Geri Dön

M 189.980 - INJECTION PUMP Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv

№- Name A* Part number A Part number, Price per Unit., $

INJECTION PUMP		 - XXX XXX XXX XXXX - -
001 INJECTION PUMP
WITH GOVERNOR AND FEED PUMP DISPLACE SCREWED NIPPLE FOR FUEL PIPE CONNECTION FROM FILTER; UP TO ENGINE 8500282 (MODEL 98		 001 A 00 207 416 01  - -
INJECTION PUMP
WITH GOVERNOR AND FEED PUMP		 001 A 00 207 482 01  - -
002 TAPPET SPRING 006 A 00 099 364 01  - -
003 PIPE CONNECTION 006 A 00 007 800 68  - -
004 CLAMPING JAW WITH THREAD
TO CLAMP PIPE CONNECTIONS		 003 A 00 007 805 35  - -
005 CLAMPING JAW
WITH THROUGH HOLE TO CLAMP PIPE CONNECTIONS		 003 A 00 007 804 35  - -
006 CYLINDR. SCREW
BM 5X25 DIN 84-4 S TO CLAMP PIPE CONNECTIONS		 003 - -
007 WASHER
5,3 DIN 433 TO CLAMP PIPE CONNECTIONS		 003 - -
008 LOCK WASHER
B 5 DIN 127 TO CLAMP PIPE CONNECTIONS		 003 - -
009 OVERFLOW VALVE 001 A 00 007 401 84  - $235.07
010 HELICAL SPRING 001 A 00 009 117 15  - -
011 NONRETURN VALVE 001 A 00 007 402 84  - -
012 HELICAL SPRING 001 A 00 009 118 15  - -
013 DIAPHRAGM
FOR GOVERNOR		 001 A 00 007 509 07  - -
014 SUPPORTING RING
FOR DIAPHRAGM		 001 A 00 007 500 44  - -
015 FUEL FEED PUMP 001 A 00 009 170 01  - -
016 SCREW PLUG 001 A 00 009 104 56  - -
017 SEALING RING
A 28X34 DIN 7603 FIB.		 001 - -
018 ADJUSTMENT PLATE,
0.3-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT		 NB A 00 007 408 45  - -
ADJUSTMENT PLATE,
0.5-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT		 NB A 00 007 409 45  - -
ADJUSTMENT PLATE,
0.7-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT		 NB A 00 007 410 45  - -
ADJUSTMENT PLATE,
0.9-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT		 NB A 00 007 411 45  - -
ADJUSTMENT PLATE,
1.1-MM THICK OPTIONAL BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT		 NB A 00 007 412 45  - -
019 INTERMEDIATE FLANGE
BETWEEN FUEL FEED PUMP AND INJECTION PUMP (FOR FUEL FEED PUMP ADJUSTMENT		 001 A 00 009 100 45  - $69.21
020 OIL DIPSTICK 001 A 00 007 412 60  - -
021 AIR FILTER
ON GOVERNOR		 001 A 00 007 500 32  - $39.86
022 SEALING RING
A 12X16 DIN 7603 CU. ON GOVERNOR		 001 - -
023 THERMOSTAT 001 A 00 020 377 75  - -
THERMOSTAT HOUSING
Replaced by: A  000 203 01 73		 - A 00 020 300 73  - -
024 THERMOSTAT HOUSING 001 A 00 020 301 73  - -
025 SEALING RING
A 20X24 DIN 7603 CU		 001 - -
026 LOCK WASHER
B 6 DIN 127 FOR THERMOSTAT AT GOVERNOR		 002 - -
027 CYLINDR. SCREW
BM 6X25 DIN 84-4 S FOR THERMOSTAT AT GOVERNOR		 002 - -
030 SOLENOID 001 A 00 007 400 88  - -
031 GASKET 001 A 00 007 403 80  - -
032 LOCK WASHER
B 6 DIN 127 FOR SOLENOID AT GOVERNOR		 002 - -
033 HEX.-HD. SCREW
M 6X18 DIN 933-8 G FOR SOLENOID AT GOVERNOR		 002 - -
040 FOLLOWER
FOR INJECTION PUMP		 001 A 19 907 700 09  - -
041 COUPLING SLEEVE 001 A 18 907 002 91  - -
042 SNAP RING
