Geri Dön

M 127.980 - INJECTION PUMP Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv

№- Name A* Part number A Part number, Price per Unit., $

INJECTION PUMP		 - XXX XXX XXX XXXX - -
INJECTION PUMP
WITH 2 DISTRIBUTOR CASES AND 6 INJECTION VALVES
Replaced by: A  127 070 00 99		 - A 00 207 428 01  - -
INJECTION PUMP
WITH 2 DISTRIBUTOR CASES AND 6 INJECTION VALVES		 001 A 12 707 000 99  - -
005 PIPE CONNECTION
FOR PRESSURE VALVE BRACKET		 002 A 00 007 800 68  - -
008 OILER PLATE IN SCREW LID 002 A 00 007 400 58  - -
009 DIPSTICK 001 A 00 007 418 60  - -
010 STARTMAGNETO 001 A 00 007 401 88  - -
011 THERMOSTAT
FOR COLD START AND COOLING WATER		 002 A 00 020 377 75  - -
SPRINGY GUIDE PIN
GUIDE PIN SPRING FOR INJECTION PUMP REPAIR DESIGN SEE WORKSHOP MANUAL 07-10/15		 001 A 00 014 100 69  - -
SHIM 0.1 MM THICK
OPTIONAL REPAIR DESIGN SEE WORKSHOP MANUAL 07-10/15		 NB A 12 707 401 52  - -
SHIM 0.3 MM THICK
OPTIONAL REPAIR DESIGN SEE WORKSHOP MANUAL 07-10/15		 NB A 12 707 402 52  - -
SHIM 0.8 MM THICK
OPTIONAL REPAIR DESIGN SEE WORKSHOP MANUAL 07-10/15		 NB A 12 707 403 52  - -
SHIM 0.4 MM THICK
OPTIONAL REPAIR DESIGN SEE WORKSHOP MANUAL 07-10/15		 n-B A 12 707 400 52  - -
015 FOLLOWER
FOR INJECTION PUMP		 001 A 62 107 700 09  - $29.88
WOODRUFF KEY
3X5 DIN 6888 FOR FOLLOWER AT INJECTION PUMP IS DELIVERED WITH INJECTION PUMP		 001 - -
LOCK WASHER
B 12 DIN 127 FOR FOLLOWER AT INJECTION PUMP IS DELIVERED WITH INJECTION PUMP		 001 - -
HEX. NUT
M 12 DIN 936-5 S FOR FOLLOWER AT INJECTION PUMP IS DELIVERED WITH INJECTION PUMP		 001 - -
019 BRACKET
FOR ELECTRICAL CABLE TO TEMPERATURE SWITCH		 001 A 12 715 000 73  - -
FIXING CLAMP
1X8 DIN 72571 FOR ELECTRICAL CABLE TO TEMPERATURE SWITCH		 001 - -
LOCK WASHER
B 4 DIN 127 FOR FIXING CLAMP AT BRACKET		 001 - -
CYLINDRICAL SCREW
AM 4X10 DIN 84-4 S FOR FIXING CLAMP AT BRACKET		 001 - -
REPLACED BY 000 078 01 95
IN SUCTION PIPE CAN ONLY BE EXCHANGED IN SETS FOR CYLINDES 1-3 OR 4-6 RESP.
