Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
M 121.921 - CYLINDER CRANKCASE, OIL PAN Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
ENGINE |
- | XXX XXX XXX XXXX | - | - | |
| REPLACED BY 121 010 68 00 TOGETHER WITH 1 EXHAUST MANIFOLD 121 140 06 14 |
- | A 12 101 001 00 | - | - | |
| ENGINE, COMPLETE Replaced by: A 121 010 68 00 |
- | A 12 101 018 00 | - | - | |
| ENGINE, COMPLETE | 001 | A 12 101 068 00 | - | - | |
| ENGINE, COMPLETE Replaced by: A 121 010 69 00 |
- | A 12 101 003 00 | - | - | |
| ENGINE, COMPLETE | 001 | A 12 101 069 00 | - | - | |
| ENGINE, COMPLETE | 001 | A 12 101 060 02 | - | - | |
CYLINDER CRANKCASE |
- | XXX XXX XXX XXXX | - | - | |
Replaced by: A 121 010 43 08 |
- | A 12 101 007 08 | - | - | |
Replaced by: A 121 010 43 08 |
- | A 12 101 011 08 | - | - | |
| CYLINDER CRANKCASE Replaced by: A 121 010 43 08 |
- | A 12 101 034 08 | - | - | |
| 001 | CYLINDER CRANKCASE | 001 | A 12 101 043 08 | - | - |
| EXPANSION PLUG FOR CORE HOLES Replaced by: A 636 997 15 25 |
- | B 25 N 59 5N59a | - | - | |
| EXPANSION PLUG FOR CORE HOLES |
002 | A 63 699 715 25 | - | $14.44 | |
| EXPANSION PLUG FOR CORE HOLES |
001 | A 63 699 715 25 | - | $14.44 | |
| REPLACED BY 636 997 13 25 FOR CORE HOLES Replaced by: A 636 997 13 25 |
- | B 30 N 59 0N59a | - | - | |
| EXPANSION PLUG FOR CORE HOLES Replaced by: A 636 997 13 25 |
- | A 63 699 705 25 | - | - | |
| EXPANSION PLUG FOR CORE HOLES |
002 | A 63 699 713 25 | - | $14.16 | |
| REPLACED BY 636 997 12 25 FOR CORE HOLES Replaced by: A 636 997 12 25 |
- | B 35 N 59 5N59a | - | - | |
| EXPANSION PLUG FOR CORE HOLES Replaced by: A 636 997 12 25 |
- | A 63 699 708 25 | - | - | |
| EXPANSION PLUG FOR CORE HOLES |
004 | A 63 699 712 25 | - | $14.02 | |
| EXPANSION PLUG FOR CORE HOLES |
002 | A 63 699 712 25 | - | $14.02 | |
| EXPANSION PLUG FOR CORE HOLES |
001 | A 63 699 712 25 | - | $14.02 | |
| REPLACED BY 636 997 11 25 FOR CORE HOLES Replaced by: A 636 997 11 25 |
- | B 40 N 59 0N59a | - | - | |
| EXPANSION PLUG FOR CORE HOLES Replaced by: A 636 997 11 25 |
- | A 63 699 704 25 | - | - | |
| EXPANSION PLUG FOR CORE HOLES |
002 | A 63 699 711 25 | - | $13.52 | |
| 002 | SCREW PLUG M 30X1,5 DIN 906 DBL 8451-21 FOR CORE HOLES |
004 | - | - | |
| 003 | SCREW PLUG M 38X1,5 DIN 906 DBL 8451-21 FOR CORE HOLES |
002 | - | - | |
Replaced by: A 121 011 07 11 |
- | A 12 101 101 11 | - | - | |
Replaced by: A 121 011 07 11 |
- | A 12 101 104 11 | - | - | |
Replaced by: A 121 011 07 11 |
- | A 12 101 105 11 | - | - | |
| CRANKSHAFT BEARING CAP (FOR 1ST AND 3RD CRANKSHAFT BEARINGS) Replaced by: A 121 011 07 11 |
- | A 12 101 106 11 | - | - | |