28 DIN 9045		 001 - -
043 WOODRUFF KEY
3X6,5 DIN 6888 FOR FOLLOWER AT INJECTION PUMP		 001 - -
044 LOCK WASHER
B 12 DIN 127 FOR FOLLOWER AT INJECTION PUMP		 001 - -
045 HEX. NUT
M 12 DIN 936-5 S FOR FOLLOWER AT INJECTION PUMP		 001 - -
046 SEALING FLANGE
FOR INJECTION PUMP AT DRIVE CASE		 002 A 19 907 702 79  - $1.18
047 INSULATING FLANGE
FOR INJECTION PUMP AT DRIVE CASE		 001 A 19 907 702 80  - $38.53
048 WASHER
8,4 DIN 125 FOR INJECTION PUMP AT DRIVE CASE		 003 - -
049 LOCK WASHER
B 8 DIN 127 FOR INJECTION PUMP AT DRIVE CASE		 003 - -
050 HEX. NUT
M 8 DIN 934-5 S FOR INJECTION PUMP AT DRIVE CASE		 003 - -
INJECTION VALVE
IN SUCTION PIPE
Replaced by: A  000 078 00 23		 - A 00 007 800 22  - -
055 INJECTION VALVE
IN SUCTION PIPE		 006 A 00 007 800 23  - -
55a WASHER
FOR INJECTION VALVE AT SUCTION PIPE		 006 A 18 999 003 40  - -
056 BOX NUT
FOR INJECTION VALVE AT SUCTION PIPE		 006 A 18 999 000 54  - -
057 OVERFLOW TUBE
FOR INJECTION PUMP		 001 A 19 807 002 32  - -
OIL PIPE
FROM OIL PRESSURE RELIEF VALVE, INJECTION PUMP TO FUEL FEED PUMP
Replaced by: A  198 180 00 27		 - A 19 918 000 27  - -
058 OIL PIPE
FROM OIL PRESSURE RELIEF VALVE, INJECTION PUMP TO FUEL FEED PUMP		 001 A 19 818 000 27  - $42.36

MIXTURE CONTROLLER, FLAP-TYPE		 - XXX XXX XXX XXXX - -
070 MIXTURE CONTROLLER, 001 A 00 014 006 53  - -
071 THROTTLE SHAFT 001 A 00 014 102 11  - -
072 THROTTLE VALVE 001 A 00 014 101 10  - -
073 BUTTON-HEAD SCREW
AM 4X8 DIN 86-4 S		 002 - -
074 LOCK WASHER
B 4 DIN 127		 002 - -
075 SEALING RING 002 A 00 099 771 40  - $6.81
076 RADIAL SEALING RING
A 8X16 DIN 6503 TO SEAL THROTTLE SHAFT		 002 - -
077 SHIM, 0.1 MM THICK
OPTIONAL		 NB A 00 099 025 40  - -
SHIM, 0.5 MM THICK
OPTIONAL		 NB A 00 099 036 40  - $3.42
SHIM, 1.0 MM THICK
OPTIONAL		 NB A 00 099 037 40  - -
078 WASHER
BETWEEN LEVER AND HOUSING		 001 A 00 099 038 40  - -
079 THROTTLE LEVER
ON THROTTLE SHAFT		 001 A 00 014 101 12  - -
080 HEX.-HD. SCREW
M 5 X 22 SZ DIN 931-8 G		 001 - -
081 LOCK WASHER
B 5 DIN 127		 001 - -
082 HEX. NUT
M 5 DIN 934-5 S		 001 - -
085 LEVER 001 A 00 014 102 12  - -
086 HEX.-HD. SCREW
M 5 X 22 SZ DIN 931-8 G		 001 - -
087 LOCK WASHER
B 5 DIN 127		 001 - -
088 HEX. NUT
M 5 DIN 934-5 S		 001 - -
089 ADJUSTING SCREW
FOR IDLING ADJUSTMENT		 001 A 00 099 023 20  - -
090 HELICAL SPRING
FOR IDLING ADJUSTMENT		 001 A 00 099 363 01  - -
091 VALVE 001 A 00 014 102 58  - -
092 SEALING RING
FOR VALVE		 001 A 00 099 774 40  - $3.70
093 PROTECTIVE CAP
WITH HELICAL SPRING FOR VALVE		 001 A 00 014 100 40  - -
094 SPRING SEAT 001 A 00 014 101 43  - -
095 NUT M 8X1 001 A 00 099 050 51  - -
096 HOLLOW SCREW
A 6 DIN 7623-6 S FOR VACUUM LINE CONNECTION		 001 - -
097 SEALING RING
A 12X16 DIN 7603 A1		 002 - -
098 AIR NOZZLE M 8
IN BORE-HOLE FOR HOLLOW SCREW		 001 A 00 014 101 23  - -
099 AIR NOZZLE
M 6 IN THE SIZES - IDLING NOZZLE		 001 - -
