002 | A 00 054 632 41 | - | $11.05 |
| 081 | CABLE CONNECTOR, 5 POLES | 001 | A 00 054 606 41 | - | - |
| CYLINDRICAL SHEET METAL SCREW BZ 3,9X19 DIN 7971 FOR CABLE CONNECTOR AT BRACKET, SIDE COVER PLATE |
002 | - | - | ||
| 083 | CABLE CONNECTOR, 6-POLES | 001 | A 00 054 617 41 | - | $7.78 |
| CYLINDRICAL SHEET METAL SCREW BZ 3,9X13 DIN 7971 FOR CABLE CONNECTOR AT BODY FRONT END, CROSS STRUT, INSIDE, LEFT |
004 | - | - | ||
Replaced by: A 189 540 00 50 |
- | A 18 654 006 50 | - | - | |
Replaced by: A 189 540 00 50 |
- | A 18 954 005 50 | - | - | |
| FUSE BOX Replaced by: A 189 540 00 50 |
- | A 18 954 002 50 | - | - | |
| 090 | FUSE BOX | 001 | A 18 954 000 50 | - | - |
| 091 | COVER | 001 | A 00 054 502 03 | - | $73.37 |
| 092 | FUSE, 12 AMP. 8 DIN 72581 |
010 | - | - | |
| 093 | FUSE, 35 AMP. 25 DIN 72581 |
002 | - | - | |
| CYLINDRICAL SCREW AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRONT WALL |
002 | - | - | ||
| WASHER 4,3 DIN 125 FOR FUSE BOX AT FRONT WALL |
002 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR FUSE BOX AT FRONT WALL |
002 | - | - | ||
| 097 | UNDERLAYER FOR FUSE BOX AT FRONT WALL |
001 | A 18 654 502 89 | - | $13.36 |
GROUND CABLE |
- | XXX XXX XXX XXXX | - | - | |
| 100 | GROUND CABLE FROM AUXILIARY SPRING MOTOR TO FRAME |
001 | A 18 654 002 41 | - | - |
| HEX.-HD. SCREW M 6X10 DIN 933-8 G FOR GROUND CABLE AT FRAME |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR GROUND CABLE AT FRAME |
001 | - | - | ||
| LOCK WASHER B 4 DIN 127 FOR CABLE CONNECTIONS AT STEERING LOCK |
003 | - | - | ||
| CYLINDRICAL SCREW AM 5X15 DIN 84-4 S FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING |
001 | - | - | ||
| HEX. NUT M 5 DIN 934-5 S FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING |
001 | - | - | ||
| 107 | GROUND CABLE FROM CAPILLARY TUBE TO FRONT WALL |
001 | A 18 654 007 41 | - | - |
| 108 | GROUND CABLE FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE |
001 | A 18 654 003 41 | - | $97.85 |
| GROUND CABLE FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE Replaced by: A 186 540 04 41 |
- | A 18 954 000 41 | - | - | |
| 109 | GROUND CABLE FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE |
001 | A 18 654 004 41 | - | - |
| HEX.-HD. SCREW M 8X15 DIN 933-8 G FOR GROUND CABLE AT FRONT WALL |
001 | - | - | ||
| SPRING WASHER B 8 DIN 137 FOR GROUND CABLE AT FRONT WALL |
001 | - | - | ||
| HEX.-HD. SCREW M 8X18 DIN 933-8 G FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET |
001 | - | - | ||
| LOCK WASHER B 8 DIN 127 FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET |
001 | - | - | ||
| HEX. NUT M 8 DIN 934-5 S FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET |
001 | - | - | ||
| 111 | GROUND CABLE FOR FUEL TRANSMITTER AT END CROSS MEMBER |
001 | A 13 654 601 21 | - | - |
| HEX.-HD. TAPPING SCREW AM 5X10 DIN 7513 FOR GROUND CABLE AT END CROSS MEMBER |
001 | - | - | ||
| LOCK WASHER B 5 DIN 127 FOR GROUND CABLE AT END CROSS MEMBER |
001 | - | - | ||
| 114 | GROUND CABLE BETWEEN IGNITION COIL CONDENSER AND IGNITION COIL FIXING UP TO CHASSIS 8500577 |
001 | A 18 654 006 41 | - | - |
| 114 | GROUND CABLE BETWEEN IGNITION COIL CONDENSER AND IGNITION COIL FIXING UP TO CHASSIS 8500577 |
001 | A 18 654 006 41 | - | - |
| HEX.-HD. SCREW M 6X10 DIN 933-8 G FOR GROUND CONNECTION, AUXILIARY FUEL PUMP |
001 | - | - | ||
| LOCK WASHER B 6 DIN 127 FOR GROUND CONNECTION, AUXILIARY FUEL PUMP |
001 | - | - |
- To find out where to buy the item or equivalent, click on the part number.