Geri Dön

FG 189.011 - ELECTRICAL EQUIPMENT AND INSTRUMENTS Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv

№- Name A* Part number A Part number, Price per Unit., $

BATTERY AND STARTER CABLE
- XXX XXX XXX XXXX - -
001 BATTERY 001 A 00 054 147 01  - -
BATTERY 001 A 00 054 134 01  - -
SPECIAL COLD
START BATTERY 12 V 56 AH SPECIAL REQUEST
001 A 00 054 159 01  - -
002
BATTERY MOUNTING FOR BATTERY AT FRONT WALL
001 A 18 654 001 23  - -
005 CYLINDER SHEET
METAL SCREW B 6,3X13 DIN 7971 FOR ANGLE RAIL AT BASE PLATE
002 - -
006 SHEET METAL NUT
FOR ANGLE RAIL AT BASE PLATE
002 A 00 099 408 45  - -
007 TIGHTENING SCREW
FOR BATTERY MOUNTING
002 A 18 654 101 24  - $11.17
WASHER
6,4 DIN 125 FOR BATTERY MOUNTING
001 - -
LOCK WASHER
B 6 DIN 127 FOR BATTERY MOUNTING
003 - -
HEX. NUT
M 6 DIN 934-5 S FOR BATTERY MOUNTING
003 - -
010 STARTER CABLE
POS. POLE
001 A 18 854 001 30  - -
STARTER CABLE
POS. POLE
001 A 18 954 000 30  - -
RUBBER PROTECTIVE CAP
FOR STARTER CABLE
Replaced by: A  111 546 00 35
- A 13 654 600 35  - -
012 RUBBER PROTECTIVE CAP
FOR STARTER CABLE
001 A 11 154 600 35  - -
013 GROUND CABLE
BATTERY, STARTER, NEG.POLE
001 A 18 854 001 31  - -
GROUND CABLE
BATTERY, STARTER, NEG.POLE
001 A 18 954 000 31  - -
GROMMET
FOR BATTERY CABLE THROUGH BRACKET AT FRONT WALL
001 A 00 099 737 81  - -
016 RUBBER HOSE
18X20 DIA., 20-MM LONG OVER STARTER POS. AND NEG. CABLE
003 A 18 099 715 82  - $3.50
HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR GROUND CABLE OF HEADLIGHT AT FRONT CROSS MEMBER
002 - -
LOCK WASHER
B 5 DIN 127 FOR GROUND CABLE OF HEADLIGHT AT FRONT CROSS MEMBER
002 - -
019 MOUNTING CLAMP
FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE
001 A 13 699 501 37  - $15.60
020 MOUNTING CLAMP
FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE
001 A 18 699 502 37  - -
021 CYLINDRICAL SCREW
AM 6X12 DIN 84-4 S FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE
001 - -
022 LOCK WASHER
B 6 DIN 127 FOR STARTER CABLE, POS. POLE AND CABLE TERMINAL 30 AT HEATING TUBE
001 - -
023 BRACKET
FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE
001 A 18 954 502 40  - -
024 MOUNTING CLAMP
FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE
001 A 13 699 504 20  - -
CYLINDRICAL SCREW
AM 5X10 DIN 84-4 S FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE
001 - -
LOCK WASHER
B 5 DIN 127 FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE
001 - -
HEX. NUT
M 5 DIN 934-5 S FOR STARTER CABLE, POS. POLE AT REGULATOR MOUNTING, PLATE
001 - -

