Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
M 189.980 - ENGINE HOUSING Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
№- | Name | A* | Part number | A | Part number, Price per Unit., $ |
ENGINE |
- | XXX XXX XXX XXXX | - | - | |
ENGINE, COMPLETE WITHOUT STARTER MOTOR |
- | A 18 901 000 00 | - | - | |
ENGINE, COMPLETE WITHOUT STARTER MOTOR SPECIAL REQUEST FOR CARS WITH "ZF.-HYDRO" STEERING |
- | A 18 901 006 00 | - | - | |
ENGINE, COMPLETE WITHOUT STARTER MOTOR, CLUTCH AND TRANSMISSION |
- | A 18 901 002 00 | - | - | |
ENGINE, COMPLETE WITHOUT STARTER MOTOR, CLUTCH AND TRANSMISSION |
- | A 18 901 008 00 | - | - | |
ENGINE, COMPLETE WITHOUT STARTER MOTOR, CLUTCH AND TRANSMISSION |
- | A 18 901 013 00 | - | - | |
ENGINE, COMPLETE WITHOUT STARTER MOTOR, CLUTCH AND TRANSMISSION SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
- | A 18 901 009 00 | - | - | |
ENGINE, COMPLETE WITHOUT STARTER MOTOR, CLUTCH AND TRANSMISSION SPECIAL REQUEST FOR AIR CONDITIONING SYSTEM |
- | A 18 901 010 00 | - | - | |
CYLINDER CRANKCASE |
- | XXX XXX XXX XXXX | - | - | |
REPLACED BY 180 010 07 08 TOGETHER WITH 1 WASHER 13 DIN 433 1 HEX.-HD. SCREW M 12X1, 5X30 DIN 960-10 K UP TO ENGINE 8500939 |
- | A 18 901 006 08 | - | - | |
REPLACED BY 180 010 07 08 TOGETHER WITH 1 WASHER 13 DIN 433 1 HEX.-HD. SCREW M 12X1, 5X30 DIN 960-10 K UP TO ENGINE 8500329 |
- | A 18 901 006 08 | - | - | |
001 | CYLINDER CRANKCASE UP TO ENGINE 8500939, MODEL 980 UP TO ENGINE 8500329, MODEL 981 DRILL HOLE IN GENERATOR SUPPORT TO A DIA. OF 13-MM FROM |
- | A 18 901 007 08 | - | - |
001 | CYLINDER CRANKCASE UP TO ENGINE 8500939, MODEL 980 UP TO ENGINE 8500329, MODEL 981 DRILL HOLE IN GENERATOR SUPPORT TO A DIA. OF 13-MM FROM |
- | A 18 901 007 08 | - | - |
003 | LOCKING PLATE FOR CORE HOLE, LATERAL, IN CYLINDER CRANKCASE |
002 | B 30 N 59 0N59a | - | - |
005 | CYLINDR. PIN FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE |
001 | A 18 699 107 01 | - | - |
LOCKING PIN FOR OIL SEALING OF CRANKSHAFT |
002 | A 18 699 100 55 | - | $6.32 | |
006 | SCREW PLUG WITH INTERNAL HEXAGON FOR LOCKING OIL DUCT, FRONT AND REAR |
001 | A 13 699 700 06 | - | - |
007 | SCREW PLUG WITH INTERNAL HEXAGON FOR LOCKING OIL DUCT, FRONT AND REAR |
002 | A 00 099 706 32 | - | $18.76 |
008 | SLOTTED PLUG FOR LOCKING OIL DUCT, FRONT AND REAR |
001 | A 18 699 701 03 | - | - |
009 | SEALING RING A 14X18 DIN 7603 CU |
001 | - | - | |
010 | SCREW PLUG WITH ADJUSTMENT INDICATOR |
001 | A 18 603 201 15 | - | - |
011 | SCREW PLUG M 12X1, 5 DIN 906-4S FOR LOCKING OIL BORE, BOTTOM |
001 | - | - | |
012 | DOWEL PIN 8 H8X14 DIN 7 FOR DRIVE HOUSING AT CYLINDER CRANKCASE |
002 | - | - | |
013 | PIN FOR FAN SUPPORT AT CYLINDER CRANKCASE |
001 | A 18 820 501 74 | - | - |
014 | STUD BOLT M 8X28 DIN 939-5 S FOR FAN SUPPORT AT CYLINDER CRANKCASE |
002 | - | - | |
015 | CRANKSHAFT BEARING CAP FOR 1ST, 2ND, 3RD, 5TH, 6TH AND 7TH CRANKSHAFT BEARING |
006 | A 18 001 100 11 | - | - |
016 | CRANKSHAFT BEARING CAP WITH DOWEL PIN FOR 4TH CRANKSHAFT BEARING, LAPPED BEARING |