099 AIR NOZZLE
M 6 IN THE SIZES 100 IDLING NOZZLE AS REQUIRED		 - A 00 007 113 34  - $5.26
099 AIR NOZZLE
M 6 IN THE SIZES 120 IDLING NOZZLE AS REQUIRED		 - A 00 007 115 34  - -
099 AIR NOZZLE
M 6 IN THE SIZES 140 IDLING NOZZLE AS REQUIRED		 - A 00 007 102 34  - $5.26
099 AIR NOZZLE
M 6 IN THE SIZES 160 IDLING NOZZLE AS REQUIRED		 - A 00 007 103 34  - -
099 AIR NOZZLE
M 6 IN THE SIZES 180 IDLING NOZZLE AS REQUIRED		 - A 00 007 118 34  - -
099 AIR NOZZLE
M 6 IN THE SIZES 200 IDLING NOZZLE AS REQUIRED		 - A 00 007 101 34  - -
099 AIR NOZZLE
M 6 IN THE SIZES 220 IDLING NOZZLE AS REQUIRED		 - A 00 007 105 34  - $5.98
099 AIR NOZZLE
M 6 IN THE SIZES 240 IDLING NOZZLE AS REQUIRED		 - A 00 007 121 34  - -
099 AIR NOZZLE
M 6 IN THE SIZES 260 IDLING NOZZLE AS REQUIRED		 - A 00 007 123 34  - -
100 AIR NOZZLE
M 6 IN THE SIZES - THROTTLING-TYPE NOZZLE		 001 - -
100 AIR NOZZLE
M 6 IN THE SIZES 180 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 118 34  - -
100 AIR NOZZLE
M 6 IN THE SIZES 190 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 104 34  - -
100 AIR NOZZLE
M 6 IN THE SIZES 200 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 101 34  - -
100 AIR NOZZLE
M 6 IN THE SIZES 210 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 119 34  - $18.27
100 AIR NOZZLE
M 6 IN THE SIZES 220 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 105 34  - $5.98
100 AIR NOZZLE
M 6 IN THE SIZES 230 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 120 34  - -
100 AIR NOZZLE
M 6 IN THE SIZES 240 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 121 34  - -
100 AIR NOZZLE
M 6 IN THE SIZES 250 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 122 34  - $6.13
100 AIR NOZZLE
M 6 IN THE SIZES 260 THROTTLING-TYPE NOZZLE AS REQUIRED		 - A 00 007 123 34  - -
101 SCREW PLUG M 10X1
FOR IDLING NOZZLE AND THROTTLING-TYPE NOZZLE		 002 A 00 099 020 20  - -
102 SEALING RING
A 10X14 DIN 7603 CU		 002 - -
MAGNET
FOR SLOW-RUNNING CUTOUT VALVE
Replaced by: A  000 141 01 88		 - A 00 014 100 88  - -
105 MAGNET
FOR SLOW-RUNNING CUTOUT VALVE		 001 A 00 014 101 88  - -
106 LOCK WASHER
B 5 DIN 127 FOR MAGNET AT FLAP-TYPE, MIXTURE CONTROLLER		 004 - -
107 CYLINDR. SCREW
M 5X18 DIN 84 -4 S FOR MAGNET AT FLAP-TYPE, MIXTURE CONTROLLER		 004 - -
108 THREADED NIPPLE
10 DIN 7627 FOR CONNECTION, ADDITIONAL AIR LINE		 001 - -
109 SEALING RING
A 16X20 DIN 7603 CU FOR CONNECTION, ADDITIONAL AIR LINE		 001 - -
120 GASKET
FOR FLAP TYPE, MIXTURE CONTROLLER AT SUCTION PIPE		 001 A 19 914 100 80  - -
121 WASHER
8,4 DIN 125 FOR FLAP TYPE, MIXTURE CONTROLLER AT SUCTION PIPE		 004 - -
122 HEX. NUT
M 8 DIN 934-5 S FOR FLAP TYPE, MIXTURE CONTROLLER AT SUCTION PIPE		 004 - -
SWITCH
FOR ANTI-CREEP DEVICE UP TO ENGINE 9500318		 - A 00 054 500 66  - -
123 SWITCH
FOR ANTI-CREEP DEVICE FROM ENGINE 9500319		 - A 00 054 501 66  - -