CABLES
- XXX XXX XXX XXXX - -
MAIN CABLE SET, LEFT HALF 001 A 18 954 000 05  - -
MAIN CABLE SET, LEFT HALF
UP TO CHASSIS 8500902
001 A 18 954 000 05  - -
MAIN CABLE SET, LEFT HALF
FROM CHASSIS 8500903 TO 001692
001 A 18 954 004 05  - -
030 MAIN CABLE SET, LEFT HALF
FROM CHASSIS 001693
001 A 18 954 006 05  - -
MAIN CABLE
SET, RIGHT HALF UP TO CHASSIS 8500532 1 CABLE COUPLING 000 545 21 26 FOR ANTI-CREEP DEVICE HAS TO BE DELIVERED UP TO CHA
001 A 18 954 001 05  - -
031 MAIN CABLE
SET, RIGHT HALF FROM CHASSIS 001693
001 A 18 954 007 05  - -
CABLE COUPLING, 1-POLE
FOR CABLE 83, MAIN CABLE SET, RIGHT HALF, AT SWITCH FOR ANTICREEP DEVICE UP TO CHASSIS 8500532
001 A 00 054 521 26  - -
032 CABLE COUPLING, 1-POLE
FOR CABLE 83, MAIN CABLE SET, RIGHT HALF, AT SWITCH FOR ANTICREEP DEVICE FROM CHASSIS 8500533
001 A 00 054 526 26  - -
MAIN CABLE SET, LEFT HALF 001 A 18 954 002 05  - -
MAIN CABLE SET, LEFT HALF
UP TO CHASSIS 8500902
001 A 18 954 002 05  - -
MAIN CABLE SET, LEFT HALF
FROM CHASSIS 8500903 TO 001692
001 A 18 954 005 05  - -
MAIN CABLE SET, LEFT HALF
FROM CHASSIS 001693
001 A 18 954 008 05  - -
MAIN CABLE
SET, RIGHT HALF UP TO CHASSIS 8500532 1 CABLE COUPLING 000 545 21 26 FOR ANTI-CREEP DEVICE HAS TO BE DELIVERED UP TO CHA
001 A 18 954 003 05  - -
MAIN CABLE
SET, RIGHT HALF FROM CHASSIS 001693
001 A 18 954 009 05  - -
ADDITIONAL CABLE SET
FROM FUSE BOX AND IGNITION COIL TO PRE-RESISTOR FROM CHASSIS 8500578 TO 8500902 (ONLY VALID FOR MAIN CABLE SET 189 540 0
001 A 18 954 009 09  - -
034 GROMMET
FOR MAIN CABLE SET THROUGH PARTITION AND FRONT WALL
002 A 18 699 704 81  - $2.33
035 SLEEVE
FOR MAIN CABLE SET, HEADLIGHT
002 A 12 098 700 37  - $25.71
036 GROMMET
FOR MAIN CABLE SET THROUGH FRONT WALL AND THROUGH AIR DISTRIBUTOR
002 A 18 699 707 81  - $2.61
037 GROMMET
FOR MAIN CABLE SET THROUGH PARDITION AND FRONT WALL
001 A 18 399 701 81  - $6.44
038 GROMMET
FOR CABLE SET TO CLOCK
001 A 00 099 722 81  - $0.98
FIXING CLAMP
UNDER RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
Replaced by: A  186 995 02 42
- A 18 699 500 37  - -
039 FIXING CLAMP
UNDER RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
001 A 18 699 502 42  - -
040 FIXING CLAMP
NEAR RIGHT AIR DISTRIBUTOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
001 A 13 699 501 35  - -
CYLINDRICAL SCREW
AM 6X12 DIN 84-4 S FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
002 - -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
002 - -
043 MOUNTING CLAMP
ON REGULATOR PLATE FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
001 A 13 699 501 37  - $15.60
044 MOUNTING CLAMP,
NEAR REGULATOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
001 A 18 199 500 20  - -
044 MOUNTING CLAMP,
NEAR REGULATOR FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
002 A 18 199 500 20  - -
MOUNTING CLAMP
FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
Replaced by: A  181 995 00 20
- A 18 699 502 20  - $11.11
045 MOUNTING CLAMP
FOR WINDSCREEN WIPER, CABLE FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
002 A 18 199 500 20  - -
CYLINDRICAL SCREW
AM 4X12 DIN 84-4 S FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
002 - -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE SET, RIGHT HALF AT FRONT WALL
002 - -
MOUNTING CLAMP
FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR
Replaced by: A  136 995 01 35
- A 18 799 500 37  - -
046 MOUNTING CLAMP
FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR
002 A 13 699 501 35  - -
MOUNTING CLAMP
FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR
001 A 13 699 501 37  - $15.60
CYLINDRICAL SCREW
AM 6X15 DIN 84-4 S FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR
003 - -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET AT BODY FRONT END, REAR WALL AND PEDAL FLOOR
003 - -
049 FIXING CLAMP
FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL
001 A 13 699 504 20  - -
FIXING CLAMP
FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL
001 A 18 699 500 37  - -
CYLINDRICAL SCREW
AM 4X12 DIN 84-4 S FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL
001 - -
WASHER
A 4,3 DIN 9021 FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL
001 - -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE SET, LEFT HALF AT FRONT WALL
001 - -
CYLINDRICAL SCREW
AM 4X12 DIN 84-4 S FOR MAIN CABLE SET AT BREATHER CROSS DUCT
002 - -
LOCK WASHER
B 4 DIN 127 FOR MAIN CABLE SET AT BREATHER CROSS DUCT
002 - -
FIXING CLAMP
FOR MAIN CABLE SET AT BREATHER CROSS DUCT
Replaced by: A  136 995 01 37
- A 13 699 501 35  - -
FIXING CLAMP
FOR MAIN CABLE SET AT BREATHER CROSS DUCT
002 A 13 699 501 37  - $15.60
CYLINDRICAL SCREW
AM 6X12 DIN 84-4 S FOR MAIN CABLE SET AT BREATHER CROSS DUCT
002 - -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET AT BREATHER CROSS DUCT
002 - -
FIXING CLAMP
FOR MAIN CABLE SET AT AIR DUCT, RIGHT
002 A 13 699 501 35  - -
CYLINDRICAL SCREW
AM 6X12 DIN 84-5 S FOR MAIN CABLE SET AT AIR DUCT, RIGHT
002 - -
LOCK WASHER
B 6 DIN 127 FOR MAIN CABLE SET AT AIR DUCT, RIGHT
002 - -
062 CABLE CONNECTOR, 3 POLES
FOR BLOWER CONNECTION
002 A 00 054 635 41  - -
CYLINDRICAL SHEET
METAL SCREW BZ 3,9X13 DIN 7971 FOR CABLE CONNECTOR AT AIR DUCT
004 - -
063 CABLE HARNESS
IN JACKET TUBE FROM CHASSIS 001693
001 A 18 954 011 09  - -
CABLE HARNESS
IN JACKET TUBE FROM CHASSIS 001693
001 A 18 954 014 09  - -
CABLE HARNESS
IN JACKET TUBE FROM CHASSIS 001693
001 A 18 954 010 09  - -
ADDITIONAL CABLE HARNESS
FROM SLIP RING TO SWITCH FROM CHASSIS 001693
001 A 18 954 012 09  - -
064 CABLE HARNESS
FOR INSTRUMENT LIGHTING
001 A 18 654 003 09  - -
CABLE HARNESS
FOR INSTRUMENT LIGHTING
001 A 18 654 006 09  - -
066 CABLE HARNESS
FOR CONTROL, SPRING TIGHTENING DEVICE
001 A 18 654 007 09  - -
067 CABLE HARNESS
FOR CONTROL, SPRING TIGHTENING DEVICE
001 A 18 654 012 09  - -
068 GROMMET
FOR CABLE HARNESS THROUGH COVER, REVERSING MOTOR
001 A 00 099 722 81  - $0.98
070 RUBBER PROTECTIVE CAP
FOR SPRING DRIVE
002 A 00 054 602 35  - -
071 CABLE HARNESS
FOR GENERATOR REGULATOR
001 A 18 954 000 08  - -
CABLE HARNESS
FOR GENERATOR REGULATOR
001 A 18 954 001 08  - -
073 TAIL LAMP CABLE HARNESS 001 A 18 954 000 07  - -
076 FIXING CLAMP
FOR TAIL LAMP CABLE HARNESS AT FRONT WALL
001 A 18 699 502 42  - -
CYLINDRICAL SCREW
AM 6X15 DIN 84-4 S FOR TAIL LAMP CABLE HARNESS AT FRONT WALL
001 - -
LOCK WASHER
B 6 DIN 127 FOR TAIL LAMP CABLE HARNESS AT FRONT WALL
001 - -
079 CABLE BRACKET
FOR CABLE SET TO BLOWER SWITCH AT OPERATING LEVER
001 A 00 054 603 43  - -
79a RUBBER PROTECTIVE CAP
FOR TAIL LAMP CABLE SET AT OIL PRESSURE SWITCH
002 A 00 054 602 35  - -
080 CABLE CONNECTOR, 8 POLES 001 A 00 054 632 41  - $11.05
080 CABLE CONNECTOR, 8 POLES 002 A 00 054 632 41  - $11.05
081 CABLE CONNECTOR, 5 POLES 001 A 00 054 606 41  - -
CYLINDRICAL SHEET
METAL SCREW BZ 3,9X19 DIN 7971 FOR CABLE CONNECTOR AT BRACKET, SIDE COVER PLATE
002 - -
083 CABLE CONNECTOR, 6-POLES 001 A 00 054 617 41  - $7.78
CYLINDRICAL SHEET
METAL SCREW BZ 3,9X13 DIN 7971 FOR CABLE CONNECTOR AT BODY FRONT END, CROSS STRUT, INSIDE, LEFT
004 - -