| 005 | CRANKSHAFT BEARING CAP (FOR 1ST AND 3RD CRANKSHAFT BEARINGS) |
002 | A 12 101 107 11 | - | - |
| CRANKSHAFT BEARING CAP WITH DOWEL PIN FOR 2ND CRANKSHAFT BEARING |
- | A 12 101 003 23 | - | - | |
| CRANKSHAFT BEARING CAP WITH DOWEL PIN FOR 2ND CRANKSHAFT BEARING |
- | A 12 101 001 23 | - | - | |
| CRANKSHAFT BEARING CAP WITH DOWEL PIN FOR 2ND CRANKSHAFT BEARING |
- | A 12 101 006 23 | - | - | |
| REPLACED BY 121 011 12 12 FOR 2ND CRANKSHAFT BEARING Replaced by: A 121 011 12 12 |
- | A 12 101 007 23 | - | - | |
| REPLACED BY 121 011 12 12 FOR 2ND CRANKSHAFT BEARING Replaced by: A 121 011 12 12 |
- | A 12 101 008 23 | - | - | |
| CRANKSHAFT BEARING CAP (FOR LAPPED BEARING SHELL) FOR 2ND CRANKSHAFT BEARING Replaced by: A 121 011 12 12 |
- | A 12 101 009 23 | - | - | |
| 006 | CRANKSHAFT BEARING CAP (FOR LAPPED BEARING SHELL) FOR 2ND CRANKSHAFT BEARING |
001 | A 12 101 112 12 | - | - |
| DOWEL PIN FOR 2ND CRANKSHAFT BEARING Replaced by: A 121 991 00 61 |
- | A 12 199 100 41 | - | - | |
| DOWEL PIN FOR 2ND CRANKSHAFT BEARING |
004 | A 12 199 100 61 | - | $10.43 | |
| GUARD PLATE HALF, 2.00-MM = STANDARD REPLACED BY 2 LAPPED BEARING SHELL 621 033 00 07 Replaced by: A 121 011 00 52 |
- | A 12 001 100 52 | - | - | |
| GUARD PLATE HALF, 2.00-MM = STANDARD REPLACED BY 2 LAPPED BEARING SHELL 621 033 00 07 |
- | A 12 101 100 52 | - | - | |
| GUARD PLATE HALF, 2.05-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 00 07 Replaced by: A 121 011 01 52 |
- | A 12 001 101 52 | - | - | |
| GUARD PLATE HALF, 2.05-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 00 07 |
- | A 12 101 101 52 | - | - | |
| GUARD PLATE HALF, 2. 10-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 01 07 OR 621 033 02 07 ACCORDING TO REPAIR SIZE Replaced by: A 121 011 02 52 |
- | A 12 001 102 52 | - | - | |
| GUARD PLATE HALF, 2. 10-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 01 07 OR 621 033 02 07 ACCORDING TO REPAIR SIZE |
- | A 12 101 102 52 | - | - | |
| GUARD PLATE HALF, 2. 15-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 01 07 OR 621 033 02 07 ACCORDING TO REPAIR SIZE Replaced by: A 121 011 03 52 |
- | A 12 001 104 52 | - | - | |
| GUARD PLATE HALF, 2. 15-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 01 07 OR 621 033 02 07 ACCORDING TO REPAIR SIZE |
- | A 12 101 103 52 | - | - | |
| GUARD PLATE HALF, 2.20-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 01 07 OR 621 033 02 07 ACCORDING TO REPAIR SIZE Replaced by: A 121 011 04 52 |
- | A 12 001 103 52 | - | - | |
| GUARD PLATE HALF, 2.20-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 01 07 OR 621 033 02 07 ACCORDING TO REPAIR SIZE |