123a HEX.-HD. SCREW
FOR IDLING ADJUSTMENT FROM ENGINE 9500119		 - A 18 999 000 01  - -
HEX. NUT
M 5 DIN 934-5 S FOR SWITCH AT FLAP-TYPE, MIXTURE CONTROLLER UP TO ENGINE 9500318		 - - -
124 HEX. NUT 1/4" - 28
FOR SWITCH AT FLAP-TYPE, MIXTURE CONTROLLER FROM ENGINE 9500319		 - A 18 999 002 51  - -
125 TEMPERATURE SWITCH
IN COOLING WATER DISCHARGE NIPPLE		 001 A 00 054 570 24  - -
126 SEALING RING
D 14X18 DIN 7603 A1 TEMPERATURE SWITCH		 001 - -
REPLACED BY
189 070 08 15 TOGETHER WITH 1 HEX.-HD. SOCKET SCREW M 8X100 DIN 912-8 G UP TO ENGINE 8500255		 - A 18 907 005 15  - -
REPLACED BY
189 070 08 15 TOGETHER WITH 1 HEX.-HD. SOCKET SCREW M 8X100 DIN 912-8 G UP TO ENGINE 8500049		 - A 18 907 005 15  - -
130 DRIVE HOUSING
WITH STUD BOLT FROM ENGINE 8500256		 - A 18 907 008 15  - -
130 DRIVE HOUSING
WITH STUD BOLT FROM ENGINE 8500050		 - A 18 907 008 15  - -
131 STUD BOLT
M 8X38 DIN 835-5 S		 003 - -
132 BEARING SLEEVE 001 A 19 907 700 46  - -
133 DRIVE SHAFT
FOR INJECTION PUMP		 001 A 18 907 701 05  - -
134 GROOVED BEARING
6202 DIN 625		 002 - -
135 CIRCLIP
35X1,5 DIN 472		 002 - -
136 WOODRUFF KEY
3X5 DIN 6888		 001 - -
137 SPROCKET WHEEL
FOR INJECTION PUMP		 001 A 18 907 700 12  - -
138 SINGLE ROLLER CHAIN 001 A 19 907 700 19  - $11.66
139 BUSHING 001 A 18 907 700 50  - -
140 LOCK WASHER
B 10 DIN 127		 001 - -
141 HEX. NUT
M 10X1 DIN 936-5 S		 001 - -
142 GASKET 001 A 18 907 700 80  - $10.14
143 COVER 001 A 18 907 700 02  - -
144 HEX.-HD. SOCKET SCREW
M 6X12 DIN 912-6 G		 004 - -
145 SPRING WASHER
B 6 DIN 137		 004 - -
146 SLOTTED PLUG
M 16X1,5 SK 6 DIN 71022-4 S UP TO ENGINE 8500282		 - - -
146 SLOTTED PLUG
M 16X1,5 SK 6 DIN 71022-4 S UP TO ENGINE 8500065		 - - -
150 GASKET
FOR DRIVE HOUSING AT CYLINDER CRANKCASE		 001 A 19 918 100 80  - -
151 WASHER
8,4 DIN 433 FOR DRIVE HOUSING AT CYLINDER CRANKCASE		 004 - -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE UP TO ENGINE 8500255		 - - -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE UP TO ENGINE 8500049		 - - -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500256		 - - -
HEX.-HD. SOCKET SCREW
M 8X60 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500050		 - - -
152 HEX.-HD. SOCKET SCREW
M 8X100 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500256		 - - -
152 HEX.-HD. SOCKET SCREW
M 8X100 DIN 912-8 G FOR DRIVE HOUSING AT CYLINDER CRANKCASE FROM ENGINE 8500050		 - - -
THREADED PIN
M 8X10 DIN 551-5 S FOR LOCKING CONTROL BORE IN DRIVE HOUSING FROM ENGINE 8500283		 - - -
THREADED PIN
M 8X10 DIN 551-5 S FOR LOCKING CONTROL BORE IN DRIVE HOUSING FROM ENGINE 8500066		 - - -
153 DOUBLE LEVER
FOR CONTROL		 001 A 18 907 001 22  - -
ECCENTRIC SCREW
FOR DOUBLE LEVER STOP
Replaced by: A  180 072 02 71		 - A 18 907 500 71  - -
154 ECCENTRIC SCREW
FOR DOUBLE LEVER STOP		 001 A 18 007 202 71  - -