001 | A 18 001 001 23 | - | - |
017 | TIGHTENING PIN | 004 | A 12 199 100 41 | - | - |
018 | GUARD PLATE HALF, 2-MM THICK, STANDARD FOR 4TH CRANKSHAFT BEARING CAP |
002 | A 18 601 100 52 | - | $70.03 |
GUARD PLATE HALF, 2.05-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 101 52 | - | $70.03 | |
GUARD PLATE HALF, 2.10-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 102 52 | - | $70.03 | |
GUARD PLATE HALF, 2.15-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 107 52 | - | $70.03 | |
GUARD PLATE HALF, 2.20-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 103 52 | - | $70.03 | |
GUARD PLATE HALF, 2.25-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 108 52 | - | $70.03 | |
GUARD PLATE HALF, 2.30-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 104 52 | - | $70.03 | |
GUARD PLATE HALF, 2.35-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 109 52 | - | $70.03 | |
GUARD PLATE HALF, 2.40-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 105 52 | - | $70.03 | |
GUARD PLATE HALF, 2.50-MM THICK FOR 4TH CRANKSHAFT BEARING CAP REPAIR DESIGN |
002 | A 18 601 106 52 | - | $70.03 | |
019 | CYLINDR. PIN 10 M6X16 DIN 7 FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
007 | - | - | |
020 | CYLINDR. PIN 8 M6X16 DIN 7 FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
007 | - | - | |
021 | BRACKET FOR SUCTION PIPE, OIL PUMP FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
001 | A 18 618 605 40 | - | - |
022 | HEX.-HD. SCREW M 12X75 DIN 931-10 K FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
014 | - | - | |
023 | SPRING WASHER B 12 DIN 137 FOR CRANKSHAFT BEARING CAP AT CYLINDER CRANKCASE |
012 | - | - | |
CYLINDER COVER WITH NIPPLE AT STARTER SIDE UP TO ENGINE 8500939 |
- | A 19 901 000 10 | - | - | |
CYLINDER COVER WITH NIPPLE AT STARTER SIDE UP TO ENGINE 8500329 |
- | A 19 901 000 10 | - | - | |
025 | CYLINDER COVER WITH NIPPLE AT STARTER SIDE FROM ENGINE 8500940 |
- | A 18 901 000 10 | - | - |
025 | CYLINDER COVER WITH NIPPLE AT STARTER SIDE FROM ENGINE 8500330 |
- | A 18 901 000 10 | - | - |
GASKET FOR CYLINDER COVER (STARTER SIDE) AT CYLINDER CRANKCASE UP TO ENGINE 8500939 |
- | A 19 901 500 21 | - | - | |
GASKET FOR CYLINDER COVER (STARTER SIDE) AT CYLINDER CRANKCASE UP TO ENGINE 8500329 |
- | A 19 901 500 21 | - | - | |
026 | GASKET FOR CYLINDER COVER (STARTER SIDE) AT CYLINDER CRANKCASE FROM ENGINE 8500940 |
- | A 19 801 500 21 | - | - |
026 | GASKET FOR CYLINDER COVER (STARTER SIDE) AT CYLINDER CRANKCASE FROM ENGINE 8500330 |
- | A 19 801 500 21 | - | - |
027 | HEX.-HD. SOCKET SCREW M 6X12 DIN 912-6 G FOR CYLINDER COVER (STARTER SIDE) AT CYLINDER CRANKCASE |
032 | - | - | |
HEX.-HD. SOCKET SCREW M 6X15 DIN 912-6 G FOR CYLINDER COVER (STARTER SIDE) AT CYLINDER CRANKCASE |
002 | - | - | ||
028 | WASHER FOR CYLINDER COVER (STARTER SIDE) AT CYLINDER CRANKCASE |
034 | A 18 099 010 40 | - | - |
28a | BRACKET FOR COOLING WATER PIPE |
001 | A 19 920 002 40 | - | - |