- | A 12 101 104 52 | - | - | |
| GUARD PLATE HALF, 2.25-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 03 07 OR 621 033 04 07 ACCORDING TO REPAIR SIZE Replaced by: A 121 011 05 52 |
- | A 12 001 105 52 | - | - | |
| GUARD PLATE HALF, 2.25-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 03 07 OR 621 033 04 07 ACCORDING TO REPAIR SIZE |
- | A 12 101 105 52 | - | - | |
| GUARD PLATE HALF, 2.30-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 03 07 OR 621 033 04 07 ACCORDING TO REPAIR SIZE Replaced by: A 121 011 06 52 |
- | A 12 001 106 52 | - | - | |
| GUARD PLATE HALF, 2.30-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 03 07 OR 621 033 04 07 ACCORDING TO REPAIR SIZE |
- | A 12 101 106 52 | - | - | |
| GUARD PLATE HALF, 2.35-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 03 07 OR 621 033 04 07 ACCORDING TO REPAIR SIZE Replaced by: A 121 011 07 52 |
- | A 12 001 107 52 | - | - | |
| GUARD PLATE HALF, 2.35-MM THICK REPLACED BY 2 LAPPED BEARING SHELL 621 033 03 07 OR 621 033 04 07 ACCORDING TO REPAIR SIZE |
- | A 12 101 107 52 | - | - | |
| WASHER 13 DIN 433 CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
004 | - | - | ||
| WASHER 15 DIN 433 CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
002 | - | - | ||
| HEX. SOCKET SCREW (FOR 1ST AND 3RD BEARINGS) M 12X70 DIN 912-10 K CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
004 | - | - | ||
| HEX. SOCKET SCREW (FOR LAPPED BEARING) M 14X70 DIN 912-10 K CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
002 | - | - | ||
| WASHER CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
005 | A 12 199 012 40 | - | - | |
| WASHER CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
006 | A 12 199 012 40 | - | - | |
| 010 | SPRING WASHER B 12 DIN 137 CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
006 | - | - | |
| 011 | HEX. HEAD SCREW M 12X75 DIN 931-10 K CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
001 | - | - | |
| 011 | HEX. HEAD SCREW M 12X75 DIN 931-10 K CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
005 | - | - | |
| 012 | SCREW CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
001 | A 12 101 100 71 | - | - |
| 013 | CYLINDRICAL PIN 10 M6X16 DIN 7 CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
003 | - | - | |
| 014 | CYLINDRICAL PIN 8 M6X16 DIN 7 CRANKSHAFT BEARING CAPS TO CYLINDER CRANKCASE |
003 | - | - | |
| EXPANSION PLUG (TO PLUG FEELER GAUGE HOLE AT THE REAR OF CYLINDER CRANKCASE) Replaced by: A 636 997 15 25 |
- | B 25 N 59 5N59a | - | - | |
| 015 | EXPANSION PLUG (TO PLUG FEELER GAUGE HOLE AT THE REAR OF CYLINDER CRANKCASE) |
001 | A 63 699 715 25 | - | $14.44 |