155 HEX. NUT
M 8 DIN 934-5 S FOR DOUBLE LEVER STOP		 001 - -
156 WASHER
10,5 DIN 433 FOR DOUBLE LEVER AT SUCTION PIPE		 001 - -
157 COTTER PIN
2X18 DIN 94 FOR DOUBLE LEVER AT SUCTION PIPE		 001 - -
158 SPRING WASHER
A 10 DIN 137 FOR DOUBLE LEVER AT SUCTION PIPE		 001 - -
159 PUSH ROD
FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE		 001 A 18 907 000 76  - -
160 PUSH ROD
5X150X25/25 N 331 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE		 001 - -
161 HEX. NUT
M 5 DIN 934-5 S FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE		 003 - -
BALL SOCKET
WITH SNAP RING A 8 DIN 71805 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE
Replaced by: A  000 991 02 20		 - - -
162 BALL SOCKET
WITH SNAP RING FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE		 001 A 00 099 102 20  - -
SNAP RING
R 8 DIN 71805 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE		 001 - -
163 HEX. NUT
FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE		 001 A 18 999 000 51  - -
164 SNAP RING
R 8 DIN 71805 FOR CONNECTION OF DOUBLE LEVER AND MIXTURE CONTROLLER, FLAP-TYPE		 001 - -
165 RELEASE SPRING 001 A 18 199 303 10  - $25.56
166 CONNECTING BRACKET
FOR RELEASE SPRING		 001 A 18 907 502 40  - -
167 BRACKET 001 A 18 907 200 40  - -
168 LOCK WASHER
B 6 DIN 127 FOR BRACKET AT SUCTION PIPE		 002 - -
169 HEX.-HD. SCREW
M 6X15 DIN 933-8 G FOR BRACKET AT SUCTION PIPE		 002 - -

PRESSURE PIPES		 - XXX XXX XXX XXXX - -
180 PRESSURE PIPE
FOR CYLINDER 1		 001 A 18 907 000 33  - $153.72
181 PRESSURE PIPE
FOR CYLINDER 2		 001 A 18 907 001 33  - $153.72
182 PRESSURE PIPE
FOR CYLINDER 3		 001 A 18 907 002 33  - $153.72
183 PRESSURE PIPE
FOR CYLINDER 4		 001 A 18 907 003 33  - $153.72
184 PRESSURE PIPE
FOR CYLINDER 5		 001 A 18 907 004 33  - $153.72
185 PRESSURE PIPE
FOR CYLINDER 6		 001 A 18 907 005 33  - $153.72
186 PIPE CLAMP HALF
FOR PRESSURE PIPES AT CYLINDER HEAD FROM		 001 A 18 907 001 40  - -
186a PIPE CLAMP HALF
FOR PRESSURE PIPES AT CYLINDER HEAD FROM FOR AIR CONDITIONING SYSTEM		 001 A 18 907 002 40  - -
187 SEALING RING
A 12X16 DIN 7603 A1 FOR PIPE CLAMP HALF AT CYLINDER HEAD		 001 - -
188 HEX.-HD. SCREW
M 12 X 1,5 X 15 DIN 961-8 G FOR PIPE CLAMP HALF AT CYLINDER HEAD		 001 - -
199 PIPE CLAMP HALF
FOR PRESSURE PIPES AT PIPE CLAMP, CYLINDER HEAD		 001 A 18 907 800 85  - -
200 LOCK WASHER
B 6 DIN 127 FOR PRESSURE PIPES AT PIPE CLAMP, CYLINDER HEAD		 002 - -
201 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR PRESSURE PIPES AT PIPE CLAMP, CYLINDER HEAD		 002 - -
202 PIPE CLAMP HALF
FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4		 006 A 18 907 800 85  - -
203 LOCK WASHER
B 6 DIN 127 FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4		 006 - -
204 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4		 006 - -
204a HEX. NUT
M 6 DIN 934-5 S FOR HOLDING OF PRESSURE PIPES, CYLINDERS 1 - 4		 006 - -