GASKET A 10X14 DIN 7603 A1 FROM ENGINE 8500940 |
- | - | - | ||
GASKET A 10X14 DIN 7603 A1 FROM ENGINE 8500330 |
- | - | - | ||
HEX.-HD. SCREW M 10X15 DIN 933-8 G FROM ENGINE 8500940 |
- | - | - | ||
HEX.-HD. SCREW M 10X15 DIN 933-8 G FROM ENGINE 8500330 |
- | - | - | ||
029 | CYLINDER COVER WITH OIL COOLER COIL AT SPARK PLUG SIDE |
001 | A 18 601 010 10 | - | $1.19 |
030 | GASKET | 001 | A 18 601 503 21 | - | - |
031 | WASHER | 002 | A 13 699 016 40 | - | - |
032 | FIXING ANGLE FOR BRACKET, INTAKE NOISE DAMPER |
001 | A 18 909 401 46 | - | - |
033 | FIXING ANGLE FOR BRACKET, INTAKE NOISE DAMPER |
001 | A 18 909 400 46 | - | - |
034 | FIXING PICCE FOR BRACKET FOR WATER PIPE FROM TRANSMISSION OIL COOLER TO WATER PUMP AT OIL COOLER SIDE |
001 | A 18 909 401 44 | - | - |
035 | BRACKET FOR COOLING WATER PIPE |
001 | A 18 920 000 40 | - | $22.66 |
036 | BRACKET FOR COOLING WATER PIPE |
001 | A 18 920 001 40 | - | - |
037 | HEX.-HD. SOCKET SCREW M 6X12 DIN 912-6 G FOR CYLINDER COVER AT CYLINDER CRANKCASE (PLUG SIDE) |
017 | - | - | |
038 | HEX.-HD. SOCKET SCREW M 6X22 DIN 912-6 G FOR CYLINDER COVER AT CYLINDER CRANKCASE (PLUG SIDE) |
002 | - | - | |
039 | HEX.-HD. SOCKET SCREW M 6X15 DIN 912-6 G FOR CYLINDER COVER AT CYLINDER CRANKCASE (PLUG SIDE) |
005 | - | - | |
040 | WASHER FOR CYLINDER COVER AT CYLINDER CRANKCASE (PLUG SIDE) |
015 | A 18 099 010 40 | - | - |
COVER FOR INTERMEDIATE GEAR, TIMING DRIVE Replaced by: A 189 011 01 33 |
- | A 18 901 100 33 | - | - | |
041 | COVER FOR INTERMEDIATE GEAR, TIMING DRIVE |
001 | A 18 901 101 33 | - | - |
GASKET FOR COVER AT CYLINDER CRANKCASE Replaced by: A 189 011 00 80 |
- | A 18 601 100 80 | - | - | |
042 | GASKET FOR COVER AT CYLINDER CRANKCASE |
001 | A 18 901 100 80 | - | $4.89 |
043 | HEX.-HD. SOCKET SCREW M 6X12 DIN 912-6 G FOR COVER AT CYLINDER CRANKCASE |
004 | - | - | |
BEARING BUSHING FOR INTERMEDIATE GEAR SHAFT, REAR SEE ALSO GROUP 05 |
001 | A 18 005 210 06 | - | - | |
BEARING FOR IGNITION DISTRIBUTOR DRIVE SEE ALSO GROUP 15 |
001 | A 18 615 003 14 | - | $321.93 | |
044 | BRACKET FOR TRANSMISSION AT OIL COOLER |
002 | A 18 618 000 40 | - | - |
045 | SCREWED FITTING 16 DIN 7627 FOR OIL PIPE CONNECTION, COOLER AT CYLINDER CRANKCASE |
001 | - | - | |
046 | SEALING RING D 22X27 DIN 7603 A1 FOR OIL PIPE CONNECTION, COOLER AT CYLINDER CRANKCASE |
001 | - | - | |
047 | SCREWED FITTING FOR OIL PRESSURE GAUGE PIPE CONNECTION AT CYLINDER CRANKCASE |
001 | A 18 199 001 68 | - | $10.04 |
048 | SEALING RING A 10X14 DIN 7603 A1 FOR OIL PRESSURE GAUGE PIPE CONNECTION AT CYLINDER CRANKCASE |
001 | - | - | |
INTERMEDIATE PLATE, 6-MM THICK WITHOUT COLLAR PIN BETWEEN CYLINDER CRANKCASE AND TRANSMISSION Replaced by: A 189 011 00 05 |
- | A 18 601 104 05 | - | - | |
051 | INTERMEDIATE PLATE, 6-MM THICK WITHOUT COLLAR PIN BETWEEN CYLINDER CRANKCASE AND TRANSMISSION |
001 | A 18 901 100 05 | - | - |
052 | HEX.-HD. SCREW M 10X15 DIN 933-8 G FOR INTERMEDIATE PLATE AT CYLINDER CRANKCASE |
002 | - | - | |
OIL PAN AND OIL DIPSTICK |