Replaced by: A  000 078 00 95		 - A 00 007 801 23  - -
NOZZLE SET
Replaced by: A  000 078 01 95		 - A 00 007 800 95  - -
020 NOZZLE SET 002 A 00 007 801 95  - -
WASHER
FOR INJECTION VALVE AT SUCTION TUBE WAS NOT INSTALLED		 - A 18 999 003 40  - -
UNION NUT
FOR INJECTION VALVE AT SUCTION TUBE WAS NOT INSTALLED		 - A 18 999 000 54  - -
FLANGE
FOR INJECTION VALVE AT SUCTION TUBE
Replaced by: A  127 078 07 44		 - A 12 707 803 44  - -
021 FLANGE
FOR INJECTION VALVE AT SUCTION TUBE		 003 A 12 707 807 44  - -
WASHER
A 6,4 DIN 9021 FOR INJECTION VALVE AT SUCTION TUBE		 003 - -
LOCK WASHER
B 6 DIN 127 FOR INJECTION VALVE AT SUCTION TUBE		 003 - -
HEX. NUT
M 6 DIN 934-5 S FOR INJECTION VALVE AT SUCTION TUBE		 003 - -
022 OVERFLOW PIPE
FOR INJECTION PUMP		 001 A 19 807 002 32  - -
025 COUPLING SLEEVE
FOR INJECTION PUMP DRIVE		 001 A 62 107 700 16  - $34.95
SNAP RING
32 DIN 9045 FOR INJECTION PUMP DRIVE		 001 - -
027 SEALING FLANGE
FOR INJECTION PUMPE AT CYLINDER CRANKCASE		 002 A 19 907 702 79  - $1.18
028 INSULATING FLANGE
FOR INJECTION PUMPE AT CYLINDER CRANKCASE		 001 A 19 907 702 80  - $38.53
029 MOUNTING SLEEVE
FOR INJECTION PUMPE AT CYLINDER CRANKCASE		 001 A 19 907 700 46  - -
WASHER
8,4 DIN 125 FOR INJECTION PUMPE AT CYLINDER CRANKCASE		 003 - -
HEX.-NUT
M 8 DIN 934-5 S FOR INJECTION PUMPE AT CYLINDER CRANKCASE		 003 - -

MIXTURE CONTROLLER, FLAP-TYPE		 - XXX XXX XXX XXXX - -
030 MIXTURE CONTROLLER, 001 A 00 014 008 53  - -
SEALING RING
WAS NOT INSTALLED		 - A 00 099 771 40  - $6.81
033 CONNECTION NIPPLE 001 A 00 099 730 72  - -
038 LENS-HD.COUNTERSUNK SCREW 002 A 00 007 102 71  - -
039 RADIAL SEALING RING
B 8X16 DIN 6503		 001 - -
040 THROTTLE SHAFT 001 A 00 014 104 11  - -
041 THROTTLE LEVER 001 A 00 014 103 12  - -
BUTTON-HD.GROOVED NAIL
2,6X3 DIN 1476 FOR THROTTLE LEVER AT THROTTLE SHAFT		 001 - -
HEX.-HD. SCREW
M 5X20 DIN 933-8G FOR THROTTLE LEVER AT THROTTLE SHAFT		 001 - -
HEX. NUT
M 5 DIN 934-5 S FOR THROTTLE LEVER AT THROTTLE SHAFT		 001 - -
WASHER
5,3 DIN 125 FOR THROTTLE LEVER AT THROTTLE SHAFT		 002 - -
LOCK WASHER
B 5 DIN 127 FOR THROTTLE LEVER AT THROTTLE SHAFT		 001 - -
047 SHIM 0.1 MM THICK
OPTIONAL		 NB A 00 099 051 40  - -
SHIM 0.5 MM THICK
OPTIONAL		 NB A 00 099 052 40  - -
SHIM 1.0 MM THICK
OPTIONAL		 NB A 00 099 053 40  - -
048 SHIM 0.1 MM THICK
OPTIONAL		 NB A 00 099 025 40  - -
SHIM 0.5 MM THICK
OPTIONAL		 NB A 00 099 036 40  - $3.42
SHIM 1.0 MM THICK
OPTIONAL		 NB A 00 099 037 40  - -
LOCKING RING
8X0,8 DIN 471		 001 - -
050 THROTTLE VALVE 001 A 00 014 101 10  - -
051 LENS-HD.COUNTERSUNK SCREW 002 A 00 007 102 71  - -
055 GASKET 001 A 00 014 100 80  - $11.34
CYLINDRICAL SCREW
AM 5X12 DIN 84-4 S		 002 - -
LOCK WASHER
B 5 DIN 127		 002 - -
THREADED PIN
M 6X20 DIN 551 FOR STOP, THROTTLE LEVER		 001 - -