| CYLINDRICAL PIN INTERMEDIATE PLATE TO CYLINDER CRANKCASE |
001 | A 18 699 107 01 | - | - | |
| 016 | DOWEL PIN INTERMEDIATE PLATE TO CYLINDER CRANKCASE |
001 | A 18 099 100 60 | - | $0.44 |
| CYLINDRICAL PIN INTERMEDIATE PLATE TO CYLINDER CRANKCASE |
001 | A 18 699 108 01 | - | - | |
| 017 | DOWEL PIN INTERMEDIATE PLATE TO CYLINDER CRANKCASE |
001 | A 18 099 101 60 | - | $2.28 |
| DOWEL PIN (RECESSED, 8-MM-DIA. TIGHT FIT) IN CASE OF CYLINDER CRANKCASE WITH 8-MM-DIA. DOWEL PIN, CLUTCH HOUSING WITH 12-MM-DIA. |
001 | A 18 099 101 62 | - | - | |
| DOWEL PIN (RECESSED, 12-MM-DIA. TIGHT FIT) IN CASE OF CYLINDER CRANKCASEWITH 12-MM-DIA. DOWEL PIN, CLUTCH HOUSING WITH 8-MM-DIA. |
001 | A 18 099 102 62 | - | $11.10 | |
| DOWEL PIN (RECESSED, 12-MM-DIA. TIGHT FIT) IN CASE OF CYLINDER CRANKCASE WITH 12-MM-DIA. DOWEL PIN AND INTERMEDIATE PLATE WITH 8- |
001 | A 18 099 104 62 | - | $2.43 | |
| DOWEL PIN (RECESSED, 12-MM-DIA. TIGHT FIT) IN CASE OF CYLINDER CRANKCASE WITH 12-MM-DIA. DOWEL PIN, INTERMEDIATE PLATE WITH 8-MM- |
001 | A 18 099 103 62 | - | - | |
| LOCK PIN (FOR FABRIC SEAL RING) |
001 | A 18 699 100 55 | - | $6.32 | |
| WATER DISTRIBUTOR | 002 | A 18 001 600 60 | - | $63.35 | |
| WATER DISTRIBUTOR | 004 | A 18 001 601 60 | - | $80.15 | |
| 018 | SCREW PLUG (TO PLUG OIL CHANNEL, FRONT AND REAR) M 16X1,5 DIN 906-4 S |
003 | - | - | |
| SCREW PLUG FOR OIL PRESSURE RELIEF VALVE Replaced by: A 127 184 01 56 |
- | A 12 199 700 30 | - | - | |
| 019 | SCREW PLUG FOR OIL PRESSURE RELIEF VALVE |
001 | A 12 718 401 56 | - | - |
| 020 | SEAL RING A 24X30 DIN 7603 A1 FOR OIL PRESSURE RELIEF VALVE |
001 | - | - | |
| BRACKET FOR SUPPORT OF AIR INTAKE PIPE |
001 | A 12 109 401 41 | - | $10.29 | |
| BRACKET FOR SUPPORT OF AIR INTAKE PIPE |
001 | A 12 109 403 41 | - | $64.62 | |
| SPRING WASHER B 6 DIN 137 BRACKET TO CYLINDER SIDE COVER |
002 | - | - | ||
| HEX. SOCKET SCREW M 6X18 DIN 912-8 G BRACKET TO CYLINDER SIDE COVER |
002 | - | - | ||
| HEX. HEAD SCREW M 8X15 DIN 933-8 G BRACKET TO CYLINDER CRANKCASE |
002 | - | - | ||
| SPRING WASHER B 8 DIN 137 BRACKET TO CYLINDER CRANKCASE |
002 | - | - | ||
| 024 | CYLINDRICAL PIN (CYLINDER HEAD TO CYLINDER CRANKCASE) 10 M6X14 DIN 7 |
002 | - | - | |
| STUD M 8X30 DIN 939-10 K TIGHTENING SCREW TO CYLINDER CRANKCASE |
001 | - | - | ||
| 025 | STUD M 10X30 DIN 939-10 K TIGHTENING SCREW TO CYLINDER CRANKCASE |
001 | - | - | |
| STUD M 8X18 DIN 939-8 G FOR GENERATOR SUPPORT |
002 | - | - | ||
| 026 | STUD M 10X18 DIN 939-5 S FOR GENERATOR SUPPORT |
002 | - | - | |
CYLINDER SIDE COVER |
- | XXX XXX XXX XXXX | - | - | |
| 028 | CYLINDER SIDE COVER (AT STARTER MOTOR SIDE) |