- | XXX XXX XXX XXXX | - | - | |
055 | OIL PAN, FRONT PART, WITH THREADED BUSHING |
001 | A 18 601 010 13 | - | - |
GUIDE TUBE IN OIL PAN FOR OIL DIPSTICK UP TO ENGINE 9500231 |
- | A 19 901 000 66 | - | - | |
GUIDE TUBE IN OIL PAN FOR OIL DIPSTICK UP TO ENGINE 9500086 |
- | A 19 901 000 66 | - | - | |
056 | GUIDE TUBE FOR OIL-DIPSTICK FROM ENGINE 9500232 |
- | A 18 901 000 66 | - | - |
056 | GUIDE TUBE FOR OIL-DIPSTICK FROM ENGINE 9500087 |
- | A 18 901 000 66 | - | - |
56a | ELBOW FITTING FOR GUIDE TUBE, OIL DIPSTICK AT CYLINDER CRANKCASE FROM ENGINE 9500232 |
- | A 62 101 801 28 | - | $3.72 |
56a | ELBOW FITTING FOR GUIDE TUBE, OIL DIPSTICK AT CYLINDER CRANKCASE FROM ENGINE 9500087 |
- | A 62 101 801 28 | - | $3.72 |
56b | SEALING RING FOR ELBOW FITTING AND GUIDE TUBE, OIL DIPSTICK AT CYLINDER CRANKCASE FROM ENGINE 9500232 |
- | A 62 199 701 40 | - | $5.25 |
56b | SEALING RING FOR ELBOW FITTING AND GUIDE TUBE, OIL DIPSTICK AT CYLINDER CRANKCASE FROM ENGINE 9500087 |
- | A 62 199 701 40 | - | $5.25 |
SPRING WASHER B 6 DIN 137 FOR GUIDE TUBE AT BRACKET, COOLING WATER PIPE FROM ENGINE 9500232 |
- | - | - | ||
SPRING WASHER B 6 DIN 137 FOR GUIDE TUBE AT BRACKET, COOLING WATER PIPE FROM ENGINE 9500087 |
- | - | - | ||
HEX.-HD. SCREW M 6X10 DIN 933-8 G FOR GUIDE TUBE AT BRACKET, COOLING WATER PIPE FROM ENGINE 9500232 |
- | - | - | ||
HEX.-HD. SCREW M 6X10 DIN 933-8 G FOR GUIDE TUBE AT BRACKET, COOLING WATER PIPE FROM ENGINE 9500087 |
- | - | - | ||
OIL DIPSTICK WITH BREATHER FILTER UP TO ENGINE 9500231 |
- | A 18 901 000 72 | - | - | |
OIL DIPSTICK WITH BREATHER FILTER UP TO ENGINE 9500086 |
- | A 18 901 000 72 | - | - | |
057 | OIL DIPSTICK WITH BREATHER FILTER FROM ENGINE 9500232 |
- | A 18 901 002 72 | - | - |
057 | OIL DIPSTICK WITH BREATHER FILTER FROM ENGINE 9500087 |
- | A 18 901 002 72 | - | - |
058 | SEALING RING FOR OIL DIPSTICK |
001 | A 19 899 700 40 | - | $0.86 |
059 | SEALING RING C 26X32 DIN 7603 CU-ASB. FOR OIL OUTLET AT OIL PAN, FRONT PART |
001 | - | - | |
060 | SCREW PLUG FOR OIL OUTLET AT OIL PAN, FRONT PART |
001 | A 13 699 712 30 | - | - |
061 | GASKET FOR OIL PAN, FRONT PART AT CYLINDER CRANKCASE |
001 | A 18 601 401 80 | - | $13.42 |
062 | WASHER 8,4 DIN 433 FOR OIL PAN, FRONT PART AT CYLINDER CRANKCASE |
024 | - | - | |
063 | HEX.-HD. SOCKET SCREW M 8X20 DIN 912-8 G FOR OIL PAN, FRONT PART AT CYLINDER CRANKCASE |
022 | - | - | |
064 | HEX.-HD. SOCKET SCREW M 8X60 DIN 912-8 G FOR OIL PAN, FRONT PART AT CYLINDER CRANKCASE |
002 | - | - | |
065 | OIL PAN, REAR PART | 001 | A 18 601 012 13 | - | - |
LOCKING PIN | 004 | A 18 699 100 55 | - | $6.32 | |
066 | WASHER 8,4 DIN 433 FOR OIL PAN, REAR PART, AT CYLINDER CRANKCASE |
006 | - | - | |
067 | HEX.-HD. SOCKET SCREW M 8X70 DIN 912-8 G FOR OIL PAN, REAR PART, AT CYLINDER CRANKCASE |
004 | - | - | |
068 | HEX.-HD. SOCKET SCREW M 8X35 DIN 912-8 G FOR OIL PAN, REAR PART, AT CYLINDER CRANKCASE |
002 | - | - |
- To find out where to buy the item or equivalent, click on the part number.