HEX. NUT
M 6 DIN 934-5 S FOR STOP, THROTTLE LEVER		 001 - -
060 THROTTLE SCREW 001 A 00 099 024 20  - -
061 PRESSURE SPRING 001 A 00 199 320 01  - $6.50
THREADED BUSHING
4 DIN 3871 FOR VACUUM PIPE CONNECTION		 001 - -
SEALING CONE
4 DIN 3862 FOR VACUUM PIPE CONNECTION		 001 - -

Replaced by: A  127 070 02 24		 - A 12 707 000 24  - -
MOUNTING WITH
Replaced by: A  127 070 02 24		 - A 12 707 001 24  - -
080 MOUNTING WITH 001 A 12 707 002 24  - -
BALL PIN
A 8 DIN 71803		 002 - -
SPRING WASHER
B 5 DIN 137		 002 - -
HEX. NUT
M 5 DIN 934-5 S		 001 - -
081 HEX. NUT 001 A 12 799 000 51  - -
082 NEEDLE BEARING 002 A 00 098 124 10  - -
083 O-RING 002 A 00 099 775 45  - -
WASHER
10,5 DIN 125		 001 - -
LOCKING WASHER
8 DIN 6799		 001 - -
WASHER
6,4 DIN 125 FOR MOUNTING AT CRANKCASE		 002 - -
HEX.-HD.SOCKET SCREW
M 6X18 DIN 912-8 G FOR MOUNTING AT CRANKCASE		 002 - -
085 DIRECT-CURRENT MAGNET
FOR INCREASED NUMBER OF REVOLUTION		 001 A 00 007 200 00  - -
086 COLLAR NUT
FOR DIRECT-CURRENT MAGNET, CONNECTING ROD		 001 A 12 799 000 50  - -
HEX. NUT
M 5 DIN 934-5 S FOR DIRECT-CURRENT MAGNET, CONNECTING ROD		 001 - -
088 BRACKET
FOR DIRECT-CURRENT MAGNET		 001 A 12 707 203 40  - -
SPRING WASHER
B 4 DIN 137 FOR MAGNET AT BRACKET		 003 - -
HEX.-HD.SCREW
M 4X8 DIN 933-8 G FOR MAGNET AT BRACKET		 003 - -
HEX.-HD.SCREW
M 6X12 DIN 933-8 G FOR BRACKET, MAGNET AT CYLINDER CRANKCASE		 002 - -
SPRING WASHER
B 6 DIN 137 FOR BRACKET, MAGNET AT CYLINDER CRANKCASE		 002 - -
HEX. NUT
M 6 DIN 934-5 S FOR BRACKET, MAGNET AT CYLINDER CRANKCASE		 002 - -
PRESSURE ROD
Replaced by: A  180 070 02 75		 - A 12 707 004 75  - -
090 PRESSURE ROD 001 A 18 007 002 75  - -
HEX. NUT
M 5 DIN 934-5 S FOR PRESSURE ROD		 001 - -
HEX. NUT
M 5 LINKS DIN 934-5 S FOR PRESSURE ROD		 001 - -
BALL SOCKET
WITH SNAP RING A 8 DIN 71805 FOR PRESSURE ROD
Replaced by: A  000 991 02 20		 - - -
093 BALL SOCKET
WITH SNAP RING FOR PRESSURE ROD		 001 A 00 099 102 20  - -
SNAP RING
R 8 DIN 71805 FOR PRESSURE ROD		 001 - -
BALL SOCKET
WITH SNAP RING LEFT-HAND THREAD A 8 LINKS DIN 71805 FOR PRESSURE ROD
Replaced by: A  000 991 03 22		 - - -
094 BALL SOCKET
WITH SNAP RING LEFT-HAND THREAD FOR PRESSURE ROD		 001 A 00 099 103 22  - -
SNAP RING
R 8 DIN 71805 FOR PRESSURE ROD		 001 - -
095 CONNECTING ROD
FROM MIXTURE CONTROLLER TO CONTROL LEVER		 001 A 12 707 005 75  - -
HEX. NUT
M 5 DIN 934-5 S FROM MIXTURE CONTROLLER TO CONTROL LEVER		 001 - -
HEX. NUT
M 5 LINKS DIN 934-5 S FROM MIXTURE CONTROLLER TO CONTROL LEVER		 001 - -
BALL SOCKET
WITH SNAP RING A 8 DIN 71805 FROM MIXTURE CONTROLLER TO CONTROL LEVER
Replaced by: A  000 991 02 20		 - - -
098 BALL SOCKET
WITH SNAP RING FROM MIXTURE CONTROLLER TO CONTROL LEVER		 001 A 00 099 102 20  - -
SNAP RING
