Geri Dön
* In the column 'A' indicates the number that is used in the selected vehicle.
- To find out where to buy the item or equivalent, click on the part number.
FG 385.144 - PROPELLER SHAFT Yedek Parça ve Yedek Parça Fiyatları - Santana Otomotiv
№- | Name | A* | Part number | A | Part number, Price per Unit., $ |
160 | PROPELLER SHAFT Replaced by: A 674 410 22 02 |
- | A 38 341 010 02 | - | - |
160 | PROPELLER SHAFT Replaced by: A 674 410 22 02 |
- | A 38 341 056 02 | - | - |
160 | PROPELLER SHAFT FROM TRANSMISSION TO TRANSFER CASE 640 MM |
001 | A 67 441 022 02 | - | $1.19 |
162 | DRIVE FLANGE | 002 | A 35 441 100 11 | - | $301.61 |
162 | DRIVE FLANGE | 002 | A 38 141 108 11 | - | - |
164 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 38 541 001 31 | - | $416.22 |
164 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 61 741 000 31 | - | - |
164 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 00 041 040 31 | - | $294.13 |
BEARING BUSHING | 008 | A 38 341 000 42 | - | - | |
168 | NEEDLE Replaced by: A 381 981 04 87 |
- | A 00 098 171 87 | - | - |
168 | NEEDLE SET = 144 PIECES |
002 | A 38 198 104 87 | - | - |
EXPANSION PLUG | 008 | A 33 741 100 33 | - | - | |
174 | GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 |
176 | SNAP RING AS REQUIRED 2.80 MM |
008 | A 33 799 450 35 | - | $14.00 |
176 | SNAP RING AS REQUIRED 2.85 MM |
008 | A 33 799 454 35 | - | - |
176 | SNAP RING AS REQUIRED 2.90 MM |
008 | A 33 799 451 35 | - | $5.24 |
176 | SNAP RING AS REQUIRED 2.95 MM |
008 | A 33 799 452 35 | - | $2.36 |
176 | SNAP RING AS REQUIRED 3.00 MM |
008 | A 33 799 453 35 | - | $2.88 |
176 | LOCK Replaced by: A 003 994 44 41 |
- | A 00 399 445 41 | - | - |
176 | LOCK Replaced by: A 005 994 94 41 |
- | A 00 399 444 41 | - | - |
176 | LOCK Replaced by: N 000472 042001 |
- | A 00 599 494 41 | - | - |
176 | LOCK RING AS REQUIRED 1.750 MM |
008 | N 000472 042001 | - | $1.91 |
176 | LOCK Replaced by: A 005 994 99 41 |
- | A 00 399 450 41 | - | - |
176 | LOCK AS REQUIRED 1.875 MM |
008 | A 00 599 499 41 | - | $1.37 |
176 | LOCK Replaced by: A 006 994 04 41 |
- | A 00 599 410 41 | - | - |
176 | LOCK AS REQUIRED 2.000 MM |
008 | A 00 699 404 41 | - | $1.21 |
180 | BOOT Replaced by: A 381 410 01 80 |
- | A 38 141 000 80 | - | - |
180 | BOOT | 001 | A 38 141 001 80 | - | $59.85 |
181 | WIRE RING | 002 | A 32 141 100 53 | - | - |
182 | CLAMP 78 MM |
001 | N 916002 078100 | - | - |
183 | CLAMP 98 MM |
001 | N 916002 098100 | - | - |
185 | PROPELLER SHAFT Replaced by: A 385 410 53 07 |
- | A 30 741 012 02 | - | - |
185 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1250 MM |
001 | A 38 541 053 07 | - | $2.39 |
185 | PROPELLER SHAFT Replaced by: A 385 410 51 07 |
