Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 380.183 - PROPELLER SHAFT Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
№- | Name | A* | Part number | A | Part number, Price per Unit., $ |
345 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 573 MM |
001 | A 38 341 053 02 | - | - |
345 | PROPELLER SHAFT Replaced by: A 674 410 22 02 |
- | A 38 341 010 02 | - | - |
345 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 640 MM |
001 | A 67 441 022 02 | - | $1.19 |
348 | DRIVE FLANGE | 002 | A 35 441 100 11 | - | $301.61 |
348 | DRIVE FLANGE | 002 | A 38 141 108 11 | - | - |
351 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 38 541 001 31 | - | $416.22 |
351 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 61 741 000 31 | - | - |
351 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 00 041 040 31 | - | $294.13 |
354 | NEEDLE SET = 144 PIECES |
002 | A 38 198 104 87 | - | - |
357 | GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 |
360 | SNAP RING AS REQUIRED 2.80 MM |
008 | A 33 799 450 35 | - | $14.00 |
360 | SNAP RING AS REQUIRED 2.85 MM |
008 | A 33 799 454 35 | - | - |
360 | SNAP RING AS REQUIRED 2.90 MM |
008 | A 33 799 451 35 | - | $5.24 |
360 | SNAP RING AS REQUIRED 2.95 MM |
008 | A 33 799 452 35 | - | $2.36 |
360 | SNAP RING AS REQUIRED 3.00 MM |
008 | A 33 799 453 35 | - | $2.88 |
360 | LOCK RING AS REQUIRED 1.750 MM |
008 | N 000472 042001 | - | $1.91 |
360 | LOCK AS REQUIRED 1.875 MM |
008 | A 00 599 499 41 | - | $1.37 |
360 | LOCK AS REQUIRED 2.000 MM |
008 | A 00 699 404 41 | - | $1.21 |
363 | BOOT | 001 | A 38 141 001 80 | - | $59.85 |
366 | WIRE RING | 002 | A 32 141 100 53 | - | - |
369 | CLAMP 78 MM |
001 | N 916002 078100 | - | - |
372 | CLAMP 98 MM |
001 | N 916002 098100 | - | - |
GREASE NIPPLE Replaced by: N 071412 008102 |
- | N 071412 008101 | - | - | |
GREASE NIPPLE | 001 | N 071412 008102 | - | $1.07 | |
460 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1355 MM |
001 | A 38 541 051 07 | - | $2.39 |
460 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1250 MM |
001 | A 38 541 053 07 | - | $2.39 |
460 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1085 MM |
001 | A 38 541 060 07 | - | - |
463 | DRIVE FLANGE Replaced by: A 385 411 17 11 |
- | A 36 041 106 11 | - | $123.24 |
463 | DRIVE FLANGE | 002 | A 38 541 117 11 | - | $304.81 |
466 | UNIVERSAL JOINT CROSS Replaced by: A 381 410 02 31 |
- | A 38 541 005 31 | - | - |
466 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 38 141 002 31 | - | $363.59 |
466 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 97 341 000 31 | - | $325.39 |
469 | GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 |
472 | LOCK AS REQUIRED 1.65 MM |
008 | A 00 699 406 41 | - | - |
472 | LOCK AS REQUIRED 1.70 MM |
008 | A 00 699 408 41 | - | - |
472 | LOCK RING AS REQUIRED 1.75 MM |
008 | N 000472 048000 | - | $1.91 |
472 | LOCK AS REQUIRED 1.80 MM |
008 | A 00 699 412 41 | - | $1.21 |
472 | LOCK AS REQUIRED 1.85 MM |
008 | A 00 699 414 41 | - | $1.05 |