R 8 DIN 71805 FROM MIXTURE CONTROLLER TO CONTROL LEVER		 001 - -
BALL SOCKET
WITH SNAP RING, LEFT-HAND THREAD A 8 LINKS DIN 71805 FROM MIXTURE CONTROLLER TO CONTROL LEVER
Replaced by: A  000 991 03 22		 - - -
099 BALL SOCKET
WITH SNAP RING, LEFT-HAND THREAD FROM MIXTURE CONTROLLER TO CONTROL LEVER		 001 A 00 099 103 22  - -
SNAP RING
R 8 DIN 71805 FROM MIXTURE CONTROLLER TO CONTROL LEVER		 001 - -
100 O RING
FOR MIXTURE CONTROLLER AT SUCTION TUBE		 001 A 00 099 766 45  - $5.74
101 BRACKET
FOR RELEASE SPRING FOR MIXTURE CONTROLLER AT SUCTION TUBE		 001 A 12 707 202 40  - -
WASHER
8,4 DIN 125 FOR MIXTURE CONTROLLER AT SUCTION TUBE		 002 - -
103 HEX. NUT
FOR MIXTURE CONTROLLER AT SUCTION TUBE		 004 A 00 099 008 51  - -
104 RELEASES SPRING 001 A 18 699 335 10  - -

PRESSURE PIPES		 - XXX XXX XXX XXXX - -
PRESSURE PIPE
FROM INJECTION PUMP TO DISTRIBUTOR FITTING
Replaced by: A  127 070 08 33		 - A 12 707 000 33  - -
110 PRESSURE PIPE
FOR INJECTION PUMP TO DISTRIBUTOR 1 FROM INJECTION PUMP TO DISTRIBUTOR FITTING		 001 A 12 707 008 33  - $158.55
PRESSURE PIPE
FROM INJECTION PUMP TO DISTRIBUTOR FITTING
Replaced by: A  127 070 09 33		 - A 12 707 001 33  - -
111 PRESSURE PIPE
FOR INJECTION PUMP TO DISTRIBUTOR 2 FROM INJECTION PUMP TO DISTRIBUTOR FITTING		 001 A 12 707 009 33  - $158.55
112 PRESSURE PIPE
FOR CYLINDER 1 FROM DISTRIBUTOR FITTING TO INJECTION NOZZLE		 001 A 12 707 002 33  - $67.91
113 PRESSURE PIPE
FOR CYLINDER 2 FROM DISTRIBUTOR FITTING TO INJECTION NOZZLE		 001 A 12 707 003 33  - $67.91
114 PRESSURE PIPE
FOR CYLINDER 3 FROM DISTRIBUTOR FITTING TO INJECTION NOZZLE		 001 A 12 707 004 33  - $67.91
115 PRESSURE PIPE
FOR CYLINDER 4 FROM DISTRIBUTOR FITTING TO INJECTION NOZZLE		 001 A 12 707 005 33  - $67.91
116 PRESSURE PIPE
FOR CYLINDER 5 FROM DISTRIBUTOR FITTING TO INJECTION NOZZLE		 001 A 12 707 006 33  - $67.91
117 PRESSURE PIPE
FOR CYLINDER 6 FROM DISTRIBUTOR FITTING TO INJECTION NOZZLE		 001 A 12 707 007 33  - -
120 DAMPER CONTAINER
FOR FUEL FEED		 001 A 12 707 003 68  - -
DAMPER CONTAINER
FOR FUEL RETURN FLOW
Replaced by: A  127 070 04 68		 - A 12 707 000 68  - -
120a DAMPER CONTAINER
FOR FUEL RETURN FLOW		 001 A 12 707 004 68  - -
121 DIAPHRAGM 002 A 12 707 000 52  - $28.33
122 PRESSURE SPRING 002 A 12 799 300 01  - $21.84
123 DAMPER CONTAINER COVER
OPTIONAL		 002 A 12 707 800 91  - -
DAMPER CONTAINER COVER
OPTIONAL		 002 A 12 707 801 91  - -
124 PLUG 002 A 18 630 002 74  - $61.70
SPRING WASHER
B 6 DIN 137 FOR COVER AT CONTAINER		 012 - -
HEX.-HD.SCREW
M 6X18 DIN 933-8 G FOR COVER AT CONTAINER		 012 - -
SCREWED NIPPLE
8 DIN 7627 FOR DAMPER CONTAINER, FUEL FEED		 001 - -
125 SCREWED NIPPLE
FOR DAMPER CONTAINER, FUEL FEED		 001 A 12 799 701 72  - -
SCREWED NIPPLE
6 DIN 7627 FOR DAMPER CONTAINER, FUEL RETURN FLOW