- | A 30 741 013 02 | - | - |
185 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1355 MM |
001 | A 38 541 051 07 | - | $2.39 |
185 | PROPELLER SHAFT FROM TRANSFER CASE TO REAR AXLE 1190 MM |
001 | A 38 541 046 07 | - | $2.39 |
187 | DRIVE FLANGE Replaced by: A 385 411 17 11 |
- | A 36 041 106 11 | - | $123.24 |
187 | DRIVE FLANGE | 002 | A 38 541 117 11 | - | $304.81 |
189 | UNIVERSAL JOINT CROSS Replaced by: A 385 410 05 31 |
- | A 36 041 002 31 | - | - |
189 | UNIVERSAL JOINT CROSS Replaced by: A 381 410 02 31 |
- | A 38 541 005 31 | - | - |
189 | UNIVERSAL JOINT CROSS Replaced by: A 973 410 00 31 |
- | A 38 141 002 31 | - | $363.59 |
189 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 97 341 000 31 | - | $325.39 |
BEARING BUSHING | 008 | A 36 041 001 42 | - | - | |
BEARING BUSHING Replaced by: A 385 410 08 42 |
- | A 38 541 002 42 | - | - | |
BEARING BUSHING | 008 | A 38 541 008 42 | - | - | |
BEARING BUSHING | 008 | A 38 541 007 42 | - | - | |
BEARING BUSHING | 008 | A 38 541 010 42 | - | - | |
193 | NEEDLE Replaced by: A 381 981 04 87 |
- | A 00 098 171 87 | - | - |
193 | NEEDLE SET = 144 PIECES |
002 | A 38 198 104 87 | - | - |
SEAL RING | 008 | A 00 899 709 46 | - | - | |
EXPANSION PLUG | 008 | A 36 041 102 33 | - | - | |
197 | GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 |
198 | LOCK Replaced by: A 006 994 06 41 |
- | A 00 299 412 41 | - | - |
198 | LOCK AS REQUIRED 1.65 MM |
008 | A 00 699 406 41 | - | - |
198 | LOCK Replaced by: A 006 994 08 41 |
- | A 00 299 413 41 | - | - |
198 | LOCK AS REQUIRED 1.70 MM |
008 | A 00 699 408 41 | - | - |
198 | LOCK Replaced by: N 000472 048000 |
- | A 00 299 414 41 | - | - |
198 | LOCK RING AS REQUIRED 1.75 MM |
008 | N 000472 048000 | - | $1.91 |
198 | LOCK Replaced by: A 006 994 12 41 |
- | A 00 299 417 41 | - | - |
198 | LOCK AS REQUIRED 1.80 MM |
008 | A 00 699 412 41 | - | $1.21 |
198 | LOCK Replaced by: A 006 994 14 41 |
- | A 00 299 418 41 | - | - |
198 | LOCK AS REQUIRED 1.85 MM |
008 | A 00 699 414 41 | - | $1.05 |
198 | LOCK AS REQUIRED 1.90 MM |
008 | A 00 399 436 41 | - | - |
199 | PLUG | 001 | N 900087 008000 | - | $1.40 |
206 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 1150 MM |
001 | A 38 141 007 02 | - | - |
206 | PROPELLER SHAFT Replaced by: A 674 410 15 02 |
- | A 38 141 069 02 | - | - |
206 | PROPELLER SHAFT FROM TRANSFER CASE TO FRONT AXLE 1108 MM |
001 | A 67 441 015 02 | - | $1.19 |
208 | DRIVE FLANGE Replaced by: A 352 411 00 11 |
- | A 38 141 100 11 | - | - |
208 | DRIVE FLANGE | 002 | A 35 241 100 11 | - | $310.38 |
208 | DRIVE FLANGE | 002 | A 38 141 108 11 | - | - |
210 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 38 541 002 31 | - | $294.14 |
210 | UNIVERSAL JOINT CROSS Replaced by: A 000 410 40 31 |