001 | A 12 101 500 05 | - | $163.24 |
| 029 | GASKET CYLINDER SIDE COVER TO CYLINDER CRANKCASE, STARTER MOTOR SIDE |
001 | A 12 101 501 21 | - | - |
| 030 | HEX. SOCKET SCREW M 6X12 DIN 912-8 G CYLINDER SIDE COVER TO CYLINDER CRANKCASE, STARTER MOTOR SIDE |
020 | - | - | |
| 031 | WASHER CYLINDER SIDE COVER TO CYLINDER CRANKCASE, STARTER MOTOR SIDE |
016 | A 18 099 010 40 | - | - |
| HEX. SOCKET SCREW M 8X1X15 DIN 912-6 G CYLINDER SIDE COVER TO CYLINDER CRANKCASE, STARTER MOTOR SIDE |
001 | - | - | ||
| WASHER 8,4 DIN 433 CYLINDER SIDE COVER TO CYLINDER CRANKCASE, STARTER MOTOR SIDE |
001 | - | - | ||
| SEAL RING A 6X10 DIN 7603 A1 TO PLUG PASSAGE HOLES FOR DOUBLE LEVER SUPPORT |
002 | - | - | ||
| HEX. HEAD SCREW M 6X10 DIN 933-8 G TO PLUG PASSAGE HOLES FOR DOUBLE LEVER SUPPORT |
002 | - | - | ||
| 032 | CYLINDER SIDE COVER (AT SPARK PLUG SIDE) |
001 | A 12 101 003 10 | - | $123.72 |
| 033 | GASKET CYLINDER SIDE COVER TO CYLINDER CRANKCASE, SPARK PLUG SIDE |
001 | A 12 101 502 21 | - | - |
| 034 | HEX. HEAD SCREW M 6X12 DIN 912-8 G CYLINDER SIDE COVER TO CYLINDER CRANKCASE, SPARK PLUG SIDE |
018 | - | - | |
| 035 | WASHER CYLINDER SIDE COVER TO CYLINDER CRANKCASE, SPARK PLUG SIDE |
018 | A 18 099 010 40 | - | - |
| REPLACED BY AND M 14X1, 5X12 DIN 961-8 G DBL 8451-21 C 14X18 DIN 7603 CU AS C M 14X1,4 DIN 71401 |
- | - | - | ||
| REPLACED BY AND M 14X1, 5X12 DIN 961-8 G DBL 8451-21 C 14X18 DIN 7603 CU AS |
- | A 62 199 700 36 | - | - | |
| 036 | HEX. HEAD SCREW M 14X1, 5X12 DIN 961-8 G DBL 8451-21 LATERAL WATER DRAIN AT CYLINDER CRANKCASE |
001 | - | - | |
| 037 | SEAL RING C 14X18 DIN 7603 CU AS LATERAL WATER DRAIN AT CYLINDER CRANKCASE |
001 | - | - | |
| 038 | HEX. HEAD SCREW M 6X10 DIN 933-8 G TO PLUG PASSAGE HOLE FOR SERVO UNIT SUPPORT |
001 | - | - | |
| 039 | SEAL RING A 6X10 DIN 7603 A1 TO PLUG PASSAGE HOLE FOR SERVO UNIT SUPPORT |
001 | - | - | |
| 040 | LOCK PIN (FOR FABRIC SEAL RING) |
001 | A 18 699 100 55 | - | $6.32 |
| BUSHING (FOR INTERMEDIATE GEAR SHAFT, REAR) SEE GROUP 05 |
001 | A 18 005 210 06 | - | - | |
| BEARING WITH BUSHING (FOR IGNITION DISTRIBUTOR AND OIL PUMP DRIVE) SEE GROUP 15 |
001 | A 18 015 001 07 | - | $107.53 | |
| 042 | FLANGED BUSHING (TACHOMETER ANGLE DRIVE TO CYLINDER CRANKCASE) |
001 | A 12 106 401 32 | - | $267.91 |
| 043 | GASKET FLANGED BUSHING TO CYLINDER CRANKCASE |
001 | A 18 001 101 79 | - | - |
| 044 | HEX. SOCKET SCREW M 6X12 DIN 912-6 G FLANGED BUSHING TO CYLINDER CRANKCASE |
004 | - | - | |
| 045 | SPRING WASHER A 6 DIN 137 FLANGED BUSHING TO CYLINDER CRANKCASE |
004 | - | - | |