Replaced by: A  127 997 00 72		 - - -
126 SCREWED NIPPLE
FOR DAMPER CONTAINER, FUEL RETURN FLOW		 001 A 12 799 700 72  - -
127 SCREWED NIPPLE
FOR DAMPER CONTAINER, FUEL RETURN FLOW		 001 A 12 799 702 72  - -
REPLACED BY
A 14X18 DIN 7603 A1 A 12X16 DIN 7603 A1		 - - -
SEALING RING
A 14X18 DIN 7603 A1		 004 - -
128 BRACKET
FOR DAMPER CONTAINER, FUEL FEED PIPE AT CYLINDER CRANKCASE		 001 A 12 707 809 41  - -
LOCK WASHER
B 6 DIN 127 FOR BRACKET AT CYLINDER CRANKCASE		 002 - -
HEX.-HD. SOCKET SCREW
M 6X12 DIN 933-8 G FOR BRACKET AT CYLINDER CRANKCASE		 002 - -
129 WASHER
FOR DAMPER CONTAINER FUEL FEED AT BRACKET		 002 A 12 799 001 40  - -
HEX.-HD.SCREW
M 6X22 DIN 933-8 G FOR DAMPER CONTAINER FUEL FEED AT BRACKET UP TO ENGINE 9500085		 002 - -
HEX.-HD.SCREW
M 6X22 DIN 933-8 G FOR DAMPER CONTAINER FUEL FEED AT BRACKET UP TO ENGINE 9500009		 - - -
HEX. NUT
M 6 DIN 934-5 S FOR DAMPER CONTAINER FUEL FEED AT BRACKET FROM ENGINE 9500086		 002 - -
HEX. NUT
M 6 DIN 934-5 S FOR DAMPER CONTAINER FUEL FEED AT BRACKET FROM ENGINE 9500010		 - - -
LOCK WASHER
B 6 DIN 127 FOR DAMPER CONTAINER FUEL FEED AT BRACKET		 002 - -
AUXILIARY AIR PIPE
FROM SUCTION NOISE DAMPER TO INJECTION PUMP UP TO ENGINE 000208		 001 A 12 707 001 81  - -
AUXILIARY AIR PIPE
FROM SUCTION NOISE DAMPER TO INJECTION PUMP UP TO ENGINE 000034		 - A 12 707 001 81  - -
130 AUXILIARY AIR PIPE
FROM SUCTION NOISE DAMPER TO INJECTION PUMP FROM ENGINE 000209		 001 A 12 707 006 81  - -
130 AUXILIARY AIR PIPE
FROM SUCTION NOISE DAMPER TO INJECTION PUMP FROM ENGINE 000035		 - A 12 707 006 81  - -
NOZZLE
UP TO ENGINE 000208		 001 A 00 007 103 38  - -
NOZZLE
UP TO ENGINE 000034		 - A 00 007 103 38  - -
RUBBER HOSE
12X18X60 N 272 ORDER BY THE METER		 001 - -
REPLACED BY
S 18X9 ZY N 288 A WSN 5 N 262		 - - -
REPLACED BY
S 18X9 ZY N 288 A 5X0,35X200 N 263		 - - -
HOSE CLAMP
S 18X9 ZY N 288 A		 002 - -
131 AUXILIARY AIR PIPE
FROM INJECTION PUMP TO SUCTION TUBE		 001 A 12 707 000 81  - -
RUBBER HOSE
12X20X200 N 273 FROM AUXILIARY AIR PIPE TO SUCTION TUBE
Replaced by: A  127 997 04 82		 - - -
132 RUBBER HOSE
ORDER BY THE METER FROM AUXILIARY AIR PIPE TO SUCTION TUBE FROM ENGINE 000035		 - A 12 799 704 82  - -
HOSE CLAMP
ASR 12X9X0,4 N 269 FROM AUXILIARY AIR PIPE TO SUCTION TUBE FROM ENGINE 000035		 - - -
AUXILIARY AIR PIPE
FROM INJECTION PUMP TO SUCTION TUBE UP TO ENGINE 000034		 - A 12 707 004 81  - -
AUXILIARY AIR PIPE
FROM INJECTION PUMP TO SUCTION TUBE FROM ENGINE 000035		 - A 12 707 005 81  - -
FUEL PIPE
WAS NOT INSTALLED		 - A 12 707 000 32  - -
HOLLOW SCREW
A 8 DIN 7623 FOR FUEL PIPE AT FILTER WAS NOT INSTALLED		 - - -
SEALING RING
A 14X18 DIN 7603 A1 FOR FUEL PIPE AT FILTER WAS NOT INSTALLED		 - - -
FUEL PIPE
FROM DAMPER CONTAINER TO INJECTION PUMP, FEED