205 FIXING CLAMP
FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE		 002 A 18 999 500 07  - -
RUBBER HOSE, 30 MM LONG
FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE
Replaced by: A  186 997 20 82		 - A 18 999 702 82  - -
206 RUBBER HOSE, 30 MM LONG
FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE		 002 A 18 699 720 82  - -
207 LOCK WASHER
B 6 DIN 127 FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATER PIPE		 002 - -
208 HEX.-HD. SCREW
M 6X20 DIN 933-8 G FOR PRESSURE PIPE, CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR, AT BRACKET FOR COOLING WATE		 002 - -
209 FIXING CLAMP
FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINNDER HEAD, REAR		 001 A 18 999 500 07  - -
RUBBER HOSE, 30 MM LONG
FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR
Replaced by: A  186 997 20 82		 - A 18 999 702 82  - -
210 RUBBER HOSE, 30 MM LONG
FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR		 001 A 18 699 720 82  - -
211 LOCK WASHER
B 6 DIN 127 FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR		 001 - -
212 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUUM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REA		 001 - -
213 HEX. NUT
M 6 DIN 934-5 S FOR HOLDING PRESSURE PIPE CYLINDERS 5 - 6 AND VACUNM PIPE, IGNITION DISTRIBUTOR AT CYLINDER HEAD, REAR		 001 - -
215 FUEL PIPE
FOR CONNECTION AT FUEL FEED PUMP		 001 A 19 807 005 32  - $28.51
216 FUEL PIPE
FROM FUEL FEED PUMP TO FILTER		 001 A 18 907 002 32  - -
REPLACED BY 189 070 03 32
THE SCREWED NIPPLE AT THE INJECTION PUMP HAS TO BE LAID TO THE INTERIOR SIDE UP TO ENGINE 8500282
Replaced by: A  189 070 03 32		 - A 19 907 001 32  - -
FUEL PIPE
THE SCREWED NIPPLE AT THE INJECTION PUMP HAS TO BE LAID TO THE INTERIOR SIDE UP TO ENGINE 8500065
Replaced by: A  189 070 03 32		 - A 19 907 001 32  - -
217 FUEL PIPE
FROM FILTER TO INJECTION PUMP FROM ENGINE 8500283		 - A 18 907 003 32  - $50.25
217 FUEL PIPE
FROM FILTER TO INJECTION PUMP FROM ENGINE 8500066		 - A 18 907 003 32  - $50.25
218 VACUUM PIPE
FROM MIXTURE CONTROLLER FLAP-TYPE TO INJECTION PUMP GOVERNOR		 001 A 18 907 000 32  - -
219 RUBBER HOSE
12X18X260 MM LANG N 272 FOR AUXILIARY AIR PIPE FROM AIR FILTER TO INJECTION PUMP GOVERNOR ÔRDER BY THE METER		 001 - -
220 HOSE CLAMP
S 18/9 ZY N 288 A FOR AUXILIARY AIR PIPE FROM AIR FILTER TO INJECTION PUMP GOVERNOR		 002 - -
221 ANNULAR FITTING
FOR AUXILIARY AIR PIPE FROM AIR FILTER TO INJECTION PUMP GOVERNOR		 001 A 18 999 000 88  - -
REPLACED BY
189 070 01 80 TOGETHER WITH 1 AUXILIARY AIR PIPE 189 070 02 80 2 BOX NUT 10 M 18X1,5 DIN 7606 1 RUBBER HOSE 12X18X80-MM		 - A 18 907 000 80  - -
REPLACED BY
189 070 01 80 TOGETHER WITH 1 AUXILIARY AIR PIPE 189 070 02 80 2 BOX NUT 10 M 18X1,5 DIN 7606 1 RUBBER HOSE 12X18X80-MM		 - A 18 907 000 80  - -
222 AUXILIARY AIR PIPE