| REPLACED BY 180 011 06 05 TOGETHER WITH 1 ENGINE SUPPORT, REAR, LEFT 121 223 27 04 1 HEX. SOCKET SCREW M 12X40 DIN 912-8 G 1 WASHER |
- | A 18 001 101 05 | - | - | |
| REPLACED BY 180 011 06 05 TOGETHER WITH 1 ENGINE SUPPORT, REAR, LEFT 121 223 27 04 1 HEX. SOCKET SCREW M 12X40 DIN 912-8 G 1 WASHER |
- | A 18 001 105 05 | - | - | |
| INTERMEDIATE PLATE (8-MM-DIA. FITTED HOLE) FOR CYLINDER CRANKCASE STARTER MOTOR |
001 | A 18 001 106 05 | - | - | |
| INTERMEDIATE PLATE (12-MM-DIA. FITTED HOLE) FOR CYLINDER CRANKCASE STARTER MOTOR Replaced by: A 180 011 11 05 |
- | A 18 001 113 05 | - | - | |
| 046 | INTERMEDIATE PLATE (12-MM-DIA. FITTED HOLE) FOR CYLINDER CRANKCASE STARTER MOTOR |
001 | A 18 001 111 05 | - | - |
| 047 | HEX. HEAD SCREW M 10X15 DIN 933-8 G INTERMEDIATE PLATE TO CYLINDER CRANKCASE |
003 | - | - | |
| 048 | SPRING WASHER B 10 DIN 137 INTERMEDIATE PLATE TO CYLINDER CRANKCASE |
003 | - | - | |
OIL PAN |
- | XXX XXX XXX XXXX | - | - | |
| REPLACED BY 121 010 10 13 TOGETHER WITH 1 FABRIC SEAL RING 000 997 49 41 |
- | A 12 101 001 13 | - | - | |
| REPLACED BY 121 010 10 13 TOGETHER WITH 1 FABRIC SEAL RING 000 997 49 41 |
- | A 12 101 006 13 | - | - | |
| 050 | OIL PAN | 001 | A 12 101 010 13 | - | $899.46 |
| 051 | LOCK PIN (FOR FABRIC SEAL RING) |
001 | A 18 699 100 55 | - | $6.32 |
| GUIDE TUBE (IN OIL PAN FOR OIL DIPSTICK) Replaced by: A 180 010 00 66 |
- | A 12 101 000 66 | - | - | |
| 052 | GUIDE TUBE (IN OIL PAN FOR OIL DIPSTICK) |
001 | A 18 001 000 66 | - | - |
| SEAL RING (FOR BREATHER FILTER) Replaced by: A 198 997 00 40 |
- | A 18 099 700 40 | - | - | |
| 053 | SEAL RING (FOR BREATHER FILTER) |
001 | A 19 899 700 40 | - | $0.86 |
| 055 | OIL DIPSTICK WITH BREATHER FILTER |
001 | A 12 101 000 72 | - | - |
| 056 | SEAL RING C 26X32 DIN 7603 CU AS FOR OIL DRAIN OF OIL PAN |
001 | - | - | |
| 057 | SCREW PLUG FOR OIL DRAIN OF OIL PAN |
001 | A 13 699 712 30 | - | - |
| 059 | HEX. SOCKET SCREW M 6X15 DIN 912-8 G OIL PAN TO CYLINDER CRANKCASE |
018 | - | - | |
| 059 | HEX. SOCKET SCREW M 6X15 DIN 912-8 G OIL PAN TO CYLINDER CRANKCASE |
016 | - | - | |
| HEX. SOCKET SCREW M 6X25 DIN 912-8 G OIL PAN TO CYLINDER CRANKCASE |
002 | - | - | ||
| 060 | HEX. SOCKET SCREW M 6X60 DIN 912-8 G OIL PAN TO CYLINDER CRANKCASE |
002 | - | - | |
| 061 | WASHER 6,4 DIN 433 OIL PAN TO CYLINDER CRANKCASE |
018 | - | - | |
| 062 | HEX. SOCKET SCREW M 8X30 DIN 912-8 G OIL PAN TO CYLINDER CRANKCASE |
002 | - | - | |
| 063 | HEX. SOCKET SCREW M 8X90 DIN 912-8 G OIL PAN TO CYLINDER CRANKCASE |
002 | - | - | |
| 064 | WASHER 8,4 DIN 433 OIL PAN TO CYLINDER CRANKCASE |
004 | - | - |
- To find out where to buy the item or equivalent, click on the part number.