472 | LOCK AS REQUIRED 1.90 MM |
008 | A 00 399 436 41 | - | - |
SEAL RING PROTECTIVE TUBE |
001 | A 38 541 100 59 | - | $16.80 | |
PLUG | 001 | N 900087 008000 | - | $1.40 | |
490 | PROPELLER SHAFT Replaced by: A 674 410 15 02 |
- | A 38 141 069 02 | - | - |
490 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 1108 MM |
001 | A 67 441 015 02 | - | $1.19 |
490 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 1190 MM |
001 | A 38 141 001 02 | - | - |
493 | DRIVE FLANGE Replaced by: A 352 411 00 11 |
- | A 38 141 100 11 | - | - |
493 | DRIVE FLANGE | 002 | A 35 241 100 11 | - | $310.38 |
493 | DRIVE FLANGE | 002 | A 38 141 108 11 | - | - |
496 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 38 541 002 31 | - | $294.14 |
496 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 61 741 000 31 | - | - |
496 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 00 041 040 31 | - | $294.13 |
499 | NEEDLE SET = 132 PIECES |
002 | A 31 898 102 87 | - | $34.83 |
502 | GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 |
505 | SNAP RING AS REQUIRED 2.50 MM |
008 | A 31 299 411 35 | - | $0.94 |
505 | SNAP RING AS REQUIRED 2.55 MM |
008 | A 31 299 416 35 | - | $0.91 |
505 | SNAP RING AS REQUIRED 2.60 MM |
008 | A 31 299 413 35 | - | $0.74 |
505 | SNAP RING AS REQUIRED 2.65 MM |
008 | A 31 299 414 35 | - | $0.74 |
505 | SNAP RING AS REQUIRED 2.70 MM |
008 | A 31 299 415 35 | - | $0.94 |
505 | SNAP RING AS REQUIRED 2.75 MM |
008 | A 31 299 417 35 | - | $0.60 |
505 | LOCK RING AS REQUIRED 1.750 MM |
008 | N 000472 042001 | - | $1.91 |
505 | LOCK AS REQUIRED 1.875 MM |
008 | A 00 599 499 41 | - | $1.37 |
505 | LOCK AS REQUIRED 2.000 MM |
008 | A 00 699 404 41 | - | $1.21 |
508 | BOOT | 001 | A 38 141 001 80 | - | $59.85 |
511 | WIRE RING | 003 | A 32 141 100 53 | - | - |
514 | CLAMP 78 MM |
001 | N 916002 078100 | - | - |
517 | CLAMP 98 MM |
001 | N 916002 098100 | - | - |
520 | SCREW Replaced by: A 352 990 47 01 |
- | A 35 299 004 01 | - | - |
520 | SCREW Replaced by: A 007 990 10 01 |
- | A 35 299 047 01 | - | - |
520 | SCREW TO MOUNT THE PROPELLER SHAFTS M 10X30 |
032 | A 00 799 010 01 | - | $3.81 |
520 | SCREW TO MOUNT THE PROPELLER SHAFTS M 10X30 |
032 | A 00 799 010 01 | - | $3.81 |
520 | SCREW Replaced by: A 360 990 30 01 |
- | A 36 099 019 01 | - | - |
520 | SCREW TO MOUNT THE PROPELLER SHAFTS M 12X36 |
016 | A 36 099 030 01 | - | - |
525 | LOCK WASHER TO MOUNT THE PROPELLER SHAFTS |
032 | N 912004 010102 | - | $0.45 |
525 | LOCK WASHER TO MOUNT THE PROPELLER SHAFTS |
032 | N 912004 010102 | - | $0.45 |
525 | LOCK WASHER TO MOUNT THE PROPELLER SHAFTS |
016 | N 912004 012100 | - | $0.62 |
530 | NUT Replaced by: N 308673 010000 |
- | N 000934 010015 | - | - |
530 | NUT TO MOUNT THE PROPELLER SHAFTS |
032 | N 308673 010000 | - | $1.58 |
530 | NUT TO MOUNT THE PROPELLER SHAFTS |
032 | N 308673 010000 | - | $1.58 |
530 | NUT TO MOUNT THE PROPELLER SHAFTS |
016 | N 000934 012034 | - | - |
- To find out where to buy the item or equivalent, click on the part number.