Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 352.402 - PROPELLER SHAFT Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
| №- | Name | A* | Part number | A | Part number, Price per Unit., $ |
| 003 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 656 MM |
001 | A 35 241 044 02 | - | - |
| 003 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 1247 MM |
001 | A 35 241 001 02 | - | - |
| 013 | UNIVERSAL JOINT YOKE | 001 | A 35 241 000 08 | - | $1 131.26 |
| 016 | GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - | - |
| 016 | GREASE NIPPLE | 001 | N 071412 008102 | - | $1.07 |
| 018 | DRIVE FLANGE | 001 | A 35 241 100 11 | - | $310.38 |
| 020 | UNIVERSAL JOINT CROSS Replaced by: A 385 410 02 31 |
- | A 30 241 000 31 | - | - |
| 020 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
001 | A 38 541 002 31 | - | $294.14 |
| 021 | BEARING BUSHING | - | A 32 241 005 42 | - | - |
| 023 | EXPANSION PLUG | - | A 31 241 112 33 | - | $1.32 |
| 025 | GREASE NIPPLE | 001 | N 071412 008302 | - | $2.08 |
| 030 | SNAP RING AS REQUIRED 2.50 MM |
004 | A 31 299 411 35 | - | $0.94 |
| SNAP RING AS REQUIRED 2.55 MM |
004 | A 31 299 416 35 | - | $0.91 | |
| SNAP RING AS REQUIRED 2.60 MM |
004 | A 31 299 413 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.65 MM |
004 | A 31 299 414 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.70 MM |
004 | A 31 299 415 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.75 MM |
004 | A 31 299 417 35 | - | $0.60 | |
| 032 | SEAL RING | 001 | A 33 741 300 80 | - | - |
| 033 | SEAL HOLDER | 001 | A 32 141 101 58 | - | - |
| DRIVE FLANGE | 001 | A 35 241 100 11 | - | $310.38 | |
| UNIVERSAL JOINT CROSS Replaced by: A 385 410 02 31 |
- | A 30 241 000 31 | - | - | |
| UNIVERSAL JOINT CROSS WITH BUSHINGS |
001 | A 38 541 002 31 | - | $294.14 | |
| BEARING BUSHING | - | A 32 241 005 42 | - | - | |
| EXPANSION PLUG | - | A 31 241 112 33 | - | $1.32 | |
| GREASE NIPPLE | 001 | N 071412 008302 | - | $2.08 | |
| SNAP RING AS REQUIRED 2.50 MM |
004 | A 31 299 411 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.55 MM |
004 | A 31 299 416 35 | - | $0.91 | |
| SNAP RING AS REQUIRED 2.60 MM |
004 | A 31 299 413 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.65 MM |
004 | A 31 299 414 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.70 MM |
004 | A 31 299 415 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.75 MM |
004 | A 31 299 417 35 | - | $0.60 | |
| 045 | BOOT | 001 | A 35 241 000 80 | - | $30.46 |
| 048 | WIRE RING | 002 | A 32 141 100 53 | - | - |
| CLAMP | 002 | N 916002 078100 | - | - | |
| 060 | PROPELLER SHAFT Replaced by: A 352 410 05 02 |
- | A 35 241 040 02 | - | - |
| 060 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE I 1511 MM |
001 | A 35 241 005 02 | - | - |
| 070 | PROPELLER SHAFT Replaced by: A 352 410 53 02 |
- | A 35 241 043 02 | - | - |
| 070 | PROPELLER SHAFT Replaced by: A 674 410 00 02 |
- | A 35 241 053 02 | - | - |
| 070 | PROPELLER SHAFT FROM TRANSFER CASE TO INTERMEDIATE BEARING,REAR AXLE I 1625 MM |
001 | A 67 441 000 02 | - | $1.19 |
| UNIVERSAL JOINT YOKE | 002 | A 30 241 003 08 | - | - | |
| GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - | - | |
| GREASE NIPPLE | 002 | N 071412 008102 | - | $1.07 | |
| DRIVE FLANGE | 002 | A 35 241 100 11 | - | $310.38 | |
| UNIVERSAL JOINT CROSS Replaced by: A 385 410 02 31 |
- | A 30 241 000 31 | - | - | |
| UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 38 541 002 31 | - | $294.14 | |
| BEARING BUSHING | - | A 32 241 005 42 | - | - | |
| EXPANSION PLUG | - | A 31 241 112 33 | - | $1.32 | |
| GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 | |
| SNAP RING AS REQUIRED 2.50 MM |
008 | A 31 299 411 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.55 MM |
008 | A 31 299 416 35 | - | $0.91 | |
| SNAP RING AS REQUIRED 2.60 MM |
008 | A 31 299 413 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.65 MM |
008 | A 31 299 414 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.70 MM |
008 | A 31 299 415 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.75 MM |
008 | A 31 299 417 35 | - | $0.60 | |
| SEAL RING | 002 | A 33 741 300 80 | - | - | |
| SEAL HOLDER | 002 | A 32 141 101 58 | - | - | |
| DRIVE FLANGE | 002 | A 35 241 100 11 | - | $310.38 | |