- | A 61 741 000 31 | - | - |
210 | UNIVERSAL JOINT CROSS WITH BUSHINGS |
002 | A 00 041 040 31 | - | $294.13 |
BEARING BUSHING | 008 | A 32 241 005 42 | - | - | |
212 | NEEDLE Replaced by: A 318 981 02 87 |
- | A 00 098 150 87 | - | - |
212 | NEEDLE SET = 164 PIECES |
002 | A 31 898 102 87 | - | $34.83 |
EXPANSION PLUG | 008 | A 31 241 112 33 | - | $1.32 | |
214 | GREASE NIPPLE | 002 | N 071412 008302 | - | $2.08 |
216 | SNAP RING AS REQUIRED 2.50 MM |
008 | A 31 299 411 35 | - | $0.94 |
216 | SNAP RING AS REQUIRED 2.55 MM |
008 | A 31 299 416 35 | - | $0.91 |
216 | SNAP RING AS REQUIRED 2.60 MM |
008 | A 31 299 413 35 | - | $0.74 |
216 | SNAP RING AS REQUIRED 2.65 MM |
008 | A 31 299 414 35 | - | $0.74 |
216 | SNAP RING AS REQUIRED 2.70 MM |
008 | A 31 299 415 35 | - | $0.94 |
216 | SNAP RING AS REQUIRED 2.75 MM |
008 | A 31 299 417 35 | - | $0.60 |
216 | LOCK Replaced by: A 003 994 44 41 |
- | A 00 399 445 41 | - | - |
216 | LOCK Replaced by: A 005 994 94 41 |
- | A 00 399 444 41 | - | - |
216 | LOCK Replaced by: N 000472 042001 |
- | A 00 599 494 41 | - | - |
216 | LOCK RING AS REQUIRED 1.750 MM |
008 | N 000472 042001 | - | $1.91 |
216 | LOCK Replaced by: A 005 994 99 41 |
- | A 00 399 450 41 | - | - |
216 | LOCK AS REQUIRED 1.875 MM |
008 | A 00 599 499 41 | - | $1.37 |
216 | LOCK Replaced by: A 006 994 04 41 |
- | A 00 599 410 41 | - | - |
216 | LOCK AS REQUIRED 2.000 MM |
008 | A 00 699 404 41 | - | $1.21 |
230 | BOOT Replaced by: A 381 410 01 80 |
- | A 38 141 000 80 | - | - |
230 | BOOT | 001 | A 38 141 001 80 | - | $59.85 |
232 | WIRE RING | 002 | A 32 141 100 53 | - | - |
232 | WIRE RING | 003 | A 32 141 100 53 | - | - |
234 | CLAMP 78 MM |
001 | N 916002 078100 | - | - |
236 | CLAMP 98 MM |
001 | N 916002 098100 | - | - |
245 | SCREW Replaced by: A 360 990 30 01 |
- | A 36 099 019 01 | - | - |
245 | SCREW PROPELLER SHAFT TO TRANSFER CASE AND TO REAR AXLE M 12X36 |
016 | A 36 099 030 01 | - | - |
247 | LOCK WASHER PROPELLER SHAFT TO TRANSFER CASE AND TO REAR AXLE |
016 | N 912004 012100 | - | $0.62 |
249 | NUT PROPELLER SHAFT TO TRANSFER CASE AND TO REAR AXLE |
016 | N 000934 012034 | - | - |
251 | SCREW Replaced by: A 352 990 47 01 |
- | A 35 299 004 01 | - | - |
251 | SCREW Replaced by: A 007 990 10 01 |
- | A 35 299 047 01 | - | - |
251 | SCREW PROPELLER SHAFT TO TRANSMISSION, TRANSFER CASE & FRONT AXLE M 10X30 |
032 | A 00 799 010 01 | - | $3.81 |
253 | LOCK WASHER PROPELLER SHAFT TO TRANSMISSION, TRANSFER CASE & FRONT AXLE |
032 | N 912004 010102 | - | $0.45 |
255 | NUT PROPELLER SHAFT TO TRANSMISSION, TRANSFER CASE & FRONT AXLE |
032 | N 000934 010010 | - | - |
- To find out where to buy the item or equivalent, click on the part number.