Replaced by: A  127 070 03 32		 - A 12 707 806 04  - -
133 FUEL PIPE
FROM DAMPER CONTAINER TO INJECTION PUMP, FEED		 001 A 12 707 003 32  - -
136 RETURN FLOW PIPE
FROM INJECTION PUMP TO DAMPER CONTAINER		 001 A 12 707 001 32  - -
PIPE CLAMP HALF
FOR MOUNTING OF PIPES
Replaced by: A  127 078 01 85		 - A 12 707 800 85  - -
137 PIPE CLAMP HALF
FOR MOUNTING OF PIPES		 006 A 12 707 801 85  - -
HEX.-HD.SCREW
M 5X18 DIN 931-8 G FOR MOUNTING OF PIPES		 003 - -
LOCK WASHER
B 5 DIN 127 FOR MOUNTING OF PIPES		 003 - -
HEX. NUT
M 5 DIN 934-5 S FOR MOUNTING OF PIPES		 003 - -
REPLACED BY
127 200 07 40 TOGETHER WITH 1 BRACKET, RUBBER 127 200 05 40 UP TO ENGINE 9500846		 - A 12 720 002 40  - -
REPLACED BY
127 200 07 40 TOGETHER WITH 1 BRACKET, RUBBER 127 200 05 40 UP TO ENGINE 9500009		 - A 12 720 002 40  - -
145 CLAMP WITH RUBBER
FOR MOUNTING WATER, FUEL AND VACUUM PIPES FROM ENGINE 9500847		 001 A 12 720 007 40  - -
145 CLAMP WITH RUBBER
FOR MOUNTING WATER, FUEL AND VACUUM PIPES FROM ENGINE 9500010		 - A 12 720 007 40  - -
REPLACED BY
127 200 05 40 TOGETHER WITH 1 CLAMP WITH RUBBER 127 200 07 40 UP TO ENGINE 9500846		 - A 12 720 003 40  - -
REPLACED BY
127 200 05 40 TOGETHER WITH 1 CLAMP WITH RUBBER 127 200 07 40 UP TO ENGINE 9500009		 - A 12 720 003 40  - -
BRACKET WITH RUBBER
FOR MOUNTING WATER, FUEL AND VACUUM PIPES FROM ENGINE 9500847		 001 A 12 720 005 40  - -
BRACKET WITH RUBBER
FOR MOUNTING WATER, FUEL AND VACUUM PIPES FROM ENGINE 9500010		 - A 12 720 005 40  - -
HEX.-HD. SCREW
M 5X25 DIN 931-8 G FOR BRACKET AT CLAMP UP TO ENGINE 9500846		 001 - -
HEX.-HD. SCREW
M 5X25 DIN 931-8 G FOR BRACKET AT CLAMP UP TO ENGINE 9500009		 - - -
HEX.-HD. SCREW
M 5X25 DIN 931-8 G FOR BRACKET AT CLAMP FROM ENGINE 9500847		 002 - -
HEX.-HD. SCREW
M 5X25 DIN 931-8 G FOR BRACKET AT CLAMP FROM ENGINE 9500010		 - - -
HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR BRACKET AT CLAMP UP TO ENGINE 9500846		 002 - -
HEX.-HD. SCREW
M 5X10 DIN 933-8 G FOR BRACKET AT CLAMP UP TO ENGINE 9500009		 - - -
LOCK WASHER
B 5 DIN 127 FOR BRACKET AT CLAMP UP TO ENGINE 9500846		 003 - -
LOCK WASHER
B 5 DIN 127 FOR BRACKET AT CLAMP UP TO ENGINE 9500009		 - - -
LOCK WASHER
B 5 DIN 127 FOR BRACKET AT CLAMP FROM ENGINE 9500847		 002 - -
LOCK WASHER
B 5 DIN 127 FOR BRACKET AT CLAMP FROM ENGINE 9500010		 - - -
HEX.-HD. SCREW
M 12X1,5X12 DIN 961-8 G FOR BRACKET AT CYLINDER HEAD		 001 - -
SEALING RING
A 12X16 DIN 7603 A1 FOR BRACKET AT CYLINDER HEAD		 001 - -
155 LEAK PIPE
FROM INJECTION PUMP TO CYLINDER CRANKCASE		 001 A 12 707 000 35  - $89.50
HOLLOW SCREW
A 2/3 DIN 7623 FOR LEAK PIPE AT CYLINDER CRANKCASE		 001 - -
SEALING RING
A 8X12 DIN 7603 A1 FOR LEAK PIPE AT CYLINDER CRANKCASE		 002 - -
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.