| DRIVE FLANGE | 002 | A 38 141 108 11 | - | - | |
| UNIVERSAL JOINT CROSS Replaced by: A 385 410 02 31 |
- | A 30 241 000 31 | - | - | |
| UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 38 541 002 31 | - | $294.14 | |
| UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 61 741 000 31 | - | - | |
| BEARING BUSHING | - | A 32 241 005 42 | - | - | |
| EXPANSION PLUG | - | A 31 241 112 33 | - | $1.32 | |
| GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 | |
| SNAP RING AS REQUIRED 2.50 MM |
008 | A 31 299 411 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.55 MM |
008 | A 31 299 416 35 | - | $0.91 | |
| SNAP RING AS REQUIRED 2.60 MM |
008 | A 31 299 413 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.65 MM |
008 | A 31 299 414 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.70 MM |
008 | A 31 299 415 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.75 MM |
008 | A 31 299 417 35 | - | $0.60 | |
| LOCK Replaced by: A 003 994 44 41 |
- | A 00 399 445 41 | - | - | |
| LOCK Replaced by: A 005 994 94 41 |
- | A 00 399 444 41 | - | - | |
| LOCK Replaced by: N 000472 042001 |
- | A 00 599 494 41 | - | - | |
| LOCK RING AS REQUIRED 1.750 MM |
008 | N 000472 042001 | - | $1.91 | |
| LOCK Replaced by: A 005 994 99 41 |
- | A 00 399 450 41 | - | - | |
| LOCK AS REQUIRED 1.875 MM |
008 | A 00 599 499 41 | - | $1.37 | |
| LOCK Replaced by: A 006 994 04 41 |
- | A 00 599 410 41 | - | - | |
| LOCK AS REQUIRED 2.000 MM |
008 | A 00 699 404 41 | - | $1.21 | |
| BOOT | 002 | A 30 241 000 80 | - | - | |
| WIRE RING | 006 | A 32 141 100 53 | - | - | |
| CLAMP | 004 | N 916002 078100 | - | - | |
| 090 | PROPELLER SHAFT Replaced by: A 352 410 52 02 |
- | A 35 241 039 02 | - | - |
| 090 | PROPELLER SHAFT FROM REAR AXLE I TO REAR AXLE II 826 MM |
001 | A 35 241 052 02 | - | - |
| UNIVERSAL JOINT YOKE | 001 | A 35 241 001 08 | - | - | |
| GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - | - | |
| GREASE NIPPLE | 001 | N 071412 008102 | - | $1.07 | |
| UNIVERSAL JOINT CROSS Replaced by: A 385 410 02 31 |
- | A 30 241 000 31 | - | - | |
| UNIVERSAL JOINT CROSS WITH BUSHINGS |
001 | A 38 541 002 31 | - | $294.14 | |
| BEARING BUSHING | - | A 32 241 005 42 | - | - | |
| EXPANSION PLUG | - | A 31 241 112 33 | - | $1.32 | |
| GREASE NIPPLE | 001 | N 071412 008302 | - | $2.08 | |
| SNAP RING AS REQUIRED 2.50 MM |
004 | A 31 299 411 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.55 MM |
004 | A 31 299 416 35 | - | $0.91 | |
| SNAP RING AS REQUIRED 2.60 MM |
004 | A 31 299 413 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.65 MM |
004 | A 31 299 414 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.70 MM |
004 | A 31 299 415 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.75 MM |
004 | A 31 299 417 35 | - | $0.60 | |
| SEAL RING | 001 | A 33 741 300 80 | - | - | |
| SEAL HOLDER | 001 | A 32 141 101 58 | - | - | |
| UNIVERSAL JOINT CROSS Replaced by: A 385 410 02 31 |
- | A 30 241 000 31 | - | - | |
| UNIVERSAL JOINT CROSS WITH BUSHINGS |
001 | A 38 541 002 31 | - | $294.14 | |
| BEARING BUSHING | - | A 32 241 005 42 | - | - | |
| EXPANSION PLUG | - | A 31 241 112 33 | - | $1.32 | |
| GREASE NIPPLE | 001 | N 071412 008302 | - | $2.08 | |
| SNAP RING AS REQUIRED 2.50 MM |
004 | A 31 299 411 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.55 MM |
004 | A 31 299 416 35 | - | $0.91 | |
| SNAP RING AS REQUIRED 2.60 MM |
004 | A 31 299 413 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.65 MM |
004 | A 31 299 414 35 | - | $0.74 | |
| SNAP RING AS REQUIRED 2.70 MM |
004 | A 31 299 415 35 | - | $0.94 | |
| SNAP RING AS REQUIRED 2.75 MM |
004 | A 31 299 417 35 | - | $0.60 | |
| BOOT | 001 | A 30 241 000 80 | - | - | |
| WIRE RING | 003 | A 32 141 100 53 | - | - | |
| CLAMP | 002 | N 916002 078100 | - | - | |
| 202 | SCREW Replaced by: A 352 990 47 01 |
- | A 35 299 004 01 | - | - |
| 202 | SCREW Replaced by: A 007 990 10 01 |
- | A 35 299 047 01 | - | - |
| 202 | SCREW TO MOUNT THE PROPELLER SHAFTS |
064 | A 00 799 010 01 | - | $3.81 |
| 203 | LOCK WASHER TO MOUNT THE PROPELLER SHAFTS |
064 | N 912004 010102 | - | $0.45 |
| 204 | NUT TO MOUNT THE PROPELLER SHAFTS |
064 | N 000934 010010 | - | - |
- To find out where to buy the item or equivalent, click on the part number.