Replaced by: A  189 540 00 50
- A 18 654 006 50  - -

Replaced by: A  189 540 00 50
- A 18 954 005 50  - -
FUSE BOX
Replaced by: A  189 540 00 50
- A 18 954 002 50  - -
090 FUSE BOX 001 A 18 954 000 50  - -
091 COVER 001 A 00 054 502 03  - $73.37
092 FUSE, 12 AMP.
8 DIN 72581
010 - -
093 FUSE, 35 AMP.
25 DIN 72581
002 - -
CYLINDRICAL SCREW
AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRONT WALL
002 - -
WASHER
4,3 DIN 125 FOR FUSE BOX AT FRONT WALL
002 - -
LOCK WASHER
B 4 DIN 127 FOR FUSE BOX AT FRONT WALL
002 - -
097 UNDERLAYER
FOR FUSE BOX AT FRONT WALL
001 A 18 654 502 89  - $13.36

GROUND CABLE
- XXX XXX XXX XXXX - -
100 GROUND CABLE
FROM AUXILIARY SPRING MOTOR TO FRAME
001 A 18 654 002 41  - -
HEX.-HD. SCREW
M 6X10 DIN 933-8 G FOR GROUND CABLE AT FRAME
001 - -
LOCK WASHER
B 6 DIN 127 FOR GROUND CABLE AT FRAME
001 - -
LOCK WASHER
B 4 DIN 127 FOR CABLE CONNECTIONS AT STEERING LOCK
003 - -
CYLINDRICAL SCREW
AM 5X15 DIN 84-4 S FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING
001 - -
LOCK WASHER
B 5 DIN 127 FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING
001 - -
HEX. NUT
M 5 DIN 934-5 S FOR GROUND CABLE, BLINKER TRANSMITTER AND INSTRUMENT PANEL LIGHTING
001 - -
107 GROUND CABLE
FROM CAPILLARY TUBE TO FRONT WALL
001 A 18 654 007 41  - -
108 GROUND CABLE
FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE
001 A 18 654 003 41  - $97.85
GROUND CABLE
FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE
Replaced by: A  186 540 04 41
- A 18 954 000 41  - -
109 GROUND CABLE
FOR EARTHING BETWEEN FRONT WALL RESP. FRAME AND ENGINE
001 A 18 654 004 41  - -
HEX.-HD. SCREW
M 8X15 DIN 933-8 G FOR GROUND CABLE AT FRONT WALL
001 - -
SPRING WASHER
B 8 DIN 137 FOR GROUND CABLE AT FRONT WALL
001 - -
HEX.-HD. SCREW
M 8X18 DIN 933-8 G FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET
001 - -
LOCK WASHER
B 8 DIN 127 FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET
001 - -
HEX. NUT
M 8 DIN 934-5 S FOR GROUND CABLE FROM MOTOR TO FRAME AT BRACKET
001 - -
111 GROUND CABLE
FOR FUEL TRANSMITTER AT END CROSS MEMBER
001 A 13 654 601 21  - -
HEX.-HD. TAPPING SCREW
AM 5X10 DIN 7513 FOR GROUND CABLE AT END CROSS MEMBER
001 - -
LOCK WASHER
B 5 DIN 127 FOR GROUND CABLE AT END CROSS MEMBER
001 - -
114 GROUND CABLE
BETWEEN IGNITION COIL CONDENSER AND IGNITION COIL FIXING UP TO CHASSIS 8500577
001 A 18 654 006 41  - -
114 GROUND CABLE
BETWEEN IGNITION COIL CONDENSER AND IGNITION COIL FIXING UP TO CHASSIS 8500577
001 A 18 654 006 41  - -
HEX.-HD. SCREW
M 6X10 DIN 933-8 G FOR GROUND CONNECTION, AUXILIARY FUEL PUMP
001 - -
LOCK WASHER
B 6 DIN 127 FOR GROUND CONNECTION, AUXILIARY FUEL PUMP
001 - -
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.