TO INJECTION PUMP GOVERNOR FROM ENGINE 8500371		 - A 18 907 001 80  - -
222 AUXILIARY AIR PIPE
TO INJECTION PUMP GOVERNOR FROM ENGINE 8500086		 - A 18 907 001 80  - -
223 AUXILIARY AIR PIPE
FOR MIXTURE CONTROLLER, FLAP-TYPE FROM ENGINE 8500371		 - A 18 907 002 80  - -
223 AUXILIARY AIR PIPE
FOR MIXTURE CONTROLLER, FLAP-TYPE FROM ENGINE 8500086		 - A 18 907 002 80  - -
224 BOX NUT
10 M 18X1,5 DIN 7606 FOR AUXILIARY AIR PIPE AT MIXTURE CONTROLLER AND INJECTION PUMP GOVERNOR FROM ENGINE 8500371		 - - -
224 BOX NUT
10 M 18X1,5 DIN 7606 FOR AUXILIARY AIR PIPE AT MIXTURE CONTROLLER AND INJECTION PUMP GOVERNOR FROM ENGINE 8500086		 - - -
225 RUBBER HOSE
12X18X80 MM LANG N 272 FOR CONNECTION OF AUXILIARY AIR PIPE ORDER BY THE METER FROM ENGINE 8500371		 - - -
225 RUBBER HOSE
12X18X80 MM LANG N 272 FOR CONNECTION OF AUXILIARY AIR PIPE ORDER BY THE METER FROM ENGINE 8500086		 - - -
226 HOSE CLAMP
S 18/9 ZY N 288 A FOR CONNECTION OF AUXILIARY AIR PIPE FROM ENGINE 8500371		 - - -
226 HOSE CLAMP
S 18/9 ZY N 288 A FOR CONNECTION OF AUXILIARY AIR PIPE FROM ENGINE 8500086		 - - -
227 FIXING CLAMP
FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE		 001 A 18 999 500 42  - -
228 HOSE
B 8X12X25 MM LANG DIN 73379 FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE ORDER BY THE METER		 001 - -
229 LOCK WASHER
B 6 DIN 127 FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE		 001 - -
230 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR AUXILIARY AIR PIPE AND VACUUM PIPE AT BRACKET, COOLING WATER PIPE		 001 - -
235 BRACKET
FOR AIR PIPE		 001 A 18 909 000 41  - -
236 PIPE CLAMP
FOR AIR PIPE		 001 A 18 999 501 07  - -
237 HOSE
B 8X12X25 MM LANG DIN 73379 ORDER BY THE METER		 001 - -
238 LOCK WASHER
B 6 DIN 127 FOR PIPE CLAMP AT BRACKET FOR AIR PIPE		 001 - -
239 HEX.-HD. SCREW
M 6X12 DIN 933-8 G FOR PIPE CLAMP AT BRACKET FOR AIR PIPE		 001 - -
240 FIXING CLAMP
HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE SIDE		 - A 18 999 500 35  - -
RUBBER HOSE, 30 MM LONG
HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE SIDE
Replaced by: A  186 997 20 82		 - A 18 999 702 82  - -
241 RUBBER HOSE, 30 MM LONG
HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE SIDE		 001 A 18 699 720 82  - -
242 HEX.-HD. SCREW
M 6X12 DIN 933-6 G HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTIO		 001 - -
243 LOCK WASHER
B 6 DIN 127 HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION TUBE		 001 - -
244 HEX. NUT
M 6 DIN 934-5 S HOLDING FOR VACUUM PIPE TO INJECTION PUMP GOVERNOR AND VACUUM PIPE TO IGNITION DISTRIBUTOR, AT SUCTION T		 001 - -
DAMPING CONTAINER
FOR RETURN FLOW FROM OVERFLOW VALVE
Replaced by: A  189 070 03 68		 - A 18 907 001 68  - -
245 DAMPING CONTAINER
FOR RETURN FLOW FROM OVERFLOW VALVE		 001 A 18 907 003 68  - -
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.